diff --git a/docs/assets/images/Capture.png b/docs/assets/images/Capture.png
new file mode 100644
index 000000000..ee8cca7e9
Binary files /dev/null and b/docs/assets/images/Capture.png differ
diff --git a/docs/assets/images/IMG_0380_1.jpg b/docs/assets/images/IMG_0380_1.jpg
new file mode 100644
index 000000000..d4b936e9c
Binary files /dev/null and b/docs/assets/images/IMG_0380_1.jpg differ
diff --git a/docs/assets/images/IMG_0456.jpg b/docs/assets/images/IMG_0456.jpg
new file mode 100644
index 000000000..3ac0209ce
Binary files /dev/null and b/docs/assets/images/IMG_0456.jpg differ
diff --git a/docs/assets/images/IMG_0665.jpg b/docs/assets/images/IMG_0665.jpg
new file mode 100644
index 000000000..f14437cf3
Binary files /dev/null and b/docs/assets/images/IMG_0665.jpg differ
diff --git a/docs/assets/images/IMG_0665.png b/docs/assets/images/IMG_0665.png
new file mode 100644
index 000000000..0805a4199
Binary files /dev/null and b/docs/assets/images/IMG_0665.png differ
diff --git a/docs/assets/images/IMG_9220.png b/docs/assets/images/IMG_9220.png
new file mode 100644
index 000000000..24e4e0f4d
Binary files /dev/null and b/docs/assets/images/IMG_9220.png differ
diff --git a/docs/assets/images/IMG_9221.png b/docs/assets/images/IMG_9221.png
new file mode 100644
index 000000000..462f09cfb
Binary files /dev/null and b/docs/assets/images/IMG_9221.png differ
diff --git a/docs/assets/images/LEDSEQ_BINDING_10_10_10_100.gif b/docs/assets/images/LEDSEQ_BINDING_10_10_10_100.gif
new file mode 100644
index 000000000..e5dd1523e
Binary files /dev/null and b/docs/assets/images/LEDSEQ_BINDING_10_10_10_100.gif differ
diff --git a/docs/assets/images/LEDSEQ_DISCONNECTED_50_50.gif b/docs/assets/images/LEDSEQ_DISCONNECTED_50_50.gif
new file mode 100644
index 000000000..251fcd692
Binary files /dev/null and b/docs/assets/images/LEDSEQ_DISCONNECTED_50_50.gif differ
diff --git a/docs/assets/images/LEDSEQ_MODEL_MISMATCH_10_10_10_10_10_100.gif b/docs/assets/images/LEDSEQ_MODEL_MISMATCH_10_10_10_10_10_100.gif
new file mode 100644
index 000000000..5594ad21f
Binary files /dev/null and b/docs/assets/images/LEDSEQ_MODEL_MISMATCH_10_10_10_10_10_100.gif differ
diff --git a/docs/assets/images/LEDSEQ_RADIO_FAILED_20_100.gif b/docs/assets/images/LEDSEQ_RADIO_FAILED_20_100.gif
new file mode 100644
index 000000000..e6276e642
Binary files /dev/null and b/docs/assets/images/LEDSEQ_RADIO_FAILED_20_100.gif differ
diff --git a/docs/assets/images/LEDSEQ_WIFI_UPDATE_2_3.gif b/docs/assets/images/LEDSEQ_WIFI_UPDATE_2_3.gif
new file mode 100644
index 000000000..307b7241d
Binary files /dev/null and b/docs/assets/images/LEDSEQ_WIFI_UPDATE_2_3.gif differ
diff --git a/docs/assets/images/LED_ON.gif b/docs/assets/images/LED_ON.gif
new file mode 100644
index 000000000..0e13eb8cb
Binary files /dev/null and b/docs/assets/images/LED_ON.gif differ
diff --git a/docs/assets/images/OSD_RFMD.png b/docs/assets/images/OSD_RFMD.png
new file mode 100644
index 000000000..80e677b49
Binary files /dev/null and b/docs/assets/images/OSD_RFMD.png differ
diff --git a/docs/assets/images/SimoneFrascarelli.jpg b/docs/assets/images/SimoneFrascarelli.jpg
new file mode 100644
index 000000000..2aaeed895
Binary files /dev/null and b/docs/assets/images/SimoneFrascarelli.jpg differ
diff --git a/docs/assets/images/diytx0.jpg b/docs/assets/images/diytx0.jpg
new file mode 100644
index 000000000..0faf8c97c
Binary files /dev/null and b/docs/assets/images/diytx0.jpg differ
diff --git a/docs/assets/images/diytx1.jpg b/docs/assets/images/diytx1.jpg
new file mode 100644
index 000000000..c493d610b
Binary files /dev/null and b/docs/assets/images/diytx1.jpg differ
diff --git a/docs/assets/images/frmini-rx-as-tx-wiring.jpg b/docs/assets/images/frmini-rx-as-tx-wiring.jpg
new file mode 100644
index 000000000..2e9364e4c
Binary files /dev/null and b/docs/assets/images/frmini-rx-as-tx-wiring.jpg differ
diff --git a/docs/assets/images/gitclone.png b/docs/assets/images/gitclone.png
new file mode 100644
index 000000000..45b3cba27
Binary files /dev/null and b/docs/assets/images/gitclone.png differ
diff --git a/docs/assets/images/missingfilter.png b/docs/assets/images/missingfilter.png
new file mode 100644
index 000000000..542e5894a
Binary files /dev/null and b/docs/assets/images/missingfilter.png differ
diff --git a/docs/assets/images/modelmatchwebui.png b/docs/assets/images/modelmatchwebui.png
new file mode 100644
index 000000000..88afd8ee1
Binary files /dev/null and b/docs/assets/images/modelmatchwebui.png differ
diff --git a/docs/assets/images/pio.jpg b/docs/assets/images/pio.jpg
new file mode 100644
index 000000000..79137f259
Binary files /dev/null and b/docs/assets/images/pio.jpg differ
diff --git a/docs/assets/images/selector.png b/docs/assets/images/selector.png
new file mode 100644
index 000000000..2ec88c126
Binary files /dev/null and b/docs/assets/images/selector.png differ
diff --git a/docs/assets/images/src.png b/docs/assets/images/src.png
new file mode 100644
index 000000000..e610a8ba6
Binary files /dev/null and b/docs/assets/images/src.png differ
diff --git a/docs/assets/images/stlink.jpg b/docs/assets/images/stlink.jpg
new file mode 100644
index 000000000..7455d35fe
Binary files /dev/null and b/docs/assets/images/stlink.jpg differ
diff --git a/docs/assets/images/stm32cubesteps.png b/docs/assets/images/stm32cubesteps.png
new file mode 100644
index 000000000..4921b9393
Binary files /dev/null and b/docs/assets/images/stm32cubesteps.png differ
diff --git a/docs/hardware/crystal-frequency-error.md b/docs/hardware/crystal-frequency-error.md
index c56d3115b..9876d6c94 100644
--- a/docs/hardware/crystal-frequency-error.md
+++ b/docs/hardware/crystal-frequency-error.md
@@ -121,7 +121,7 @@ Just to note, we've had some mismatching cases as follows:
-
+
Flywoo Caps
diff --git a/docs/hardware/smd-antenna.md b/docs/hardware/smd-antenna.md
index 85b8ee716..97a7fec2c 100644
--- a/docs/hardware/smd-antenna.md
+++ b/docs/hardware/smd-antenna.md
@@ -12,7 +12,7 @@ Have you ever wished you could build a quad without worrying about how to mount
If so, the SMD Antenna is for you!
-
+SMD Antenna
@@ -32,11 +32,11 @@ This perky little fellow is worse at receiving signals than his snaky brothers,
The antenna is sort of fragile and can break off or be melted by a stray soldering iron. If this happens, you can save your receiver by soldering a U.FL/IPEX1 connector onto the pads as shown here. Just make sure the center pin has continuity with the filter at the other end of the trace, and no continuity with the ground.
-
+
Conversely, the SMD antenna can be soldered to regular U.FL footprints if you're brave.
-
+
\ No newline at end of file
diff --git a/docs/hardware/special-targets/diy-tx.md b/docs/hardware/special-targets/diy-tx.md
index 3635d3868..ffbe8060d 100644
--- a/docs/hardware/special-targets/diy-tx.md
+++ b/docs/hardware/special-targets/diy-tx.md
@@ -17,7 +17,7 @@ Possibly one of the biggest benefits of using `ExpressLRS` is custom hardware!
All of the info on this topic can be found [here](https://github.com/ExpressLRS/ExpressLRS-Hardware/tree/master/PCB/2400MHz/TX_SX1280)
-
+
### Custom Super Slim ESP 2.4 GHz TX (for lite module bay)
@@ -25,7 +25,7 @@ All of the info on this topic can be found [here](https://github.com/ExpressLRS/
The super slim is an evolution of the slim. It uses the same base hardware as the JR size one. It's the same size as an R9M Lite, and fits in all handsets with a lite module bay such as the X-Lite, X9 Lite, and Tango 2 (with the proper adapter). The rest of the info can be found [here](https://github.com/ExpressLRS/ExpressLRS-Hardware/tree/master/PCB/2400MHz/TX_SX1280_Super_Slim)
-
+
### Custom 900 MHz TX (not built anymore)
diff --git a/docs/hardware/special-targets/nuclear-hardware.md b/docs/hardware/special-targets/nuclear-hardware.md
index e46571496..65e3c4bee 100644
--- a/docs/hardware/special-targets/nuclear-hardware.md
+++ b/docs/hardware/special-targets/nuclear-hardware.md
@@ -17,7 +17,7 @@ The Nuclear RX is designed to be as small as possible, using the same software t
- Up to 500Hz packet rate
-
+
When you get your Nuclear RX, it will likely be on the latest release firmware. You'll probably have to update it to work with your TX. To update, follow the steps in the [Wi-Fi updating](../../software/updating/wifi-updating.md) page. Alternatively, you can use [betaflight passthrough](../../software/updating/betaflight-passthrough.md) should work, but the boot jumper must be bridged while applying power to the RX.
@@ -34,7 +34,7 @@ When building, use one of the `DIY_2400_RX_ESP8285_SX1280_via_X` targets. To use
If for some reason the RX needs to be in boot mode, bridge the jumpers as shown here:
-
+
## Nuclear TX
diff --git a/docs/info/signal-health.md b/docs/info/signal-health.md
index f8dec4ad5..9114dee2c 100644
--- a/docs/info/signal-health.md
+++ b/docs/info/signal-health.md
@@ -49,9 +49,9 @@ In iNAV, the RSSI Value on the OSD is called RSSI (Signal Strength), and will al
## RF Mode Indexes (RFMD)
OSDs report the packet rate using an index instead of the actual rate, either as a `RATE:LQ%` or with rate in the hundreds digit such as `799` where 7 is the RATE and 99 is the LQ%. Handsets display the rate using the RFMD telemetry item.
-
+
-| RFMD | Lua | Packet Rate | Sensitivity Limit | TX duration (us) | TX Interval (us) |
+| RFMD | Lua | Packet Rate | Sensitivity Limit | TX Duration (us) | TX Interval (us) |
|:---:|:---:|:---:|---:|---:|---:|
| 14 | D50 | 50Hz | -112dBm | 4640.0 | 5000 |
| 13 | F1000 | 1000Hz | -104dBm | 388.8 | 1000 |
diff --git a/docs/quick-start/binding.md b/docs/quick-start/binding.md
index 605d2e731..0bc7e1003 100644
--- a/docs/quick-start/binding.md
+++ b/docs/quick-start/binding.md
@@ -64,7 +64,7 @@ For traditional binding to work, a Binding Phrase must not be set, at least for
The Receiver LED should also be blinking when powered up.
-
+
??? danger "Receiver LED doesn't Blink (click/tap to expand)"
@@ -103,7 +103,7 @@ The procedure is as follows:
3. Make sure the LED is doing a quick double-blink, which indicates the receiver is in bind mode.
- 
+ 
4. Power up your transmitter/radio and use the ++"[BIND]"++ button on the ExpressLRS Lua script, which sends out a binding pulse. The Popup will briefly show up and then disappear.
@@ -115,7 +115,7 @@ The procedure is as follows:
5. If the receiver LED turned into a solid light, it's bound!
- 
+ 
## Connection Check
@@ -154,7 +154,7 @@ Using the [ExpressLRS Lua Script](transmitters/lua-howto.md), look for a `C` in
This is also indicated by the Receiver LED as 3 fast blinks then a pause:
- 
+ 
If you've deliberately set up Model Matching following [this page](../software/model-config-match.md), make sure your settings are correct.
diff --git a/docs/quick-start/led-status.md b/docs/quick-start/led-status.md
index a358089b2..0d146186c 100644
--- a/docs/quick-start/led-status.md
+++ b/docs/quick-start/led-status.md
@@ -27,12 +27,12 @@ Receivers with a single color LED communicate their status as follows:
|| LED Indication | Status |
|---|---|---|
-|| Slow blink 500ms on/off | Waiting for connection from transmitter |
-|| Fast blinking 25ms on/off | WiFi mode enabled |
-|| Medium speed blink 100ms on/off | Radio chip not detected |
-|| Double blink then pause | Binding mode enabled |
-|| Triple blink then pause | Connected to transmitter but mismatched model-match configuration |
-|| Solid on | Connected to a transmitter, or bootloader mode enabled |
+|| Slow blink 500ms on/off | Waiting for connection from transmitter |
+|| Fast blinking 25ms on/off | WiFi mode enabled |
+|| Medium speed blink 100ms on/off | Radio chip not detected |
+|| Double blink then pause | Binding mode enabled |
+|| Triple blink then pause | Connected to transmitter but mismatched model-match configuration |
+|| Solid on | Connected to a transmitter, or bootloader mode enabled |
Receivers with RGB LED show status as indicated below:
diff --git a/docs/quick-start/pre-1stflight.md b/docs/quick-start/pre-1stflight.md
index 0ebc711e3..3b46b020e 100644
--- a/docs/quick-start/pre-1stflight.md
+++ b/docs/quick-start/pre-1stflight.md
@@ -80,7 +80,7 @@ On the 900MHz hardware, a value of -20dBm or thereabouts is a good indication yo
- Check if there aren't any missing components in your receivers, like the RF filter (can be found near the antenna or ufl). Also check if the SMD antenna is not broken or damaged and it's soldered in properly.
-
+
- Most DIY modules require moving the 0-ohm resistor on the E28 from the PCB antenna side towards the UFL side. A solder bridge will work just fine as well, but make sure it is on the correct pads.
diff --git a/docs/quick-start/receivers/axisflying-thor.md b/docs/quick-start/receivers/axisflying-thor.md
index 6b3ee37b7..feab149ef 100644
--- a/docs/quick-start/receivers/axisflying-thor.md
+++ b/docs/quick-start/receivers/axisflying-thor.md
@@ -96,7 +96,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via UART"
@@ -167,7 +167,7 @@ Some of the following procedures will not go through, particularly the via Passt
11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via WiFi"
@@ -242,7 +242,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -272,7 +272,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -319,7 +319,7 @@ Some of the following procedures will not go through, particularly the via Passt
14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Manual Upload via Local WiFi"
@@ -386,7 +386,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -416,7 +416,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -464,7 +464,7 @@ Some of the following procedures will not go through, particularly the via Passt
13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Auto Upload"
@@ -492,7 +492,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -522,7 +522,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -570,7 +570,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
[Lua Running]: ../../assets/images/lua/config-bw.png
diff --git a/docs/quick-start/receivers/betafpv-superd.md b/docs/quick-start/receivers/betafpv-superd.md
index 3877060a2..d5fae2404 100644
--- a/docs/quick-start/receivers/betafpv-superd.md
+++ b/docs/quick-start/receivers/betafpv-superd.md
@@ -85,7 +85,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via UART"
@@ -156,7 +156,7 @@ Some of the following procedures will not go through, particularly the via Passt
11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via WiFi"
@@ -231,7 +231,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -261,7 +261,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -308,7 +308,7 @@ Some of the following procedures will not go through, particularly the via Passt
14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Manual Upload via Local WiFi"
@@ -375,7 +375,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -405,7 +405,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -453,7 +453,7 @@ Some of the following procedures will not go through, particularly the via Passt
13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Auto Upload"
@@ -481,7 +481,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -511,7 +511,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -559,7 +559,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
[Lua Running]: ../../assets/images/lua/config-bw.png
diff --git a/docs/quick-start/receivers/betafpv-superd900.md b/docs/quick-start/receivers/betafpv-superd900.md
index acef1c0c1..d269215bb 100644
--- a/docs/quick-start/receivers/betafpv-superd900.md
+++ b/docs/quick-start/receivers/betafpv-superd900.md
@@ -85,7 +85,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via UART"
@@ -156,7 +156,7 @@ Some of the following procedures will not go through, particularly the via Passt
11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via WiFi"
@@ -231,7 +231,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -261,7 +261,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -308,7 +308,7 @@ Some of the following procedures will not go through, particularly the via Passt
14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Manual Upload via Local WiFi"
@@ -375,7 +375,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -405,7 +405,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -453,7 +453,7 @@ Some of the following procedures will not go through, particularly the via Passt
13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Auto Upload"
@@ -481,7 +481,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -511,7 +511,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -559,7 +559,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
[Lua Running]: ../../assets/images/lua/config-bw.png
diff --git a/docs/quick-start/receivers/betafpv2400.md b/docs/quick-start/receivers/betafpv2400.md
index 90450b8b7..01f88d6a8 100644
--- a/docs/quick-start/receivers/betafpv2400.md
+++ b/docs/quick-start/receivers/betafpv2400.md
@@ -103,7 +103,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via UART"
@@ -175,7 +175,7 @@ Some of the following procedures will not go through, particularly the via Passt
11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via WiFi"
@@ -252,7 +252,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -282,7 +282,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -329,7 +329,7 @@ Some of the following procedures will not go through, particularly the via Passt
14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Manual Upload via Local WiFi"
@@ -398,7 +398,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -428,7 +428,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -476,7 +476,7 @@ Some of the following procedures will not go through, particularly the via Passt
13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Auto Upload"
@@ -504,7 +504,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -534,7 +534,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -584,7 +584,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
[Lua Running]: ../../assets/images/lua/config-bw.png
diff --git a/docs/quick-start/receivers/betafpv900.md b/docs/quick-start/receivers/betafpv900.md
index 862e57f66..114483d9b 100644
--- a/docs/quick-start/receivers/betafpv900.md
+++ b/docs/quick-start/receivers/betafpv900.md
@@ -96,7 +96,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via UART"
@@ -167,7 +167,7 @@ Some of the following procedures will not go through, particularly the via Passt
11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via WiFi"
@@ -242,7 +242,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -272,7 +272,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -319,7 +319,7 @@ Some of the following procedures will not go through, particularly the via Passt
14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Manual Upload via Local WiFi"
@@ -386,7 +386,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -416,7 +416,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -464,7 +464,7 @@ Some of the following procedures will not go through, particularly the via Passt
13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Auto Upload"
@@ -492,7 +492,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -522,7 +522,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -570,7 +570,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
[Lua Running]: ../../assets/images/lua/config-bw.png
diff --git a/docs/quick-start/receivers/firmware-version.md b/docs/quick-start/receivers/firmware-version.md
index 75f963ce9..2d1b43d53 100644
--- a/docs/quick-start/receivers/firmware-version.md
+++ b/docs/quick-start/receivers/firmware-version.md
@@ -33,7 +33,7 @@ It is still recommended that you update your gear to the latest firmware version
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -63,7 +63,7 @@ It is still recommended that you update your gear to the latest firmware version
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
2. Scan for the `ExpressLRS RX` Access Point.
diff --git a/docs/quick-start/receivers/flash2400.md b/docs/quick-start/receivers/flash2400.md
index 043734b5a..7c2ed6485 100644
--- a/docs/quick-start/receivers/flash2400.md
+++ b/docs/quick-start/receivers/flash2400.md
@@ -124,7 +124,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
@@ -197,7 +197,7 @@ Some of the following procedures will not go through, particularly the via Passt
11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via WiFi"
@@ -273,7 +273,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -303,7 +303,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -350,7 +350,7 @@ Some of the following procedures will not go through, particularly the via Passt
14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Manual Upload via Local WiFi"
@@ -418,7 +418,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -448,7 +448,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -496,7 +496,7 @@ Some of the following procedures will not go through, particularly the via Passt
13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Auto Upload"
@@ -524,7 +524,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -554,7 +554,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -603,7 +603,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
## Updating your Receiver Firmware (STM-based)
@@ -663,7 +663,7 @@ Some of the following procedures will not go through, particularly the via Passt
9. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via STLink"
@@ -712,7 +712,7 @@ Some of the following procedures will not go through, particularly the via Passt
9. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
10. Rewire your receiver to your Flight Controller.
diff --git a/docs/quick-start/receivers/foxeer2400.md b/docs/quick-start/receivers/foxeer2400.md
index b2ed643ce..1251f3e3f 100644
--- a/docs/quick-start/receivers/foxeer2400.md
+++ b/docs/quick-start/receivers/foxeer2400.md
@@ -97,7 +97,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via UART"
@@ -169,7 +169,7 @@ Some of the following procedures will not go through, particularly the via Passt
11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via WiFi"
@@ -245,7 +245,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -275,7 +275,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -322,7 +322,7 @@ Some of the following procedures will not go through, particularly the via Passt
14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Manual Upload via Local WiFi"
@@ -390,7 +390,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -420,7 +420,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -468,7 +468,7 @@ Some of the following procedures will not go through, particularly the via Passt
13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Auto Upload"
@@ -496,7 +496,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -526,7 +526,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -575,7 +575,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
[Lua Running]: ../../assets/images/lua/config-bw.png
diff --git a/docs/quick-start/receivers/geprc2400.md b/docs/quick-start/receivers/geprc2400.md
index fbea914af..ccf4203ff 100644
--- a/docs/quick-start/receivers/geprc2400.md
+++ b/docs/quick-start/receivers/geprc2400.md
@@ -101,7 +101,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via UART"
@@ -172,7 +172,7 @@ Some of the following procedures will not go through, particularly the via Passt
11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via WiFi"
@@ -247,7 +247,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -277,7 +277,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -324,7 +324,7 @@ Some of the following procedures will not go through, particularly the via Passt
14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Manual Upload via Local WiFi"
@@ -391,7 +391,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -421,7 +421,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -469,7 +469,7 @@ Some of the following procedures will not go through, particularly the via Passt
13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Auto Upload"
@@ -497,7 +497,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -527,7 +527,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -575,7 +575,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
[Lua Running]: ../../assets/images/lua/config-bw.png
diff --git a/docs/quick-start/receivers/geprc900.md b/docs/quick-start/receivers/geprc900.md
index 4757ad9f3..46906cd03 100644
--- a/docs/quick-start/receivers/geprc900.md
+++ b/docs/quick-start/receivers/geprc900.md
@@ -96,7 +96,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via UART"
@@ -167,7 +167,7 @@ Some of the following procedures will not go through, particularly the via Passt
11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via WiFi"
@@ -242,7 +242,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -272,7 +272,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -319,7 +319,7 @@ Some of the following procedures will not go through, particularly the via Passt
14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Manual Upload via Local WiFi"
@@ -386,7 +386,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -416,7 +416,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -464,7 +464,7 @@ Some of the following procedures will not go through, particularly the via Passt
13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Auto Upload"
@@ -492,7 +492,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -522,7 +522,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -570,7 +570,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
[Lua Running]: ../../assets/images/lua/config-bw.png
diff --git a/docs/quick-start/receivers/ghost2400.md b/docs/quick-start/receivers/ghost2400.md
index 27f300942..882961032 100644
--- a/docs/quick-start/receivers/ghost2400.md
+++ b/docs/quick-start/receivers/ghost2400.md
@@ -60,7 +60,7 @@ template: main.html
9. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
10. Rewire your receiver to your Flight Controller.
@@ -123,7 +123,7 @@ template: main.html
9. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
[Configurator Release]: ../../assets/images/ConfiguratorRelease.png
diff --git a/docs/quick-start/receivers/hglrc-hermes2400.md b/docs/quick-start/receivers/hglrc-hermes2400.md
index 1a2b32d42..e13553dfd 100644
--- a/docs/quick-start/receivers/hglrc-hermes2400.md
+++ b/docs/quick-start/receivers/hglrc-hermes2400.md
@@ -96,7 +96,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via UART"
@@ -167,7 +167,7 @@ Some of the following procedures will not go through, particularly the via Passt
11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via WiFi"
@@ -242,7 +242,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -272,7 +272,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -319,7 +319,7 @@ Some of the following procedures will not go through, particularly the via Passt
14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Manual Upload via Local WiFi"
@@ -386,7 +386,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -416,7 +416,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -464,7 +464,7 @@ Some of the following procedures will not go through, particularly the via Passt
13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Auto Upload"
@@ -492,7 +492,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -522,7 +522,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -570,7 +570,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
[Lua Running]: ../../assets/images/lua/config-bw.png
diff --git a/docs/quick-start/receivers/hglrc-hermes900.md b/docs/quick-start/receivers/hglrc-hermes900.md
index a910ccc16..7da09b30e 100644
--- a/docs/quick-start/receivers/hglrc-hermes900.md
+++ b/docs/quick-start/receivers/hglrc-hermes900.md
@@ -96,7 +96,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via UART"
@@ -167,7 +167,7 @@ Some of the following procedures will not go through, particularly the via Passt
11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via WiFi"
@@ -242,7 +242,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -272,7 +272,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -319,7 +319,7 @@ Some of the following procedures will not go through, particularly the via Passt
14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Manual Upload via Local WiFi"
@@ -386,7 +386,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -416,7 +416,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -464,7 +464,7 @@ Some of the following procedures will not go through, particularly the via Passt
13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Auto Upload"
@@ -492,7 +492,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -522,7 +522,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -570,7 +570,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
[Lua Running]: ../../assets/images/lua/config-bw.png
diff --git a/docs/quick-start/receivers/hmep2400.md b/docs/quick-start/receivers/hmep2400.md
index d516871f6..5b13bd7a9 100644
--- a/docs/quick-start/receivers/hmep2400.md
+++ b/docs/quick-start/receivers/hmep2400.md
@@ -96,7 +96,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via UART"
@@ -168,7 +168,7 @@ Some of the following procedures will not go through, particularly the via Passt
11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via WiFi"
@@ -247,7 +247,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -277,7 +277,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -324,7 +324,7 @@ Some of the following procedures will not go through, particularly the via Passt
14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Manual Upload via Local WiFi"
@@ -395,7 +395,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -425,7 +425,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -473,7 +473,7 @@ Some of the following procedures will not go through, particularly the via Passt
13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Auto Upload"
@@ -501,7 +501,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -531,7 +531,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -580,7 +580,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
[Lua Running]: ../../assets/images/lua/config-bw.png
diff --git a/docs/quick-start/receivers/hmes900.md b/docs/quick-start/receivers/hmes900.md
index bd6173571..676de080e 100644
--- a/docs/quick-start/receivers/hmes900.md
+++ b/docs/quick-start/receivers/hmes900.md
@@ -97,7 +97,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
@@ -170,7 +170,7 @@ Some of the following procedures will not go through, particularly the via Passt
11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via WiFi"
@@ -249,7 +249,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -279,7 +279,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -326,7 +326,7 @@ Some of the following procedures will not go through, particularly the via Passt
14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Manual Upload via Local WiFi"
@@ -397,7 +397,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -427,7 +427,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -475,7 +475,7 @@ Some of the following procedures will not go through, particularly the via Passt
13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Auto Upload"
@@ -503,7 +503,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -533,7 +533,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -582,7 +582,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
## Updating your Receiver Firmware (ES915RX/ES868RX)
@@ -642,7 +642,7 @@ Some of the following procedures will not go through, particularly the via Passt
9. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via STLink"
@@ -691,7 +691,7 @@ Some of the following procedures will not go through, particularly the via Passt
9. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
10. Rewire your receiver to your Flight Controller.
diff --git a/docs/quick-start/receivers/hmpp2400.md b/docs/quick-start/receivers/hmpp2400.md
index 166c4b973..8a78a2922 100644
--- a/docs/quick-start/receivers/hmpp2400.md
+++ b/docs/quick-start/receivers/hmpp2400.md
@@ -83,7 +83,7 @@ The next steps will not be able to proceed smoothly and you'll have issues later
9. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via STLink"
@@ -136,7 +136,7 @@ The next steps will not be able to proceed smoothly and you'll have issues later
9. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
10. Rewire your receiver to your Flight Controller following the [Receiver Wiring] guide.
diff --git a/docs/quick-start/receivers/iflight2400.md b/docs/quick-start/receivers/iflight2400.md
index 47bb452f3..57f592a1c 100644
--- a/docs/quick-start/receivers/iflight2400.md
+++ b/docs/quick-start/receivers/iflight2400.md
@@ -101,7 +101,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via UART"
@@ -172,7 +172,7 @@ Some of the following procedures will not go through, particularly the via Passt
11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via WiFi"
@@ -247,7 +247,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -277,7 +277,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -324,7 +324,7 @@ Some of the following procedures will not go through, particularly the via Passt
14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Manual Upload via Local WiFi"
@@ -391,7 +391,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -421,7 +421,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -469,7 +469,7 @@ Some of the following procedures will not go through, particularly the via Passt
13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Auto Upload"
@@ -497,7 +497,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -527,7 +527,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -575,7 +575,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
[Lua Running]: ../../assets/images/lua/config-bw.png
diff --git a/docs/quick-start/receivers/iflight900.md b/docs/quick-start/receivers/iflight900.md
index 698da9599..74306d0b0 100644
--- a/docs/quick-start/receivers/iflight900.md
+++ b/docs/quick-start/receivers/iflight900.md
@@ -96,7 +96,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via UART"
@@ -167,7 +167,7 @@ Some of the following procedures will not go through, particularly the via Passt
11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via WiFi"
@@ -242,7 +242,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -272,7 +272,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -319,7 +319,7 @@ Some of the following procedures will not go through, particularly the via Passt
14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Manual Upload via Local WiFi"
@@ -386,7 +386,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -416,7 +416,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -464,7 +464,7 @@ Some of the following procedures will not go through, particularly the via Passt
13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Auto Upload"
@@ -492,7 +492,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -522,7 +522,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -570,7 +570,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
[Lua Running]: ../../assets/images/lua/config-bw.png
diff --git a/docs/quick-start/receivers/jumper-aion.md b/docs/quick-start/receivers/jumper-aion.md
index c82030cbd..339bb7371 100644
--- a/docs/quick-start/receivers/jumper-aion.md
+++ b/docs/quick-start/receivers/jumper-aion.md
@@ -101,7 +101,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via UART"
@@ -173,7 +173,7 @@ Some of the following procedures will not go through, particularly the via Passt
11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via WiFi"
@@ -249,7 +249,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -279,7 +279,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -326,7 +326,7 @@ Some of the following procedures will not go through, particularly the via Passt
14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Manual Upload via Local WiFi"
@@ -394,7 +394,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -424,7 +424,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -472,7 +472,7 @@ Some of the following procedures will not go through, particularly the via Passt
13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Auto Upload"
@@ -500,7 +500,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -530,7 +530,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -579,7 +579,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
[Lua Running]: ../../assets/images/lua/config-bw.png
diff --git a/docs/quick-start/receivers/jumper900.md b/docs/quick-start/receivers/jumper900.md
index 4127adf00..ed4731b96 100644
--- a/docs/quick-start/receivers/jumper900.md
+++ b/docs/quick-start/receivers/jumper900.md
@@ -70,7 +70,7 @@ template: main.html
10. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
11. Rewire your receiver to your Flight Controller. Connect RX2 and TX2 (you will need to solder on the STM32 pins; see step 2 above) to a flight controller. Configure your flight controller per the [FC Configuration Guide].
@@ -135,7 +135,7 @@ template: main.html
9. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
[Configurator Release]: ../../assets/images/ConfiguratorRelease.png
diff --git a/docs/quick-start/receivers/matek2400.md b/docs/quick-start/receivers/matek2400.md
index 5edb5773f..0f2a22386 100644
--- a/docs/quick-start/receivers/matek2400.md
+++ b/docs/quick-start/receivers/matek2400.md
@@ -102,7 +102,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via UART"
@@ -174,7 +174,7 @@ Some of the following procedures will not go through, particularly the via Passt
11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via WiFi"
@@ -250,7 +250,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -280,7 +280,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -327,7 +327,7 @@ Some of the following procedures will not go through, particularly the via Passt
14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Manual Upload via Local WiFi"
@@ -395,7 +395,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -425,7 +425,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -473,7 +473,7 @@ Some of the following procedures will not go through, particularly the via Passt
13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Auto Upload"
@@ -501,7 +501,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -531,7 +531,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -580,7 +580,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
[Lua Running]: ../../assets/images/lua/config-bw.png
diff --git a/docs/quick-start/receivers/r9.md b/docs/quick-start/receivers/r9.md
index fc48f156f..0171b7e6d 100644
--- a/docs/quick-start/receivers/r9.md
+++ b/docs/quick-start/receivers/r9.md
@@ -130,7 +130,7 @@ The next steps will not be able to proceed properly and you'll have issues later
9. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via STLink"
@@ -198,7 +198,7 @@ The next steps will not be able to proceed properly and you'll have issues later
9. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
10. Rewire your receiver to your Flight Controller.
diff --git a/docs/quick-start/receivers/radiomaster-rp-2400.md b/docs/quick-start/receivers/radiomaster-rp-2400.md
index 8f9b20002..9e5289521 100644
--- a/docs/quick-start/receivers/radiomaster-rp-2400.md
+++ b/docs/quick-start/receivers/radiomaster-rp-2400.md
@@ -108,7 +108,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via UART"
@@ -181,7 +181,7 @@ Some of the following procedures will not go through, particularly the via Passt
11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via WiFi"
@@ -258,7 +258,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -288,7 +288,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -335,7 +335,7 @@ Some of the following procedures will not go through, particularly the via Passt
14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Manual Upload via Local WiFi"
@@ -404,7 +404,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -434,7 +434,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -482,7 +482,7 @@ Some of the following procedures will not go through, particularly the via Passt
13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Auto Upload"
@@ -510,7 +510,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -540,7 +540,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -590,7 +590,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
[Lua Running]: ../../assets/images/lua/config-bw.png
diff --git a/docs/quick-start/receivers/siyiFRmini.md b/docs/quick-start/receivers/siyiFRmini.md
index 52629227f..315fcf493 100644
--- a/docs/quick-start/receivers/siyiFRmini.md
+++ b/docs/quick-start/receivers/siyiFRmini.md
@@ -70,7 +70,7 @@ template: main.html
9. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
10. Rewire your receiver to your Flight Controller.
@@ -150,7 +150,7 @@ template: main.html
9. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
[Configurator Release]: ../../assets/images/ConfiguratorRelease.png
diff --git a/docs/quick-start/receivers/updating.md b/docs/quick-start/receivers/updating.md
index f18921b74..5a4bb6eb8 100644
--- a/docs/quick-start/receivers/updating.md
+++ b/docs/quick-start/receivers/updating.md
@@ -54,7 +54,7 @@ description: General Guidelines for ExpressLRS Receiver firmware updating.
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via UART"
@@ -119,7 +119,7 @@ description: General Guidelines for ExpressLRS Receiver firmware updating.
11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via WiFi"
@@ -187,7 +187,7 @@ description: General Guidelines for ExpressLRS Receiver firmware updating.
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -217,7 +217,7 @@ description: General Guidelines for ExpressLRS Receiver firmware updating.
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -264,7 +264,7 @@ description: General Guidelines for ExpressLRS Receiver firmware updating.
14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Manual Upload via Local WiFi"
@@ -324,7 +324,7 @@ description: General Guidelines for ExpressLRS Receiver firmware updating.
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -354,7 +354,7 @@ description: General Guidelines for ExpressLRS Receiver firmware updating.
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -402,7 +402,7 @@ description: General Guidelines for ExpressLRS Receiver firmware updating.
13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Auto Upload"
@@ -430,7 +430,7 @@ description: General Guidelines for ExpressLRS Receiver firmware updating.
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -460,7 +460,7 @@ description: General Guidelines for ExpressLRS Receiver firmware updating.
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -502,7 +502,7 @@ description: General Guidelines for ExpressLRS Receiver firmware updating.
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
[Lua Running]: ../../assets/images/lua/config-bw.png
diff --git a/docs/quick-start/receivers/vantac2400.md b/docs/quick-start/receivers/vantac2400.md
index afc9ed21f..fd60b3205 100644
--- a/docs/quick-start/receivers/vantac2400.md
+++ b/docs/quick-start/receivers/vantac2400.md
@@ -96,7 +96,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via UART"
@@ -167,7 +167,7 @@ Some of the following procedures will not go through, particularly the via Passt
11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via WiFi"
@@ -242,7 +242,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -272,7 +272,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -319,7 +319,7 @@ Some of the following procedures will not go through, particularly the via Passt
14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Manual Upload via Local WiFi"
@@ -386,7 +386,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -416,7 +416,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -464,7 +464,7 @@ Some of the following procedures will not go through, particularly the via Passt
13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Auto Upload"
@@ -492,7 +492,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -522,7 +522,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -570,7 +570,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
[Lua Running]: ../../assets/images/lua/config-bw.png
diff --git a/docs/quick-start/receivers/voyager900.md b/docs/quick-start/receivers/voyager900.md
index 1a802062e..835d70e93 100644
--- a/docs/quick-start/receivers/voyager900.md
+++ b/docs/quick-start/receivers/voyager900.md
@@ -96,7 +96,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
@@ -168,7 +168,7 @@ Some of the following procedures will not go through, particularly the via Passt
11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via WiFi"
@@ -243,7 +243,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -273,7 +273,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -320,7 +320,7 @@ Some of the following procedures will not go through, particularly the via Passt
14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Manual Upload via Local WiFi"
@@ -387,7 +387,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -417,7 +417,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -465,7 +465,7 @@ Some of the following procedures will not go through, particularly the via Passt
13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "Auto Upload"
@@ -493,7 +493,7 @@ Some of the following procedures will not go through, particularly the via Passt
- The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
- 
+ 
=== "using the ExpressLRS Lua Script"
@@ -523,7 +523,7 @@ Some of the following procedures will not go through, particularly the via Passt
6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
- 
+ 
??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -571,7 +571,7 @@ Some of the following procedures will not go through, particularly the via Passt
8. The LED on the Receiver should return to Slow Blinking LED after a few seconds.
- 
+ 
## Updating your Receiver Firmware (STM-based)
@@ -631,7 +631,7 @@ Some of the following procedures will not go through, particularly the via Passt
9. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
=== "via STLink"
@@ -680,7 +680,7 @@ Some of the following procedures will not go through, particularly the via Passt
9. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
- 
+ 
10. Rewire your receiver to your Flight Controller.
diff --git a/docs/quick-start/receivers/wiring-up.md b/docs/quick-start/receivers/wiring-up.md
index 32584bb81..09451baf8 100644
--- a/docs/quick-start/receivers/wiring-up.md
+++ b/docs/quick-start/receivers/wiring-up.md
@@ -57,10 +57,10 @@ Observe the Receiver LED. It should have one of these behaviors:
|| LED Indication | Status |
|---|---|---|
-|| Slow blink 500ms on/off | Waiting for connection from transmitter |
-|| Double blink then pause | Binding mode is active |
-|| Fast blinking 25ms on/off | WiFi mode has started. Starts after 60s. |
-|| Solid on | Bootloader mode is active |
+|| Slow blink 500ms on/off | Waiting for connection from transmitter |
+|| Double blink then pause | Binding mode is active |
+|| Fast blinking 25ms on/off | WiFi mode has started. Starts after 60s. |
+|| Solid on | Bootloader mode is active |
If the Receiver uses an RGB LED(e.g. Foxeer LNA, BetaFPV SuperD, Happymodel EP Dual), the following can be observed:
diff --git a/docs/quick-start/transmitters/siyifm30.md b/docs/quick-start/transmitters/siyifm30.md
index 49bb63040..e6fcd48d8 100644
--- a/docs/quick-start/transmitters/siyifm30.md
+++ b/docs/quick-start/transmitters/siyifm30.md
@@ -58,7 +58,7 @@ JR Module Pin | FR Mini Pin | Description
| SPORT | TX2 | Use the TX2 pad on the receiver and remove the 4.7K pullup resistor. Without removing the resistor, the module will work okish as a transmitter, but firmware updates through OpenTX will fail with NoSync
-
+
### Flashing via STLink
@@ -114,7 +114,7 @@ Updates are done through OpenTX's built-in firmware flashing tool.
The only way I know of to disable the RDP is to use the STM32CubeProgrammer for Linux, or use a Windows VM / machine to use the ST-LINK.exe GUI / CLI to clear the RDP.
- 
+ 
* Click the "Connect" button to connect to the ST-LINK device. You'll probably get a popup error **Error: Data read failed**. That's normal. If it says it can't connect or no device is present, you'll have to figure that out first.
diff --git a/docs/quick-start/unbricking.md b/docs/quick-start/unbricking.md
index eb2121f02..921f9fbac 100644
--- a/docs/quick-start/unbricking.md
+++ b/docs/quick-start/unbricking.md
@@ -77,7 +77,7 @@ Follow the steps below very closely to recover your "bricked" Receiver.
10. Plug in LiPo or twist the 5v Wires together to power up the receiver (see Step 1). The receiver LED should be Solid.
- 
+ 
11. Wait for the process to finish, hopefully with the Success Message. Otherwise, repeat the procedure above or try a different approach (like reflashing via FTDI/UART Adapter).
@@ -89,7 +89,7 @@ Follow the steps below very closely to recover your "bricked" Receiver.
14. Repower up the receiver to verify it is back in its normal working state.
- 
+ 
### Wall of Text? Here's a vid!
diff --git a/docs/quick-start/webui.md b/docs/quick-start/webui.md
index c2d93abaa..1b489455d 100644
--- a/docs/quick-start/webui.md
+++ b/docs/quick-start/webui.md
@@ -120,7 +120,7 @@ This section is currently only available for the RadioMaster Ranger module.
2. Power-cycle your receiver (turn it Off then turn it back On). The Receiver LED should be blinking slowly as shown below.
- 
+ 
??? warning "Receiver LED not Blinking! (click/tap to expand)"
@@ -129,7 +129,7 @@ This section is currently only available for the RadioMaster Ranger module.
3. Wait for about 60 seconds or until the Receiver LED blinks rapidly indicating it is now in WiFi Mode.
- 
+ 
@@ -137,7 +137,7 @@ This section is currently only available for the RadioMaster Ranger module.
1. Make sure the Receiver and TX Module are in sync and bound. RSSI indicators on your Radio Home screen should be visible and the Receiver LED should be Solid as shown.
- 
+ 
2. Press the ++"SYS"++ Key on your Radio.
@@ -168,7 +168,7 @@ This section is currently only available for the RadioMaster Ranger module.
7. The `WiFi Running` screen will briefly show up. Your Receiver is now in WiFi mode as indicated by the rapidly blinking LED.
- 
+ 
!!! info "Note"
diff --git a/docs/software/dynamic-transmit-power.md b/docs/software/dynamic-transmit-power.md
index 1b20123cd..3f2c14e1b 100644
--- a/docs/software/dynamic-transmit-power.md
+++ b/docs/software/dynamic-transmit-power.md
@@ -92,13 +92,13 @@ Alternatively, a handset special function can be used to generate an audio notif
* Set a logical switch to `|Δ|>x` / `TPWR` / `1mW` as shown in L04 below. The logical switch triggers when the power changes by at least 1mW.
-
+
* For a readout when the power changes, set a special function triggered from the logical switch, and assign `Play Value` / `TPWR` / `1x` (SF10 in the picture). If instead you'd prefer the power to be read out periodically, choose a switch to enable the special function, and assign `Play Value` / `TPWR` / (SF11 in the picture, with 10s interval).
-
+
!!! note "Note"
diff --git a/docs/software/loan-model.md b/docs/software/loan-model.md
index 63c993ec8..da2fe97b4 100644
--- a/docs/software/loan-model.md
+++ b/docs/software/loan-model.md
@@ -39,7 +39,7 @@ description: Lend your ExpressLRS models to your friends without having to refla
* The receiver LED should go into the bind flashing state
-
+
### On the borrowers handset
@@ -47,7 +47,7 @@ description: Lend your ExpressLRS models to your friends without having to refla
* The receiver LED should turn solid on, and the handset should connect to the receiver
-
+
## Returning a "Loaned" Model
diff --git a/docs/software/model-config-match.md b/docs/software/model-config-match.md
index 51118feaa..5c570281f 100644
--- a/docs/software/model-config-match.md
+++ b/docs/software/model-config-match.md
@@ -56,7 +56,7 @@ The implementation follows this set of rules for handling half connections / ful
* For WiFi-enabled RX modules, use the WebUI to set the Model Match directly. "Model Match" must still be set to "On" in the Lua config.
-
+
### Clearing Model Match number
diff --git a/docs/software/stlink-fix.md b/docs/software/stlink-fix.md
index 23678e8eb..617257a05 100644
--- a/docs/software/stlink-fix.md
+++ b/docs/software/stlink-fix.md
@@ -19,10 +19,10 @@ Swapping out PIO's STLink folder contents with the current STLink will allow usi
- **Copy contents of "ST-Link Utility"**
`C:\Program Files (x86)\STMicroelectronics\STM32 ST-LINK Utility\ST-LINK Utility`
-
+
- **Paste files from "st-link utility" folder into "stlink" folder in your user PIO location**
`C:\Users\username\ .platformio\packages\tool-stm32duino`
-
+
diff --git a/docs/software/toolchain-install.md b/docs/software/toolchain-install.md
index fb162c074..7feca87e5 100644
--- a/docs/software/toolchain-install.md
+++ b/docs/software/toolchain-install.md
@@ -39,7 +39,7 @@ We recommend using VSCode's built-in Git client, as it requires the least 3rd pa
* Enter `Git: Clone`
-
+
* Click that! 👈
@@ -50,11 +50,11 @@ We recommend using VSCode's built-in Git client, as it requires the least 3rd pa
Before we can do any building, you need to select a release build of ELRS. For example, release [0.1.0-RC1](https://github.com/AlessandroAU/ExpressLRS/releases/tag/0.1.0-RC1). In Visual Studio Code select that tag. The location of the selector is shown below. 🖱️
-
+
-
+
Click the selector, and then type in the name of the tag, in this case `0.1.0-RC1`.
+
+
+
+
+
+
+
+
+