A Raspberry Pi Zero W based wifi scanner
This Project is currently under development
using a simple push-button with pull-up resistor
| buttons | GPIO |
|---|---|
| GND | GND |
| enter | 21 |
| up | 22 |
| down | 17 |
| left | 27 |
| right | 6 |
using a common-cathode RGB-LED
| LED | GPIO |
|---|---|
| GND | GND |
| red | 13 |
| green | 19 |
| blue | 26 |
| OLED | GPIO |
|---|---|
| GND | GND |
| VCC | 3V3 |
| SCL | 3 SCL |
| SDA | 2 SDA |
- flash SD-Card with Raspberry Pi OS light (configure your wifi now!)
for more information see this article by the Raspberry Pi Spy
wget https://raw.githubusercontent.com/Xilef12000/RPi0w-wifi-catcher/main/setup.sh
sudo chmod a+x setup.sh
sudo sh setup.sh
open the webpage on http://YOURPI'SIP:8080/wifi/content/
short Enter press: turn display on long Enter press: turn pi off short left/right press while display is on: decrease/increase delay between scanning