From 2003702cb159264a1739ae02ef4d7af2754001d0 Mon Sep 17 00:00:00 2001 From: "Jose Carmelo O. Almadrones" Date: Fri, 23 Feb 2024 14:30:29 +0800 Subject: [PATCH] Fix Receiver LED gifs on other pages --- docs/quick-start/binding.md | 8 +++--- docs/quick-start/receivers/axisflying-thor.md | 22 ++++++++-------- docs/quick-start/receivers/betafpv-superd.md | 22 ++++++++-------- .../receivers/betafpv-superd900.md | 22 ++++++++-------- docs/quick-start/receivers/betafpv2400.md | 22 ++++++++-------- docs/quick-start/receivers/betafpv900.md | 22 ++++++++-------- .../quick-start/receivers/firmware-version.md | 4 +-- docs/quick-start/receivers/flash2400.md | 26 +++++++++---------- docs/quick-start/receivers/foxeer2400.md | 22 ++++++++-------- docs/quick-start/receivers/geprc2400.md | 22 ++++++++-------- docs/quick-start/receivers/geprc900.md | 22 ++++++++-------- docs/quick-start/receivers/ghost2400.md | 2 +- .../quick-start/receivers/hglrc-hermes2400.md | 22 ++++++++-------- docs/quick-start/receivers/hglrc-hermes900.md | 22 ++++++++-------- docs/quick-start/receivers/hmep2400.md | 22 ++++++++-------- docs/quick-start/receivers/hmes900.md | 26 +++++++++---------- docs/quick-start/receivers/hmpp2400.md | 4 +-- docs/quick-start/receivers/iflight2400.md | 22 ++++++++-------- docs/quick-start/receivers/iflight900.md | 22 ++++++++-------- docs/quick-start/receivers/jumper-aion.md | 22 ++++++++-------- docs/quick-start/receivers/jumper900.md | 4 +-- docs/quick-start/receivers/matek2400.md | 22 ++++++++-------- docs/quick-start/receivers/r9.md | 4 +-- .../receivers/radiomaster-rp-2400.md | 22 ++++++++-------- docs/quick-start/receivers/siyiFRmini.md | 2 +- docs/quick-start/receivers/updating.md | 22 ++++++++-------- docs/quick-start/receivers/vantac2400.md | 22 ++++++++-------- docs/quick-start/receivers/voyager900.md | 26 +++++++++---------- docs/quick-start/receivers/wiring-up.md | 8 +++--- docs/quick-start/unbricking.md | 4 +-- docs/quick-start/webui.md | 8 +++--- docs/software/loan-model.md | 4 +-- 32 files changed, 263 insertions(+), 263 deletions(-) diff --git a/docs/quick-start/binding.md b/docs/quick-start/binding.md index 605d2e731..6d5b1ce93 100644 --- a/docs/quick-start/binding.md +++ b/docs/quick-start/binding.md @@ -64,7 +64,7 @@ For traditional binding to work, a Binding Phrase must not be set, at least for The Receiver LED should also be blinking when powered up.
-![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) +![LEDSEQ_DISCONNECTED](../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
??? danger "Receiver LED doesn't Blink (click/tap to expand)" @@ -103,7 +103,7 @@ The procedure is as follows: 3. Make sure the LED is doing a quick double-blink, which indicates the receiver is in bind mode.
- ![LEDSEQ_BINDING](https://cdn.discordapp.com/attachments/738450139693449258/921065812763218010/LEDSEQ_BINDING_10_10_10_100.gif) + ![LEDSEQ_BINDING](../assets/images/receiverLED/LEDSEQ_BINDING_10_10_10_100.gif)
4. Power up your transmitter/radio and use the ++"[BIND]"++ button on the ExpressLRS Lua script, which sends out a binding pulse. The Popup will briefly show up and then disappear. @@ -115,7 +115,7 @@ The procedure is as follows: 5. If the receiver LED turned into a solid light, it's bound!
- ![CONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812507373568/LED_ON.gif) + ![CONNECTED](../assets/images/receiverLED/LED_ON.gif)
## Connection Check @@ -154,7 +154,7 @@ Using the [ExpressLRS Lua Script](transmitters/lua-howto.md), look for a `C` in This is also indicated by the Receiver LED as 3 fast blinks then a pause:
- ![LEDSEQ_MODEL_MISMATCH](https://cdn.discordapp.com/attachments/738450139693449258/921065813425934446/LEDSEQ_MODEL_MISMATCH_10_10_10_10_10_100.gif) + ![LEDSEQ_MODEL_MISMATCH](../assets/images/receiverLED/LEDSEQ_MODEL_MISMATCH_10_10_10_10_10_100.gif)
If you've deliberately set up Model Matching following [this page](../software/model-config-match.md), make sure your settings are correct. diff --git a/docs/quick-start/receivers/axisflying-thor.md b/docs/quick-start/receivers/axisflying-thor.md index 6b3ee37b7..3906a4a7a 100644 --- a/docs/quick-start/receivers/axisflying-thor.md +++ b/docs/quick-start/receivers/axisflying-thor.md @@ -96,7 +96,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via UART" @@ -167,7 +167,7 @@ Some of the following procedures will not go through, particularly the via Passt 11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via WiFi" @@ -242,7 +242,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -272,7 +272,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -319,7 +319,7 @@ Some of the following procedures will not go through, particularly the via Passt 14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Manual Upload via Local WiFi" @@ -386,7 +386,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -416,7 +416,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -464,7 +464,7 @@ Some of the following procedures will not go through, particularly the via Passt 13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Auto Upload" @@ -492,7 +492,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -522,7 +522,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -570,7 +570,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
[Lua Running]: ../../assets/images/lua/config-bw.png diff --git a/docs/quick-start/receivers/betafpv-superd.md b/docs/quick-start/receivers/betafpv-superd.md index 3877060a2..42d79135e 100644 --- a/docs/quick-start/receivers/betafpv-superd.md +++ b/docs/quick-start/receivers/betafpv-superd.md @@ -85,7 +85,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via UART" @@ -156,7 +156,7 @@ Some of the following procedures will not go through, particularly the via Passt 11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via WiFi" @@ -231,7 +231,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -261,7 +261,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -308,7 +308,7 @@ Some of the following procedures will not go through, particularly the via Passt 14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Manual Upload via Local WiFi" @@ -375,7 +375,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -405,7 +405,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -453,7 +453,7 @@ Some of the following procedures will not go through, particularly the via Passt 13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Auto Upload" @@ -481,7 +481,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -511,7 +511,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -559,7 +559,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
[Lua Running]: ../../assets/images/lua/config-bw.png diff --git a/docs/quick-start/receivers/betafpv-superd900.md b/docs/quick-start/receivers/betafpv-superd900.md index acef1c0c1..e91eed7e9 100644 --- a/docs/quick-start/receivers/betafpv-superd900.md +++ b/docs/quick-start/receivers/betafpv-superd900.md @@ -85,7 +85,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via UART" @@ -156,7 +156,7 @@ Some of the following procedures will not go through, particularly the via Passt 11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via WiFi" @@ -231,7 +231,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -261,7 +261,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -308,7 +308,7 @@ Some of the following procedures will not go through, particularly the via Passt 14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Manual Upload via Local WiFi" @@ -375,7 +375,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -405,7 +405,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -453,7 +453,7 @@ Some of the following procedures will not go through, particularly the via Passt 13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Auto Upload" @@ -481,7 +481,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -511,7 +511,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -559,7 +559,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
[Lua Running]: ../../assets/images/lua/config-bw.png diff --git a/docs/quick-start/receivers/betafpv2400.md b/docs/quick-start/receivers/betafpv2400.md index 90450b8b7..c80f022e8 100644 --- a/docs/quick-start/receivers/betafpv2400.md +++ b/docs/quick-start/receivers/betafpv2400.md @@ -103,7 +103,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via UART" @@ -175,7 +175,7 @@ Some of the following procedures will not go through, particularly the via Passt 11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via WiFi" @@ -252,7 +252,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -282,7 +282,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -329,7 +329,7 @@ Some of the following procedures will not go through, particularly the via Passt 14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Manual Upload via Local WiFi" @@ -398,7 +398,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -428,7 +428,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -476,7 +476,7 @@ Some of the following procedures will not go through, particularly the via Passt 13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Auto Upload" @@ -504,7 +504,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -534,7 +534,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -584,7 +584,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
[Lua Running]: ../../assets/images/lua/config-bw.png diff --git a/docs/quick-start/receivers/betafpv900.md b/docs/quick-start/receivers/betafpv900.md index 862e57f66..66dabcfa6 100644 --- a/docs/quick-start/receivers/betafpv900.md +++ b/docs/quick-start/receivers/betafpv900.md @@ -96,7 +96,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via UART" @@ -167,7 +167,7 @@ Some of the following procedures will not go through, particularly the via Passt 11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via WiFi" @@ -242,7 +242,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -272,7 +272,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -319,7 +319,7 @@ Some of the following procedures will not go through, particularly the via Passt 14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Manual Upload via Local WiFi" @@ -386,7 +386,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -416,7 +416,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -464,7 +464,7 @@ Some of the following procedures will not go through, particularly the via Passt 13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Auto Upload" @@ -492,7 +492,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -522,7 +522,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -570,7 +570,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
[Lua Running]: ../../assets/images/lua/config-bw.png diff --git a/docs/quick-start/receivers/firmware-version.md b/docs/quick-start/receivers/firmware-version.md index 75f963ce9..79feb3aee 100644 --- a/docs/quick-start/receivers/firmware-version.md +++ b/docs/quick-start/receivers/firmware-version.md @@ -33,7 +33,7 @@ It is still recommended that you update your gear to the latest firmware version - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -63,7 +63,7 @@ It is still recommended that you update your gear to the latest firmware version 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
2. Scan for the `ExpressLRS RX` Access Point. diff --git a/docs/quick-start/receivers/flash2400.md b/docs/quick-start/receivers/flash2400.md index 043734b5a..8c0d04539 100644 --- a/docs/quick-start/receivers/flash2400.md +++ b/docs/quick-start/receivers/flash2400.md @@ -124,7 +124,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
@@ -197,7 +197,7 @@ Some of the following procedures will not go through, particularly the via Passt 11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via WiFi" @@ -273,7 +273,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -303,7 +303,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -350,7 +350,7 @@ Some of the following procedures will not go through, particularly the via Passt 14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Manual Upload via Local WiFi" @@ -418,7 +418,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -448,7 +448,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -496,7 +496,7 @@ Some of the following procedures will not go through, particularly the via Passt 13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Auto Upload" @@ -524,7 +524,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -554,7 +554,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -603,7 +603,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
## Updating your Receiver Firmware (STM-based) @@ -663,7 +663,7 @@ Some of the following procedures will not go through, particularly the via Passt 9. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via STLink" @@ -712,7 +712,7 @@ Some of the following procedures will not go through, particularly the via Passt 9. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
10. Rewire your receiver to your Flight Controller. diff --git a/docs/quick-start/receivers/foxeer2400.md b/docs/quick-start/receivers/foxeer2400.md index b2ed643ce..bdfe882c0 100644 --- a/docs/quick-start/receivers/foxeer2400.md +++ b/docs/quick-start/receivers/foxeer2400.md @@ -97,7 +97,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via UART" @@ -169,7 +169,7 @@ Some of the following procedures will not go through, particularly the via Passt 11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via WiFi" @@ -245,7 +245,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -275,7 +275,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -322,7 +322,7 @@ Some of the following procedures will not go through, particularly the via Passt 14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Manual Upload via Local WiFi" @@ -390,7 +390,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -420,7 +420,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -468,7 +468,7 @@ Some of the following procedures will not go through, particularly the via Passt 13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Auto Upload" @@ -496,7 +496,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -526,7 +526,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -575,7 +575,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
[Lua Running]: ../../assets/images/lua/config-bw.png diff --git a/docs/quick-start/receivers/geprc2400.md b/docs/quick-start/receivers/geprc2400.md index fbea914af..fb677d4f0 100644 --- a/docs/quick-start/receivers/geprc2400.md +++ b/docs/quick-start/receivers/geprc2400.md @@ -101,7 +101,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via UART" @@ -172,7 +172,7 @@ Some of the following procedures will not go through, particularly the via Passt 11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via WiFi" @@ -247,7 +247,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -277,7 +277,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -324,7 +324,7 @@ Some of the following procedures will not go through, particularly the via Passt 14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Manual Upload via Local WiFi" @@ -391,7 +391,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -421,7 +421,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -469,7 +469,7 @@ Some of the following procedures will not go through, particularly the via Passt 13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Auto Upload" @@ -497,7 +497,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -527,7 +527,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -575,7 +575,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
[Lua Running]: ../../assets/images/lua/config-bw.png diff --git a/docs/quick-start/receivers/geprc900.md b/docs/quick-start/receivers/geprc900.md index 4757ad9f3..252199fbb 100644 --- a/docs/quick-start/receivers/geprc900.md +++ b/docs/quick-start/receivers/geprc900.md @@ -96,7 +96,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via UART" @@ -167,7 +167,7 @@ Some of the following procedures will not go through, particularly the via Passt 11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via WiFi" @@ -242,7 +242,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -272,7 +272,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -319,7 +319,7 @@ Some of the following procedures will not go through, particularly the via Passt 14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Manual Upload via Local WiFi" @@ -386,7 +386,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -416,7 +416,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -464,7 +464,7 @@ Some of the following procedures will not go through, particularly the via Passt 13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Auto Upload" @@ -492,7 +492,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -522,7 +522,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -570,7 +570,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
[Lua Running]: ../../assets/images/lua/config-bw.png diff --git a/docs/quick-start/receivers/ghost2400.md b/docs/quick-start/receivers/ghost2400.md index 27f300942..5fb9b914d 100644 --- a/docs/quick-start/receivers/ghost2400.md +++ b/docs/quick-start/receivers/ghost2400.md @@ -60,7 +60,7 @@ template: main.html 9. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
10. Rewire your receiver to your Flight Controller. diff --git a/docs/quick-start/receivers/hglrc-hermes2400.md b/docs/quick-start/receivers/hglrc-hermes2400.md index 1a2b32d42..5cd960c01 100644 --- a/docs/quick-start/receivers/hglrc-hermes2400.md +++ b/docs/quick-start/receivers/hglrc-hermes2400.md @@ -96,7 +96,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via UART" @@ -167,7 +167,7 @@ Some of the following procedures will not go through, particularly the via Passt 11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via WiFi" @@ -242,7 +242,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -272,7 +272,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -319,7 +319,7 @@ Some of the following procedures will not go through, particularly the via Passt 14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Manual Upload via Local WiFi" @@ -386,7 +386,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -416,7 +416,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -464,7 +464,7 @@ Some of the following procedures will not go through, particularly the via Passt 13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Auto Upload" @@ -492,7 +492,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -522,7 +522,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -570,7 +570,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
[Lua Running]: ../../assets/images/lua/config-bw.png diff --git a/docs/quick-start/receivers/hglrc-hermes900.md b/docs/quick-start/receivers/hglrc-hermes900.md index a910ccc16..5c755fca6 100644 --- a/docs/quick-start/receivers/hglrc-hermes900.md +++ b/docs/quick-start/receivers/hglrc-hermes900.md @@ -96,7 +96,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via UART" @@ -167,7 +167,7 @@ Some of the following procedures will not go through, particularly the via Passt 11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via WiFi" @@ -242,7 +242,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -272,7 +272,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -319,7 +319,7 @@ Some of the following procedures will not go through, particularly the via Passt 14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Manual Upload via Local WiFi" @@ -386,7 +386,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -416,7 +416,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -464,7 +464,7 @@ Some of the following procedures will not go through, particularly the via Passt 13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Auto Upload" @@ -492,7 +492,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -522,7 +522,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -570,7 +570,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
[Lua Running]: ../../assets/images/lua/config-bw.png diff --git a/docs/quick-start/receivers/hmep2400.md b/docs/quick-start/receivers/hmep2400.md index d516871f6..4ecb106e7 100644 --- a/docs/quick-start/receivers/hmep2400.md +++ b/docs/quick-start/receivers/hmep2400.md @@ -96,7 +96,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via UART" @@ -168,7 +168,7 @@ Some of the following procedures will not go through, particularly the via Passt 11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via WiFi" @@ -247,7 +247,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -277,7 +277,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -324,7 +324,7 @@ Some of the following procedures will not go through, particularly the via Passt 14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Manual Upload via Local WiFi" @@ -395,7 +395,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -425,7 +425,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -473,7 +473,7 @@ Some of the following procedures will not go through, particularly the via Passt 13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Auto Upload" @@ -501,7 +501,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -531,7 +531,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -580,7 +580,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
[Lua Running]: ../../assets/images/lua/config-bw.png diff --git a/docs/quick-start/receivers/hmes900.md b/docs/quick-start/receivers/hmes900.md index bd6173571..792718929 100644 --- a/docs/quick-start/receivers/hmes900.md +++ b/docs/quick-start/receivers/hmes900.md @@ -97,7 +97,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
@@ -170,7 +170,7 @@ Some of the following procedures will not go through, particularly the via Passt 11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via WiFi" @@ -249,7 +249,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -279,7 +279,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -326,7 +326,7 @@ Some of the following procedures will not go through, particularly the via Passt 14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Manual Upload via Local WiFi" @@ -397,7 +397,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -427,7 +427,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -475,7 +475,7 @@ Some of the following procedures will not go through, particularly the via Passt 13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Auto Upload" @@ -503,7 +503,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -533,7 +533,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -582,7 +582,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
## Updating your Receiver Firmware (ES915RX/ES868RX) @@ -642,7 +642,7 @@ Some of the following procedures will not go through, particularly the via Passt 9. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via STLink" @@ -691,7 +691,7 @@ Some of the following procedures will not go through, particularly the via Passt 9. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
10. Rewire your receiver to your Flight Controller. diff --git a/docs/quick-start/receivers/hmpp2400.md b/docs/quick-start/receivers/hmpp2400.md index 166c4b973..6038621ea 100644 --- a/docs/quick-start/receivers/hmpp2400.md +++ b/docs/quick-start/receivers/hmpp2400.md @@ -83,7 +83,7 @@ The next steps will not be able to proceed smoothly and you'll have issues later 9. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via STLink" @@ -136,7 +136,7 @@ The next steps will not be able to proceed smoothly and you'll have issues later 9. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
10. Rewire your receiver to your Flight Controller following the [Receiver Wiring] guide. diff --git a/docs/quick-start/receivers/iflight2400.md b/docs/quick-start/receivers/iflight2400.md index 47bb452f3..6958e9e7a 100644 --- a/docs/quick-start/receivers/iflight2400.md +++ b/docs/quick-start/receivers/iflight2400.md @@ -101,7 +101,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via UART" @@ -172,7 +172,7 @@ Some of the following procedures will not go through, particularly the via Passt 11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via WiFi" @@ -247,7 +247,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -277,7 +277,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -324,7 +324,7 @@ Some of the following procedures will not go through, particularly the via Passt 14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Manual Upload via Local WiFi" @@ -391,7 +391,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -421,7 +421,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -469,7 +469,7 @@ Some of the following procedures will not go through, particularly the via Passt 13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Auto Upload" @@ -497,7 +497,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -527,7 +527,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -575,7 +575,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
[Lua Running]: ../../assets/images/lua/config-bw.png diff --git a/docs/quick-start/receivers/iflight900.md b/docs/quick-start/receivers/iflight900.md index 698da9599..573977acb 100644 --- a/docs/quick-start/receivers/iflight900.md +++ b/docs/quick-start/receivers/iflight900.md @@ -96,7 +96,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via UART" @@ -167,7 +167,7 @@ Some of the following procedures will not go through, particularly the via Passt 11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via WiFi" @@ -242,7 +242,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -272,7 +272,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -319,7 +319,7 @@ Some of the following procedures will not go through, particularly the via Passt 14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Manual Upload via Local WiFi" @@ -386,7 +386,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -416,7 +416,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -464,7 +464,7 @@ Some of the following procedures will not go through, particularly the via Passt 13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Auto Upload" @@ -492,7 +492,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -522,7 +522,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -570,7 +570,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
[Lua Running]: ../../assets/images/lua/config-bw.png diff --git a/docs/quick-start/receivers/jumper-aion.md b/docs/quick-start/receivers/jumper-aion.md index c82030cbd..c8966aec5 100644 --- a/docs/quick-start/receivers/jumper-aion.md +++ b/docs/quick-start/receivers/jumper-aion.md @@ -101,7 +101,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via UART" @@ -173,7 +173,7 @@ Some of the following procedures will not go through, particularly the via Passt 11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via WiFi" @@ -249,7 +249,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -279,7 +279,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -326,7 +326,7 @@ Some of the following procedures will not go through, particularly the via Passt 14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Manual Upload via Local WiFi" @@ -394,7 +394,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -424,7 +424,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -472,7 +472,7 @@ Some of the following procedures will not go through, particularly the via Passt 13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Auto Upload" @@ -500,7 +500,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -530,7 +530,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -579,7 +579,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
[Lua Running]: ../../assets/images/lua/config-bw.png diff --git a/docs/quick-start/receivers/jumper900.md b/docs/quick-start/receivers/jumper900.md index 4127adf00..43d41d83d 100644 --- a/docs/quick-start/receivers/jumper900.md +++ b/docs/quick-start/receivers/jumper900.md @@ -70,7 +70,7 @@ template: main.html 10. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
11. Rewire your receiver to your Flight Controller. Connect RX2 and TX2 (you will need to solder on the STM32 pins; see step 2 above) to a flight controller. Configure your flight controller per the [FC Configuration Guide]. @@ -135,7 +135,7 @@ template: main.html 9. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
[Configurator Release]: ../../assets/images/ConfiguratorRelease.png diff --git a/docs/quick-start/receivers/matek2400.md b/docs/quick-start/receivers/matek2400.md index 5edb5773f..4047f33ee 100644 --- a/docs/quick-start/receivers/matek2400.md +++ b/docs/quick-start/receivers/matek2400.md @@ -102,7 +102,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via UART" @@ -174,7 +174,7 @@ Some of the following procedures will not go through, particularly the via Passt 11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via WiFi" @@ -250,7 +250,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -280,7 +280,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -327,7 +327,7 @@ Some of the following procedures will not go through, particularly the via Passt 14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Manual Upload via Local WiFi" @@ -395,7 +395,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -425,7 +425,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -473,7 +473,7 @@ Some of the following procedures will not go through, particularly the via Passt 13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Auto Upload" @@ -501,7 +501,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -531,7 +531,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -580,7 +580,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
[Lua Running]: ../../assets/images/lua/config-bw.png diff --git a/docs/quick-start/receivers/r9.md b/docs/quick-start/receivers/r9.md index fc48f156f..9d17a6c94 100644 --- a/docs/quick-start/receivers/r9.md +++ b/docs/quick-start/receivers/r9.md @@ -130,7 +130,7 @@ The next steps will not be able to proceed properly and you'll have issues later 9. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via STLink" @@ -198,7 +198,7 @@ The next steps will not be able to proceed properly and you'll have issues later 9. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
10. Rewire your receiver to your Flight Controller. diff --git a/docs/quick-start/receivers/radiomaster-rp-2400.md b/docs/quick-start/receivers/radiomaster-rp-2400.md index 8f9b20002..521eacc6d 100644 --- a/docs/quick-start/receivers/radiomaster-rp-2400.md +++ b/docs/quick-start/receivers/radiomaster-rp-2400.md @@ -108,7 +108,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via UART" @@ -181,7 +181,7 @@ Some of the following procedures will not go through, particularly the via Passt 11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via WiFi" @@ -258,7 +258,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -288,7 +288,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -335,7 +335,7 @@ Some of the following procedures will not go through, particularly the via Passt 14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Manual Upload via Local WiFi" @@ -404,7 +404,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -434,7 +434,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -482,7 +482,7 @@ Some of the following procedures will not go through, particularly the via Passt 13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Auto Upload" @@ -510,7 +510,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -540,7 +540,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -590,7 +590,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
[Lua Running]: ../../assets/images/lua/config-bw.png diff --git a/docs/quick-start/receivers/siyiFRmini.md b/docs/quick-start/receivers/siyiFRmini.md index 52629227f..70452686b 100644 --- a/docs/quick-start/receivers/siyiFRmini.md +++ b/docs/quick-start/receivers/siyiFRmini.md @@ -70,7 +70,7 @@ template: main.html 9. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
10. Rewire your receiver to your Flight Controller. diff --git a/docs/quick-start/receivers/updating.md b/docs/quick-start/receivers/updating.md index f18921b74..6223b3e22 100644 --- a/docs/quick-start/receivers/updating.md +++ b/docs/quick-start/receivers/updating.md @@ -54,7 +54,7 @@ description: General Guidelines for ExpressLRS Receiver firmware updating. 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via UART" @@ -119,7 +119,7 @@ description: General Guidelines for ExpressLRS Receiver firmware updating. 11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via WiFi" @@ -187,7 +187,7 @@ description: General Guidelines for ExpressLRS Receiver firmware updating. - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -217,7 +217,7 @@ description: General Guidelines for ExpressLRS Receiver firmware updating. 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -264,7 +264,7 @@ description: General Guidelines for ExpressLRS Receiver firmware updating. 14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Manual Upload via Local WiFi" @@ -324,7 +324,7 @@ description: General Guidelines for ExpressLRS Receiver firmware updating. - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -354,7 +354,7 @@ description: General Guidelines for ExpressLRS Receiver firmware updating. 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -402,7 +402,7 @@ description: General Guidelines for ExpressLRS Receiver firmware updating. 13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Auto Upload" @@ -430,7 +430,7 @@ description: General Guidelines for ExpressLRS Receiver firmware updating. - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -460,7 +460,7 @@ description: General Guidelines for ExpressLRS Receiver firmware updating. 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -502,7 +502,7 @@ description: General Guidelines for ExpressLRS Receiver firmware updating. 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
[Lua Running]: ../../assets/images/lua/config-bw.png diff --git a/docs/quick-start/receivers/vantac2400.md b/docs/quick-start/receivers/vantac2400.md index afc9ed21f..0e4001e36 100644 --- a/docs/quick-start/receivers/vantac2400.md +++ b/docs/quick-start/receivers/vantac2400.md @@ -96,7 +96,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via UART" @@ -167,7 +167,7 @@ Some of the following procedures will not go through, particularly the via Passt 11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via WiFi" @@ -242,7 +242,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -272,7 +272,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -319,7 +319,7 @@ Some of the following procedures will not go through, particularly the via Passt 14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Manual Upload via Local WiFi" @@ -386,7 +386,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -416,7 +416,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -464,7 +464,7 @@ Some of the following procedures will not go through, particularly the via Passt 13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Auto Upload" @@ -492,7 +492,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -522,7 +522,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -570,7 +570,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
[Lua Running]: ../../assets/images/lua/config-bw.png diff --git a/docs/quick-start/receivers/voyager900.md b/docs/quick-start/receivers/voyager900.md index 1a802062e..1a00b2c8c 100644 --- a/docs/quick-start/receivers/voyager900.md +++ b/docs/quick-start/receivers/voyager900.md @@ -96,7 +96,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
@@ -168,7 +168,7 @@ Some of the following procedures will not go through, particularly the via Passt 11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via WiFi" @@ -243,7 +243,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -273,7 +273,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -320,7 +320,7 @@ Some of the following procedures will not go through, particularly the via Passt 14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Manual Upload via Local WiFi" @@ -387,7 +387,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -417,7 +417,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -465,7 +465,7 @@ Some of the following procedures will not go through, particularly the via Passt 13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "Auto Upload" @@ -493,7 +493,7 @@ Some of the following procedures will not go through, particularly the via Passt - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
=== "using the ExpressLRS Lua Script" @@ -523,7 +523,7 @@ Some of the following procedures will not go through, particularly the via Passt 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)" @@ -571,7 +571,7 @@ Some of the following procedures will not go through, particularly the via Passt 8. The LED on the Receiver should return to Slow Blinking LED after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
## Updating your Receiver Firmware (STM-based) @@ -631,7 +631,7 @@ Some of the following procedures will not go through, particularly the via Passt 9. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
=== "via STLink" @@ -680,7 +680,7 @@ Some of the following procedures will not go through, particularly the via Passt 9. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
10. Rewire your receiver to your Flight Controller. diff --git a/docs/quick-start/receivers/wiring-up.md b/docs/quick-start/receivers/wiring-up.md index 32584bb81..e2e5586ad 100644 --- a/docs/quick-start/receivers/wiring-up.md +++ b/docs/quick-start/receivers/wiring-up.md @@ -57,10 +57,10 @@ Observe the Receiver LED. It should have one of these behaviors: || LED Indication | Status | |---|---|---| -|![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif)| Slow blink 500ms on/off | Waiting for connection from transmitter | -|![LEDSEQ_BINDING](https://cdn.discordapp.com/attachments/738450139693449258/921065812763218010/LEDSEQ_BINDING_10_10_10_100.gif)| Double blink then pause | Binding mode is active | -|![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif)| Fast blinking 25ms on/off | WiFi mode has started. Starts after 60s. | -|![CONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812507373568/LED_ON.gif)| Solid on | Bootloader mode is active | +|![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)| Slow blink 500ms on/off | Waiting for connection from transmitter | +|![LEDSEQ_BINDING](../../assets/images/receiverLED/LEDSEQ_BINDING_10_10_10_100.gif)| Double blink then pause | Binding mode is active | +|![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)| Fast blinking 25ms on/off | WiFi mode has started. Starts after 60s. | +|![CONNECTED](../../assets/images/receiverLED/LED_ON.gif)| Solid on | Bootloader mode is active | If the Receiver uses an RGB LED(e.g. Foxeer LNA, BetaFPV SuperD, Happymodel EP Dual), the following can be observed: diff --git a/docs/quick-start/unbricking.md b/docs/quick-start/unbricking.md index eb2121f02..b24648a2e 100644 --- a/docs/quick-start/unbricking.md +++ b/docs/quick-start/unbricking.md @@ -77,7 +77,7 @@ Follow the steps below very closely to recover your "bricked" Receiver. 10. Plug in LiPo or twist the 5v Wires together to power up the receiver (see Step 1). The receiver LED should be Solid.
- ![BOOTLOADER](https://cdn.discordapp.com/attachments/738450139693449258/921065812507373568/LED_ON.gif) + ![BOOTLOADER](../assets/images/receiverLED/LED_ON.gif)
11. Wait for the process to finish, hopefully with the Success Message. Otherwise, repeat the procedure above or try a different approach (like reflashing via FTDI/UART Adapter). @@ -89,7 +89,7 @@ Follow the steps below very closely to recover your "bricked" Receiver. 14. Repower up the receiver to verify it is back in its normal working state.
- ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![LEDSEQ_DISCONNECTED](../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
### Wall of Text? Here's a vid! diff --git a/docs/quick-start/webui.md b/docs/quick-start/webui.md index c2d93abaa..9c1444479 100644 --- a/docs/quick-start/webui.md +++ b/docs/quick-start/webui.md @@ -120,7 +120,7 @@ This section is currently only available for the RadioMaster Ranger module. 2. Power-cycle your receiver (turn it Off then turn it back On). The Receiver LED should be blinking slowly as shown below.
- ![RX Waiting](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif) + ![RX Waiting](../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
??? warning "Receiver LED not Blinking! (click/tap to expand)" @@ -129,7 +129,7 @@ This section is currently only available for the RadioMaster Ranger module. 3. Wait for about 60 seconds or until the Receiver LED blinks rapidly indicating it is now in WiFi Mode.
- ![RX WiFi](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![RX WiFi](../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
@@ -137,7 +137,7 @@ This section is currently only available for the RadioMaster Ranger module. 1. Make sure the Receiver and TX Module are in sync and bound. RSSI indicators on your Radio Home screen should be visible and the Receiver LED should be Solid as shown.
- ![RX Bound](https://cdn.discordapp.com/attachments/738450139693449258/921065812507373568/LED_ON.gif) + ![RX Bound](../assets/images/receiverLED/LED_ON.gif)
2. Press the ++"SYS"++ Key on your Radio. @@ -168,7 +168,7 @@ This section is currently only available for the RadioMaster Ranger module. 7. The `WiFi Running` screen will briefly show up. Your Receiver is now in WiFi mode as indicated by the rapidly blinking LED.
- ![RX WiFi](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif) + ![RX WiFi](../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
!!! info "Note" diff --git a/docs/software/loan-model.md b/docs/software/loan-model.md index 63c993ec8..a89be1f36 100644 --- a/docs/software/loan-model.md +++ b/docs/software/loan-model.md @@ -39,7 +39,7 @@ description: Lend your ExpressLRS models to your friends without having to refla * The receiver LED should go into the bind flashing state
-![LEDSEQ_BINDING](https://cdn.discordapp.com/attachments/738450139693449258/921065812763218010/LEDSEQ_BINDING_10_10_10_100.gif) +![LEDSEQ_BINDING](../assets/images/receiverLED/LEDSEQ_BINDING_10_10_10_100.gif)
### On the borrowers handset @@ -47,7 +47,7 @@ description: Lend your ExpressLRS models to your friends without having to refla * The receiver LED should turn solid on, and the handset should connect to the receiver
-![CONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812507373568/LED_ON.gif) +![CONNECTED](../assets/images/receiverLED/LED_ON.gif)
## Returning a "Loaned" Model