Issue for JuliaRegistrator

[ferdiu]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/86578

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.9.0 -m "<description of version>" 6a6a6e6739edffe052051fd20bc43ed58d4e7c6b
git push origin v0.9.0

Also, note the warning: This looks like a new registration that registers version 0.9.0.
Ideally, you should register an initial release with 0.0.1, 0.1.0 or 1.0.0 version numbers
This can be safely ignored. However, if you want to fix this you can do so. Call register() again after making the fix. This will update the Pull request.

[giopaglia]

@JuliaRegistrator register()

[JuliaRegistrator]

Error while trying to register: Register Failed
@giopaglia, it looks like you are not a publicly listed member/owner in the parent organization (aclai-lab).
If you are a member/owner, you will need to change your membership to public. See GitHub Help

[giopaglia]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/87047

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.9.1 -m "<description of version>" 501c605c03887ed3aeda1858e03203e4782ea51c
git push origin v0.9.1

[giopaglia]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/87583

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.10.0 -m "<description of version>" ad71732098df3029d28c5d3e912e5d0b81d64a50
git push origin v0.10.0

[giopaglia]

@JuliaRegistrator register

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/89123

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.10.1 -m "<description of version>" 4d075211ddfd9a186a209a1020d0b6bbd9363d33
git push origin v0.10.1

[giopaglia]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/95091

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.11.0 -m "<description of version>" bc0666db0774ba677e4ebd4afa5bfaf533961d50
git push origin v0.11.0

[giopaglia]

@JuliaRegistrator register

[JuliaRegistrator]

Registration pull request updated: JuliaRegistries/General/95091

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.11.0 -m "<description of version>" 54d729935cddb2601752a5348ffd1f3f1ada1494
git push origin v0.11.0

[giopaglia]

@JuliaRegistrator register()

[JuliaRegistrator]

Error while trying to register: Version 0.11.0 already exists

[giopaglia]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/95290

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.11.1 -m "<description of version>" 23420796f6efbcb1155be3d51ac6b6607f59694b
git push origin v0.11.1

[giopaglia]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request updated: JuliaRegistries/General/95290

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.11.1 -m "<description of version>" b225cf7ffaab0ad3c9cf8fd873884fd69294a0ec
git push origin v0.11.1

[giopaglia]

@JuliaRegistrator register()

Release notes:

Breaking change

AbstractDimensionalDataset's are not AbstractArray's anymore, but AbstractVector's of AbstractArray's of the same dimension.

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/96119

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.12.0 -m "<description of version>" 6a438da98b9879cd655a8daace0c87d5bd9743d9
git push origin v0.12.0

[JuliaRegistrator]

Registration pull request updated: JuliaRegistries/General/96119

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.12.0 -m "<description of version>" 6a438da98b9879cd655a8daace0c87d5bd9743d9
git push origin v0.12.0

[giopaglia]

@JuliaRegistrator register()

[giopaglia]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/118289

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.15.3 -m "<description of version>" 644288cbecf0d5abbfba3d0649f521bd8f9ff1a3
git push origin v0.15.3

[giopaglia]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/118933

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.15.4 -m "<description of version>" f03c81333a77d018367b78623c8cbdc381c40286
git push origin v0.15.4

[giopaglia]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request updated: JuliaRegistries/General/118933

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.15.4 -m "<description of version>" 77c3495de87df42b41c446098eedc3260ea47ac3
git push origin v0.15.4

[giopaglia]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/119168

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.15.5 -m "<description of version>" 09bcde39f3f52fb915e2b38d087a8974e3c992ec
git push origin v0.15.5

Also, note the warning: Version 0.15.5 skips over 0.15.4
This can be safely ignored. However, if you want to fix this you can do so. Call register() again after making the fix. This will update the Pull request.

[giopaglia]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request updated: JuliaRegistries/General/119168

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.15.5 -m "<description of version>" 1cc96b7cf7d616c938395b825ccc13f4c7f32c9b
git push origin v0.15.5

Also, note the warning: Version 0.15.5 skips over 0.15.4
This can be safely ignored. However, if you want to fix this you can do so. Call register() again after making the fix. This will update the Pull request.

[giopaglia]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request updated: JuliaRegistries/General/119168

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.15.5 -m "<description of version>" 1cc96b7cf7d616c938395b825ccc13f4c7f32c9b
git push origin v0.15.5

Also, note the warning: Version 0.15.5 skips over 0.15.4
This can be safely ignored. However, if you want to fix this you can do so. Call register() again after making the fix. This will update the Pull request.

[giopaglia]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/121110

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.15.6 -m "<description of version>" 1fc92fd1a48954995fe3739290fbcc76109c7eba
git push origin v0.15.6

Also, note the warning: Version 0.15.6 skips over 0.15.4
This can be safely ignored. However, if you want to fix this you can do so. Call register() again after making the fix. This will update the Pull request.

[giopaglia]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/121112

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.16.0 -m "<description of version>" 1fd47fbd8f6c4b474d7b1194b1b096f62c367652
git push origin v0.16.0

[giopaglia]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/122586

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.16.1 -m "<description of version>" 5c399aae3ca56114ea68fe8f9b690e385495151e
git push origin v0.16.1

[giopaglia]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request updated: JuliaRegistries/General/122586

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.16.1 -m "<description of version>" 5c399aae3ca56114ea68fe8f9b690e385495151e
git push origin v0.16.1

[giopaglia]

@JuliaRegistrator register

Release notes:

Breaking changes

• Remove canonical features
• Fixed scalar PLA module

[JuliaRegistrator]

Registration pull request updated: JuliaRegistries/General/122586

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.16.1 -m "<description of version>" 5c399aae3ca56114ea68fe8f9b690e385495151e
git push origin v0.16.1

[giopaglia]

@JuliaRegistrator register

Release notes:

Breaking changes

• Remove canonical features
• Fixed scalar PLA module

[JuliaRegistrator]

Registration pull request updated: JuliaRegistries/General/122586

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.16.1 -m "<description of version>" 5c399aae3ca56114ea68fe8f9b690e385495151e
git push origin v0.16.1