Filament tray, nozzle holder and tool holder. #5
Replies: 6 comments 2 replies
-
|
Thanks, looks pretty cool with the black filament :) |
Beta Was this translation helpful? Give feedback.
-
|
"You can't hold the T-Nuts behind the holder." - fyi: there are T-nuts you can screw on, place them in the profile and then they lock themselves up while turning the screw. So you also don't have to remove the cap at the end of a profile to get them inserted, which is also pretty nice. |
Beta Was this translation helpful? Give feedback.
-
|
My issue is that I keep everything in zip lock bags and shoe boxes, so it's just nice to keep things where they are used.
I want to upgrade to stainless Steel nozzles, so when I do that I won't need to worry about replacing them.
Interesting about Klipper. I read the link you sent and it says you lose your screen. Is that not a problem?
Get BlueMail for Android
…On 6 Mar 2023, 09:25, at 09:25, "U. D." ***@***.***> wrote:
Thanks, looks pretty cool with the black filament :)
I also saw them and thought about mentioning them, but I wasn't sure if
I should. Would you recommend printing them?
Especially the nozzle holder seems kinda nonsensical to me as I
personally would never store my spare nozzles in an exposed area like
this, I put them in little cans for safer storage.
The tool holder does look kinda useful, but I'd think that it vibrates
too much during printing. Also it might be in the way when I need to
tinker and fix anything again which happens all the time actually..
And the tray I actually wanted to print before I switched to Klipper,
but Klipper positions the nozzle over the front left corner in parking
position, so I guess there's no need for me personally to print out
that one..
--
Reply to this email directly or view it on GitHub:
#5 (comment)
You are receiving this because you authored the thread.
Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Ah ok - well, mine is standing on a little drawer where I keep everything stored in, so that's quite comfortable actually. Remember that you have to use higher print temps when using StainlessSteelNozzles, iirc about 10° higher then you use to print with brass nozzles or so. I just opened a discussion thread for Klipper #6 , so that we have everything in place just in case somebody stumbles across it, so let's talk about your question over there.. |
Beta Was this translation helpful? Give feedback.
-
|
I didn't know that about nozzle temps.
Tx.
Steve.
Ps, I don't know your name.
Get BlueMail for Android
…On 6 Mar 2023, 13:15, at 13:15, "U. D." ***@***.***> wrote:
Ah ok - well, Imine is standing on a little drawer where I keep
everything in, so that's quite comfortable actually.
Remember that you have to use higher print temps when using
StainlessSteelNozzles, iirc about 10° higher then you use to priont
with brass nozzles or so.
I just opened a discussion thread for Klipper #6 , so that we have
everything in place just in case somebody stumbles across it, so let's
talk about your question over there..
--
Reply to this email directly or view it on GitHub:
#5 (comment)
You are receiving this because you authored the thread.
Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
It's mentioned at my page tho - my name is Ulf :) |
Beta Was this translation helpful? Give feedback.
-
|
Nice to meet you Ulf.
Steve.
… On 06/03/2023 14:12 U. D. ***@***.***> wrote:
It's mentioned at my page tho - my name is Ulf :)
—
Reply to this email directly, view it on GitHub (#5 (reply in thread)), or unsubscribe (https://github.com/notifications/unsubscribe-auth/AAMR37TPE6EDVLYVLLWO6YTW2XWFXANCNFSM6AAAAAAVQ24HQI).
You are receiving this because you authored the thread.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Same, Steve :) |
Beta Was this translation helpful? Give feedback.
-
Here are three other Neo Mods I've implemented:
Nozzle holder
https://www.thingiverse.com/thing:4962378
Filament tray
https://www.thingiverse.com/thing:5880981
Very hard to remove the supports and to fit. Slow and easy does it and needs a bit of force at the end. I used a clamp.
Tool holder.
https://www.thingiverse.com/thing:5818938
Also hard to fit. You can't hold the T-Nuts behind the holder. In the end I only used 2 bolts, but that's very solid.
Beta Was this translation helpful? Give feedback.
All reactions