Skip to content

Home

Jump to bottom
Wolfgang edited this page Aug 13, 2024 · 9 revisions

Welcome to the DroneBridge for ESP32 wiki!

  1. Select supported hardware
  2. Wire to the flight controller
  3. Install firmware
  4. Configure DroneBridge for ESP32
  5. Configure Ground Station & Drone
  6. Logging & Debugging
  7. Troubleshooting
  8. For Developers

Example Builds

DroneBridge for ESP32 WiFi Blackbox

DroneBridge for ESP32 blackbox showing UDP and TCP port to connect to in order to receive serial data via UART

Further Support & Donations

If you benefited from this project please consider a donation:

For questions or general chatting regarding DroneBridge for ESP32 please visit the Discord channel

Clone this wiki locally