[Bug] Unable to access using ipv6 address

[joney888999]

Contact Information

No response

1Panel Version

v1.10.21-lts

Problem Description

使用ipv6地址加端口无法访问，我已经关闭了安全入口

Steps to Reproduce

使用ipv4可以访问

使用ipv6无法访问

The expected correct result

No response

Related log output

No response

Additional Information

No response

[wanghe-fit2cloud]

Thanks for your feedback! You can try using 1pctl listen-ip ipv6 to switch to IPv6 mode, then access 1Panel through your browser.

You can use `netstat -tunlp` to check if 1Panel is already listening on an IPv6 address.

[joney888999]

可以了，谢谢

[1Panel-bot]

Bot detected the issue body's language is not English, translate it automatically. 👯👭🏻🧑‍🤝‍🧑👫🧑🏿‍🤝‍🧑🏻👩🏾‍🤝‍👨🏿👬🏿

---

That's ok, thank you

[joney888999]

刚刚能访问过了一会又访问不了，执行netstat -tunlp输出如下：

[1Panel-bot]

Bot detected the issue body's language is not English, translate it automatically. 👯👭🏻🧑‍🤝‍🧑👫🧑🏿‍🤝‍🧑🏻👩🏾‍🤝‍👨🏿👬🏿

---

After being able to access it for a while, I can no longer access it. When I execute netstat -tunlp, the output is as follows:

[wanghe-fit2cloud]

可以使用 1pctl status 命令查看系统运行状态。如果显示为 running 且端口正常绑定，建议优先排查服务器的网络环境是否存在问题。

[1Panel-bot]

Bot detected the issue body's language is not English, translate it automatically. 👯👭🏻🧑‍🤝‍🧑👫🧑🏿‍🤝‍🧑🏻👩🏾‍🤝‍👨🏿👬🏿

---

You can use the 1pctl status command to view the system running status. If it is displayed as running and the port is bound normally, it is recommended to first check whether there is any problem with the server's network environment.