config_complete.toml

#####################
## Refinery Config ##
#####################

# ListenAddr is the IP and port on which to listen for incoming events. Incoming
# traffic is expected to be HTTP, so if using SSL put something like nginx in
# front to do the decryption.
# Should be of the form 0.0.0.0:8080
# Not eligible for live reload.
ListenAddr = "0.0.0.0:8080"

# GRPCListenAddr is the IP and port on which to listen for incoming events over
# gRPC. Incoming traffic is expected to be unencrypted, so if using SSL put
# something like nginx in front to do the decryption.
# Should be of the form 0.0.0.0:9090
# Not eligible for live reload.
GRPCListenAddr = "0.0.0.0:9090"

# PeerListenAddr is the IP and port on which to listen for traffic being
# rerouted from a peer. Peer traffic is expected to be HTTP, so if using SSL
# put something like nginx in front to do the decryption. Must be different from
# ListenAddr
# Should be of the form 0.0.0.0:8081
# Not eligible for live reload.
PeerListenAddr = "0.0.0.0:8081"

# CompressPeerCommunication determines whether refinery will compress span data
# it forwards to peers. If it costs money to transmit data between refinery
# instances (e.g. they're spread across AWS availability zones), then you
# almost certainly want compression enabled to reduce your bill. The option to
# disable it is provided as an escape hatch for deployments that value lower CPU
# utilization over data transfer costs.
CompressPeerCommunication = true

# APIKeys is a list of Honeycomb API keys that the proxy will accept. This list
# only applies to events - other Honeycomb API actions will fall through to the
# upstream API directly.
# Adding keys here causes events arriving with API keys not in this list to be
# rejected with an HTTP 401 error If an API key that is a literal '*' is in the
# list, all API keys are accepted.
# Eligible for live reload.
APIKeys = [
	# "replace-me",
	# "more-optional-keys",
	"*",                   # wildcard accept all keys
	]

# HoneycombAPI is the URL for the upstream Honeycomb API.
# Eligible for live reload.
HoneycombAPI = "https://api.honeycomb.io"

# SendDelay is a short timer that will be triggered when a trace is complete.
# Refinery will wait this duration before actually sending the trace.  The
# reason for this short delay is to allow for small network delays or clock
# jitters to elapse and any final spans to arrive before actually sending the
# trace.  This supports duration strings with supplied units. Set to 0 for
# immediate sends.
# Eligible for live reload.
SendDelay = "2s"

# TraceTimeout is a long timer; it represents the outside boundary of how long
# to wait before sending an incomplete trace. Normally traces are sent when the
# root span arrives. Sometimes the root span never arrives (due to crashes or
# whatever), and this timer will send a trace even without having received the
# root span. If you have particularly long-lived traces you should increase this
# timer. This supports duration strings with supplied units.
# Eligible for live reload.
TraceTimeout = "60s"

# MaxBatchSize is the number of events to be included in the batch for sending
MaxBatchSize = 500

# SendTicker is a short timer; it determines the duration to use to check for traces to send
SendTicker = "100ms"

# LoggingLevel is the level above which we should log. Debug is very verbose,
# and should only be used in pre-production environments. Info is the
# recommended level. Valid options are "debug", "info", "error", and
# "panic"
# Not eligible for live reload.
LoggingLevel = "debug"

# UpstreamBufferSize and PeerBufferSize control how large of an event queue to use
# when buffering events that will be forwarded to peers or the upstream API.
UpstreamBufferSize = 10000
PeerBufferSize = 10000

# DebugServiceAddr sets the IP and port the debug service will run on
# The debug service will only run if the command line flag -d is specified
# The debug service runs on the first open port between localhost:6060 and :6069 by default
# DebugServiceAddr = "localhost:8085"

# AddHostMetadataToTrace determines whether or not to add information about
# the host that Refinery is running on to the spans that it processes.
# If enabled, information about the host will be added to each span with the
# prefix `meta.refinery.`.
# Currently the only value added is 'meta.refinery.local_hostname'.
# Not eligible for live reload
AddHostMetadataToTrace = false

# EnvironmentCacheTTL is the amount of time a cache entry will live that associates
# an API key with an environment name.
# Cache misses lookup the environment name using HoneycombAPI config value.
# Default is 1 hour ("1h").
# Not eligible for live reload.
EnvironmentCacheTTL = "1h"

# QueryAuthToken, if specified, provides a token that must be specified with
# the header "X-Honeycomb-Refinery-Query" in order for a /query request to succeed.
# These /query requests are intended for debugging refinery installations and
# are not typically needed in normal operation.
# Can be specified in the environment as REFINERY_QUERY_AUTH_TOKEN.
# If left unspecified, the /query endpoints are inaccessible.
# QueryAuthToken = "some-random-value"

############################
## Implementation Choices ##
############################

# Each of the config options below chooses an implementation of a Refinery
# component to use. Depending on the choice there may be more configuration
# required below in the section for that choice. Changing implementation choices
# requires a process restart; these changes will not be picked up by a live
# config reload. (Individual config options for a given implementation may be
# eligible for live reload).

# Collector describes which collector to use for collecting traces. The only
# current valid option is "InMemCollector".. More can be added by adding
# implementations of the Collector interface.
Collector = "InMemCollector"

# Logger describes which logger to use for Refinery logs. Valid options are
# "logrus" and "honeycomb". The logrus option will write logs to STDOUT and the
# honeycomb option will send them to a Honeycomb dataset.
Logger = "honeycomb"

# Metrics describes which service to use for Refinery metrics. Valid options are
# "prometheus" and "honeycomb". The prometheus option starts a listener that
# will reply to a request for /metrics. The honeycomb option will send summary
# metrics to a Honeycomb dataset.
Metrics = "honeycomb"

#########################
## Peer Management     ##
#########################

# [PeerManagement]
# Type = "file"
# Peers is the list of all servers participating in this proxy cluster. Events
# will be sharded evenly across all peers based on the Trace ID. Values here
# should be the base URL used to access the peer, and should include scheme,
# hostname (or ip address) and port. All servers in the cluster should be in
# this list, including this host.
# Peers = [
	# "http://127.0.0.1:8081",
	# "http://127.0.0.1:8081",
	# "http://10.1.2.3.4:8080",
	# "http://refinery-1231:8080",
	# "http://peer-3.fqdn" // assumes port 80
# ]

# [PeerManagement]
# Type = "redis"
# RedisHost is is used to connect to redis for peer cluster membership management.
# Further, if the environment variable 'REFINERY_REDIS_HOST' is set it takes
# precedence and this value is ignored.
# Not eligible for live reload.
# RedisHost = "localhost:6379"

# RedisUsername is the username used to connect to redis for peer cluster membership management.
# If the environment variable 'REFINERY_REDIS_USERNAME' is set it takes
# precedence and this value is ignored.
# Not eligible for live reload.
# RedisUsername = ""

# RedisPassword is the password used to connect to redis for peer cluster membership management.
# If the environment variable 'REFINERY_REDIS_PASSWORD' is set it takes
# precedence and this value is ignored.
# Not eligible for live reload.
# RedisPassword = ""

# UseTLS enables TLS when connecting to redis for peer cluster membership management, and sets the MinVersion to 1.2.
# Not eligible for live reload.
# UseTLS = false

# UseTLSInsecure disables certificate checks
# Not eligible for live reload.
# UseTLSInsecure = false

# IdentifierInterfaceName is optional. By default, when using RedisHost, Refinery will use
# the local hostname to identify itself to other peers in Redis. If your environment
# requires that you use IPs as identifiers (for example, if peers can't resolve eachother
# by name), you can specify the network interface that Refinery is listening on here.
# Refinery will use the first unicast address that it finds on the specified network
# interface as its identifier.
# Not eligible for live reload.
# IdentifierInterfaceName = "eth0"

# UseIPV6Identifier is optional. If using IdentifierInterfaceName, Refinery will default to the first
# IPv4 unicast address it finds for the specified interface. If UseIPV6Identifier is used, will use
# the first IPV6 unicast address found.
# UseIPV6Identifier = false

# RedisIdentifier is optional. By default, when using RedisHost, Refinery will use
# the local hostname to identify itself to other peers in Redis. If your environment
# requires that you use IPs as identifiers (for example, if peers can't resolve eachother
# by name), you can specify the exact identifier (IP address, etc) to use here.
# Not eligible for live reload. Overrides IdentifierInterfaceName, if both are set.
# RedisIdentifier = "192.168.1.1"

#########################
## In-Memory Collector ##
#########################

# InMemCollector brings together all the settings that are relevant to
# collecting spans together to make traces.
[InMemCollector]

# The collection cache is used to collect all spans into a trace as well as
# remember the sampling decision for any spans that might come in after the
# trace has been marked "complete" (either by timing out or seeing the root
# span). The number of traces in the cache should be many multiples (100x to
# 1000x) of the total number of concurrently active traces (trace throughput *
# trace duration).
# Eligible for live reload. Growing the cache capacity with a live config reload
# is fine. Avoid shrinking it with a live reload (you can, but it may cause
# temporary odd sampling decisions).
CacheCapacity = 1000

# MaxAlloc is optional. If set, it must be an integer >= 0. 64-bit values are
# supported.
# If set to a non-zero value, once per tick (see SendTicker) the collector
# will compare total allocated bytes to this value. If allocation is too
# high, cache capacity will be reduced and an error will be logged.
# Useful values for this setting are generally in the range of 75%-90% of
# available system memory.
MaxAlloc = 0

###################
## Logrus Logger ##
###################

# LogrusLogger is a section of the config only used if you are using the
# LogrusLogger to send all logs to STDOUT using the logrus package. If you are
# using a different logger (eg honeycomb logger) you can leave all this
# commented out.
[LogrusLogger]

# logrus logger currently has no options!

######################
## Honeycomb Logger ##
######################

# HoneycombLogger is a section of the config only used if you are using the
# HoneycombLogger to send all logs to a Honeycomb Dataset. If you are using a
# different logger (eg file-based logger) you can leave all this commented out.

[HoneycombLogger]

# LoggerHoneycombAPI is the URL for the upstream Honeycomb API.
# Eligible for live reload.
LoggerHoneycombAPI = "https://api.honeycomb.io"

# LoggerAPIKey is the API key to use to send log events to the Honeycomb logging
# dataset. This is separate from the APIKeys used to authenticate regular
# traffic.
# Eligible for live reload.
LoggerAPIKey = "abcd1234"

# LoggerDataset is the name of the dataset to which to send Refinery logs
# Eligible for live reload.
LoggerDataset = "Refinery Logs"

# LoggerSamplerEnabled enables a PerKeyThroughput dynamic sampler for log messages.
# This will sample log messages based on [log level:message] key on a per second throughput basis.
# Not eligible for live reload.
LoggerSamplerEnabled = true

# LoggerSamplerThroughput is the per key per second throughput for the log message dynamic sampler.
# Not eligible for live reload.
LoggerSamplerThroughput = 10

#######################
## Honeycomb Metrics ##
#######################

# HoneycombMetrics is a section of the config only used if you are using the
# HoneycombMetrics to send all metrics to a Honeycomb Dataset. If you are using a
# different metrics service (eg prometheus or metricsd) you can leave all this
# commented out.

[HoneycombMetrics]

# MetricsHoneycombAPI is the URL for the upstream Honeycomb API.
# Eligible for live reload.
MetricsHoneycombAPI = "https://api.honeycomb.io"

# MetricsAPIKey is the API key to use to send log events to the Honeycomb logging
# dataset. This is separate from the APIKeys used to authenticate regular
# traffic.
# Eligible for live reload.
MetricsAPIKey = "abcd1234"

# MetricsDataset is the name of the dataset to which to send Refinery metrics
# Eligible for live reload.
MetricsDataset = "Refinery Metrics"

# MetricsReportingInterval is the frequency (in seconds) to send metric events
# to Honeycomb. Between 1 and 60 is recommended.
# Not eligible for live reload.
MetricsReportingInterval = 3


#####################@##
## Prometheus Metrics ##
#####################@##

[PrometheusMetrics]

# MetricsListenAddr determines the interface and port on which Prometheus will
# listen for requests for /metrics. Must be different from the main Refinery
# listener.
# Not eligible for live reload.
# MetricsListenAddr = "localhost:2112"

###########################
## gRPC ServerParameters ##
###########################

# Reflects: https://pkg.go.dev/google.golang.org/grpc/keepalive#ServerParameters

[GRPCServerParameters]

# MaxConnectionIdle is a duration for the amount of time after which an
# idle connection would be closed by sending a GoAway. Idleness duration is
# defined since the most recent time the number of outstanding RPCs became
# zero or the connection establishment.
# 0s sets duration to infinity which is the default:
# https://github.com/grpc/grpc-go/blob/60a3a7e969c401ca16dbcd0108ad544fb35aa61c/internal/transport/http2_server.go#L217-L219
# Not eligible for live reload.
# MaxConnectionIdle = "1m"

# MaxConnectionAge is a duration for the maximum amount of time a
# connection may exist before it will be closed by sending a GoAway. A
# random jitter of +/-10% will be added to MaxConnectionAge to spread out
# connection storms.
# 0s sets duration to infinity which is the default:
# https://github.com/grpc/grpc-go/blob/60a3a7e969c401ca16dbcd0108ad544fb35aa61c/internal/transport/http2_server.go#L220-L222
# Not eligible for live reload.
# MaxConnectionAge = "0s"

# MaxConnectionAgeGrace is an additive period after MaxConnectionAge after
# which the connection will be forcibly closed.
# 0s sets duration to infinity which is the default:
# https://github.com/grpc/grpc-go/blob/60a3a7e969c401ca16dbcd0108ad544fb35aa61c/internal/transport/http2_server.go#L225-L227
# Not eligible for live reload.
# MaxConnectionAgeGrace = "0s"

# After a duration of this time if the server doesn't see any activity it
# pings the client to see if the transport is still alive.
# If set below 1s, a minimum value of 1s will be used instead.
# 0s sets duration to 2 hours which is the default:
# https://github.com/grpc/grpc-go/blob/60a3a7e969c401ca16dbcd0108ad544fb35aa61c/internal/transport/http2_server.go#L228-L230
# Not eligible for live reload.
# Time = "10s"

# After having pinged for keepalive check, the server waits for a duration
# of Timeout and if no activity is seen even after that the connection is
# closed.
# 0s sets duration to 20 seconds which is the default:
# https://github.com/grpc/grpc-go/blob/60a3a7e969c401ca16dbcd0108ad544fb35aa61c/internal/transport/http2_server.go#L231-L233
# Not eligible for live reload.
# Timeout = "2s"