Status: tested
Rested factory:
- JLCPCB
Additional parts:
- LK-AC93 - case by Shenzhen Shiny Enclosure Technology Co., Ltd.
- 2.4G Built-in Copper Tube Antenna IPEX MHF1 1.13 Cable Omnidirectional 2dBi Gain IPEX Interface
Features:
-
Support of any USB power supply with QC2, QC3 or USB-PD (Power Delivery) specification
-
Operating in the local library, without the need for cloud access
-
Support of Home Assistant via the MQTT protocol (to configure the device, please visit Tasmota docs)
Hardware specification:
- Viewing angle 360°
- CPU: ESP32 series of SoCs, Xtensa 32-bit LX6 microprocessor, up to 240 MHz
- Memory: 448 KB ROM, 520 KB SRAM, 8 MB FLASH
- Wireless protocol: IEEE 802.11b/g/n (2.4 GHz Wi-Fi)
- Input voltage: DC 5V USB-C (QC2, QC3, PD)
- Standby consumption: 95mA
- Weight: 36g
Firmware:
- Powered by Tasmota, an open firmware distributed under GNU GPLv3, the firmware can be upgraded via USB-C or OTA.
- The driver enables sending IR codes through an IR transmitter and receiving them through an IR receiver via IRremoteESP8266 library.