Can't generate room config

[panic-Patrick]

I have an Ecovacs Deebot T30 Pro Omni integrated with Home Assistant, and I want to create a room configuration. However, the button for this feature is disabled, and I cannot proceed. What could be the cause, and how can I resolve this issue?

[PiotrMachowski]

Unfortunately data required for automatic configuration of rooms is not provided by the Ecovacs integration. Which features of the card do you want to use? (Mainly - do you want to use custom zone cleaning or just room cleaning?)

[panic-Patrick]

I just want to select one or multiple rooms

[PiotrMachowski]

Please post your config here, I will try to prepare some guide for you

[panic-Patrick]

That's the config if the vacuum card.

type: custom:xiaomi-vacuum-map-card
entity: vacuum.dirt_vader
vacuum_platform: DeebotUniverse/Deebot-4-Home-Assistant
map_source:
 camera: image.dirt_vader_karte
map_modes: null

[PiotrMachowski]

1. Create a second card with this config:

    type: custom:xiaomi-vacuum-map-card
    entity: vacuum.dirt_vader
    vacuum_platform: Setup integer
    map_source:
      camera: image.dirt_vader_karte
    calibration_source:
      identity: true

2. Keep the card in edit mode and use map mode "Path" to create outlines for every room on the map (click on the map to create an outline, click "copy selection" when you are done for this room and move on to the next one)
3. Use the outlines in the main config to mark every room:

   type: custom:xiaomi-vacuum-map-card
   entity: vacuum.dirt_vader
   vacuum_platform: DeebotUniverse/Deebot-4-Home-Assistant
   map_source:
     camera: image.dirt_vader_karte
   calibration_source:
     identity: true
   map_modes:
     - template: vacuum_clean_segment
       predefined_selections:
         - id: 14
           outline: [[ 214, 321 ], [ 242, 321 ], [ 241, 274 ], [ 231, 274 ]]
           label:
             text: "Bedroom"
             x: 229
             y: 303
             offset_y: 35
           icon:
             name: "mdi:bed"
             x: 229
             y: 303
         - id: 19
           outline: [[ 214, 272 ], [ 230, 272 ], [ 230, 256 ], [ 214, 256 ]]
           label:
             text: "Bathroom"
             x: 222
             y: 264
             offset_y: 35
           icon:
             name: "mdi:shower"
             x: 22282
             y: 26496

4. Remember to provide correct IDs of every room (they have to match ones generated by the vacuum)

[panic-Patrick]

When I start at Step One and add a new card with the code, the map does not show.

[PiotrMachowski]

Oh, right, I have adjusted my comment

[panic-Patrick]

Yes, thanks a lot. Do you know the styling for the labels? They are hard to read.

[PiotrMachowski]

#320

They use map-card-room-label-color and map-card-room-label-color-selected

[panic-Patrick]

Yes that worked. Thanks for your help