Compatibility check to js-controller 3.3 and Admin5 React UI

[ioBrokerChecker]

Dear Adapter developer,

with js-controller 3.2 and js-controller 3.3 some additional checks were added to make sure that created objects match to the specifications and also written state values match to the object definition.

If something is not correct this is logged as 'warning' or 'info' log.

Please take the time to verify your adapter by ideally starting with a fresh instance and do some actions and verify the log. If you see a warn log there from these checks please adjust the adapter and fix the relevant cases.

For questions please refer to ioBroker/ioBroker.js-controller#1301

Additionally we are preparing Admin 5 which will have a completely rewritten UI. Please install Admin 5, activate that new UI and verify that the configuration of you adapter works as expected also there.

More informations on Admin 5 can be found in Forum https://forum.iobroker.net/topic/44282/test-adapter-admin-5-0-x-alpha-der-neuen-ui

Please close the issue after you checked it.

Thank you very much for your support!

[123gerald1]

Hallo,
Ich verwende auf meinem System den Adapter "Klipper-Moonraker v0.0.4" zur Steuerung meins 3D Druckers.
Leider bekomme ich jetzt seid dem Systemupdate von js-controller auf 3.3 und des Admin auf 5.1.23 laufend Meldungen im Log.
Können sie den Adapter für den neuen Systemstand anpassen?
Danke für die tolle Arbeit!

`

klipper-moonraker.0	2021-08-26 18:02:09.932	info	[Error catched and send to Sentry, thank you collaborating!] error: State attribute definition missing for + stalls
klipper-moonraker.0	2021-08-26 18:02:09.850	info	State value to set for "klipper-moonraker.0.configfile.config.stepper_y.position_max" has to be type "number" but received type "string"
klipper-moonraker.0	2021-08-26 18:02:09.849	info	State value to set for "klipper-moonraker.0.configfile.config.stepper_y.microsteps" has to be type "number" but received type "string"
klipper-moonraker.0	2021-08-26 18:02:09.847	info	State value to set for "klipper-moonraker.0.configfile.config.stepper_y.homing_speed" has to be type "number" but received type "string"
klipper-moonraker.0	2021-08-26 18:02:09.846	info	State value to set for "klipper-moonraker.0.configfile.config.stepper_y.endstop_pin" has to be type "number" but received type "string"
klipper-moonraker.0	2021-08-26 18:02:09.844	info	State value to set for "klipper-moonraker.0.configfile.config.stepper_y.position_endstop" has to be type "number" but received type "string"
klipper-moonraker.0	2021-08-26 18:02:09.841	info	State value to set for "klipper-moonraker.0.configfile.settings.stepper_x.endstop_pin" has to be type "number" but received type "string"
klipper-moonraker.0	2021-08-26 18:02:09.724	info	State value to set for "klipper-moonraker.0.configfile.config.stepper_z.position_max" has to be type "number" but received type "string"
klipper-moonraker.0	2021-08-26 18:02:09.722	info	State value to set for "klipper-moonraker.0.configfile.config.stepper_z.microsteps" has to be type "number" but received type "string"
klipper-moonraker.0	2021-08-26 18:02:09.721	info	State value to set for "klipper-moonraker.0.configfile.config.stepper_z.position_min" has to be type "number" but received type "string"
klipper-moonraker.0	2021-08-26 18:02:09.719	info	State value to set for "klipper-moonraker.0.configfile.config.stepper_z.endstop_pin" has to be type "number" but received type "string"
klipper-moonraker.0	2021-08-26 18:02:09.718	info	State value to set for "klipper-moonraker.0.configfile.config.stepper_z.position_endstop" has to be type "number" but received type "string"
klipper-moonraker.0	2021-08-26 18:02:09.713	info	State value to set for "klipper-moonraker.0.configfile.settings.stepper_y.endstop_pin" has to be type "number" but received type "string"
klipper-moonraker.0	2021-08-26 18:02:09.482	info	State value to set for "klipper-moonraker.0.configfile.settings.stepper_z.endstop_pin" has to be type "number" but received type "string"
klipper-moonraker.0	2021-08-26 18:02:09.480	info	State value to set for "klipper-moonraker.0.fan.rpm" has to be type "number" but received type "string"
klipper-moonraker.0	2021-08-26 18:02:09.140	info	[Error catched and send to Sentry, thank you collaborating!] error: State attribute definition missing for + rotation_distance
klipper-moonraker.0	2021-08-26 18:02:09.136	info	[Error catched and send to Sentry, thank you collaborating!] error: State attribute definition missing for + full_steps_per_rotation
klipper-moonraker.0	2021-08-26 18:02:09.131	info	[Error catched and send to Sentry, thank you collaborating!] error: State attribute definition missing for + homing_positive_dir
klipper-moonraker.0	2021-08-26 18:02:08.917	info	[Error catched and send to Sentry, thank you collaborating!] error: State attribute definition missing for + sysload

`

[DutchmanNL]

ich schaue es mir bei Gelegenheit an der adapter befindet sich leider noch. in alpha status :)