More documentation needed

[oleg-alexandrov]

This repo needs some more documentation. Some things I can think about are:

• How an ISD (camera model file) is created, and mention the occasional gotcha when it comes to loading kernels from .cub files rather than quiering the spice.
• Mention the WAC sensor (when ready)
• WAC workflow (this is trickier because the image needs preprocessing)
• Ideally a little writeup for each sensor, with an example, perhaps
• Not sure what to say about the CSM philosophy, so using boost::dll to load the library.

[jessemapel]

A whole bunch of stereo testing examples can be found here:

https://github.com/USGS-Astrogeology/usgscsm/wiki/CSM-Stereo-Testing-Examples

There's also test results on Knoten

https://github.com/USGS-Astrogeology/knoten

Some of the notebooks also have processing steps for going from PDS data to sensor model

[jessemapel]

The ALE README has some basic instructions for load/loads

https://github.com/USGS-Astrogeology/ale

The ALE docs also have some more information about data setup

https://ale.readthedocs.io/en/latest/tutorials/quick_start.html

[jessemapel]

ASP's CSM documentation

https://stereopipeline.readthedocs.io/en/latest/examples.html#community-sensor-model-csm

[oleg-alexandrov]

The above doc has CSM examples for linescan and SAR. I just added another one for the Frame sensor, at: https://stereopipeline.readthedocs.io/en/latest/examples.html#example-using-the-usgs-csm-frame-sensor.

[jessemapel]

LRO WAC instructions #365 (comment)