Makefile.in

# Copyright (C) 2001-2020 Artifex Software, Inc.
# All Rights Reserved.
#
# This software is provided AS-IS with no warranty, either express or
# implied.
#
# This software is distributed under license and may not be copied,
# modified or distributed except as expressly authorized under the terms
# of the license contained in the file LICENSE in this distribution.
#
# Refer to licensing information at http://www.artifex.com or contact
# Artifex Software, Inc.,  1305 Grant Avenue - Suite 200, Novato,
# CA 94945, U.S.A., +1(415)492-9861, for further information.
#
# makefile template for/from the autoconf build.
# @configure_input@

# ------------------------------- Options ------------------------------- #

####### The following are the only parts of the file you should need to edit.

# Define the directory for the final executable, and the
# source, generated intermediate file, and object directories
# for the graphics library (GL) and the PostScript/PDF interpreter (PS).

PACKAGE=ghostscript
BINDIR=./$(BUILDDIRPREFIX)bin
GLSRCDIR=@srcdir@/base
DEVSRCDIR=@srcdir@/devices
GENORDERED_SRCDIR=@srcdir@/toolbin/halftone/gen_ordered
GLGENDIR=./$(BUILDDIRPREFIX)@OBJDIR_BSDMAKE_WORKAROUND@
GLOBJDIR=./$(BUILDDIRPREFIX)@OBJDIR_BSDMAKE_WORKAROUND@
DEVGENDIR=./$(BUILDDIRPREFIX)@OBJDIR_BSDMAKE_WORKAROUND@
DEVOBJDIR=./$(BUILDDIRPREFIX)@OBJDIR_BSDMAKE_WORKAROUND@
AUXDIR=$(GLGENDIR)/aux@AUXDIRPOSTFIX@
PSSRCDIR=@srcdir@/psi
PSLIBDIR=@srcdir@/lib
PSRESDIR=@srcdir@/Resource
PSGENDIR=./$(BUILDDIRPREFIX)@OBJDIR_BSDMAKE_WORKAROUND@
PSOBJDIR=./$(BUILDDIRPREFIX)@OBJDIR_BSDMAKE_WORKAROUND@

PCL5SRCDIR=@srcdir@/pcl/pcl
PCL5GENDIR=./$(BUILDDIRPREFIX)@OBJDIR_BSDMAKE_WORKAROUND@
PCL5OBJDIR=./$(BUILDDIRPREFIX)@OBJDIR_BSDMAKE_WORKAROUND@

PXLSRCDIR=@srcdir@/pcl/pxl
PXLGENDIR=./$(BUILDDIRPREFIX)@OBJDIR_BSDMAKE_WORKAROUND@
PXLOBJDIR=./$(BUILDDIRPREFIX)@OBJDIR_BSDMAKE_WORKAROUND@

PLSRCDIR=@srcdir@/pcl/pl
PLGENDIR=./$(BUILDDIRPREFIX)@OBJDIR_BSDMAKE_WORKAROUND@
PLOBJDIR=./$(BUILDDIRPREFIX)@OBJDIR_BSDMAKE_WORKAROUND@

XPSSRCDIR=@srcdir@/xps
XPSGENDIR=./$(BUILDDIRPREFIX)@OBJDIR_BSDMAKE_WORKAROUND@
XPSOBJDIR=./$(BUILDDIRPREFIX)@OBJDIR_BSDMAKE_WORKAROUND@

GPDLSRCDIR=@srcdir@/gpdl
GPDLGENDIR=./$(BUILDDIRPREFIX)@OBJDIR_BSDMAKE_WORKAROUND@
GPDLOBJDIR=./$(BUILDDIRPREFIX)@OBJDIR_BSDMAKE_WORKAROUND@

URFSRCDIR=@srcdir@/urf
URFGENDIR=./$(BUILDDIRPREFIX)@OBJDIR_BSDMAKE_WORKAROUND@
URFOBJDIR=./$(BUILDDIRPREFIX)@OBJDIR_BSDMAKE_WORKAROUND@

CONTRIBDIR=@srcdir@/contrib

# Do not edit the next group of lines.

include $(GLSRCDIR)/version.mak
DD=$(GLGENDIR)/
GLD=$(GLGENDIR)/
PSD=$(PSGENDIR)/

# ------ Generic options ------ #

# Define the installation commands and target directories for
# executables and files.  The commands are only relevant to `make install';
# the directories also define the default search path for the
# initialization files (gs_*.ps) and the fonts.

INSTALL = $(GLSRCDIR)/instcopy -c
INSTALL_PROGRAM = $(INSTALL) -m 755
INSTALL_DATA = $(INSTALL) -m 644
INSTALL_SHARED = @INSTALL_SHARED@

prefix = @prefix@
datarootdir = @datarootdir@
exec_prefix = @exec_prefix@
bindir = @bindir@
scriptdir = $(bindir)
includedir = @includedir@
libdir = @libdir@
mandir = @mandir@
man1ext = 1
man1dir = $(mandir)/man$(man1ext)
datadir = @datadir@
docdir = @docdir@@VERSIONED_PATH@

# The following must be substituted using @datadir@ and @libdir@
# to avoid adding RPM generation paths (CUPS STR #1112)
gsdir = @datadir@/ghostscript
gsdatadir = $(gsdir)@VERSIONED_PATH@
gssharedir = @libdir@/ghostscript@VERSIONED_PATH@
gsincludedir = @includedir@/ghostscript/

exdir=$(gsdatadir)/examples
GS_DOCDIR=$(docdir)

# Choose whether to compile the .ps initialization files into the executable.
# See gs.mak for details.

COMPILE_INITS=@COMPILE_INITS@

# Define the default directory/ies for the runtime
# initialization and font files.  Separate multiple directories with a :.

GS_LIB_DEFAULT=$(gsdatadir)/Resource/Init:$(gsdatadir)/lib:$(gsdatadir)/Resource/Font:$(gsdir)/fonts:@fontpath@

# Define the default search path for Tesseract.  Separate multiple directories
# with a :.

TESSDATA=@tessdata@

# Define the default directory for cached data files
# this must be a single path.

GS_CACHE_DIR="~/.ghostscript/cache/"

# Define whether or not searching for initialization files should always
# look in the current directory first.  This leads to well-known security
# and confusion problems,  but may be convenient sometimes.

SEARCH_HERE_FIRST=0

# Define the name of the interpreter initialization file.
# (There is no reason to change this.)

GS_INIT=gs_init.ps

# Choose generic configuration options.

TARGET_ARCH_FILE=@ARCH_CONF_HEADER@

# -DDEBUG
#	includes debugging features (-Z switch) in the code.
#	  Code runs substantially slower even if no debugging switches
#	  are set.

GENOPT=
GENOPTAUX=

# Choose capability options.

# -DHAVE_BSWAP32
#       use bswap32 intrinsic
# -DHAVE_BYTESWAP_H
#       use byteswap.h functions
#
# -DHAVE_MKSTEMP
#	uses mkstemp instead of mktemp
#		This uses the more secure temporary file creation call
#		Enable this if it is available on your platform.
# -DHAVE_FILE64
#	use marked versions of the stdio FILE calls, fopen64() et al.
#
# -DHAVE_MKSTEMP64
#	use non-standard function mkstemp64()
#
# -DHAVE_LIBIDN
#	use libidn to canonicalize Unicode passwords
#
# -DHAVE_SETLOCALE
#	call setlocale(LC_CTYPE) when running as a standalone app
# -DHAVE_SSE2
#       use sse2 intrinsics

CAPOPT= @HAVE_MKSTEMP@ @HAVE_FILE64@ @HAVE_FSEEKO@ @HAVE_MKSTEMP64@ @HAVE_FONTCONFIG@ @HAVE_LIBIDN@ @HAVE_SETLOCALE@ @HAVE_SSE2@ @HAVE_DBUS@ @HAVE_BSWAP32@ @HAVE_BYTESWAP_H@ @HAVE_STRERROR@ @HAVE_ISNAN@ @HAVE_ISINF@ @HAVE_FPCLASSIFY@ @HAVE_PREAD_PWRITE@ @RECURSIVE_MUTEXATTR@

# Define the name of the executable file.

GS=@GS@
GS_SO_BASE=@GS@
GS_SONAME=@GS_SONAME@
GS_SONAME_MAJOR=@GS_SONAME_MAJOR@
GS_SONAME_MAJOR_MINOR=@GS_SONAME_MAJOR_MINOR@

PCL=@PCL@
PCL_SO_BASE=@PCL@
PCL_SONAME=@PCL_SONAME@
PCL_SONAME_MAJOR=@PCL_SONAME_MAJOR@
PCL_SONAME_MAJOR_MINOR=@PCL_SONAME_MAJOR_MINOR@

XPS=@XPS@
XPS_SO_BASE=@XPS@
XPS_SONAME=@XPS_SONAME@
XPS_SONAME_MAJOR=@XPS_SONAME_MAJOR@
XPS_SONAME_MAJOR_MINOR=@XPS_SONAME_MAJOR_MINOR@

GPDL=@GPDL@
GPDL_SO_BASE=@GPDL@
GPDL_SONAME=@GPDL_SONAME@
GPDL_SONAME_MAJOR=@GPDL_SONAME_MAJOR@
GPDL_SONAME_MAJOR_MINOR=@GPDL_SONAME_MAJOR_MINOR@

XE=@EXEEXT@
XEAUX=@AUXEXEEXT@

PCL_TARGET=@PCL_TARGET@
XPS_TARGET=@XPS_TARGET@
GPDL_TARGET=@GPDL_TARGET@

PCL_XPS_PDL_TARGETS=$(PCL_TARGET) $(XPS_TARGET) $(GPDL_TARGET)

# Define the directories for debugging and profiling binaries, relative to
# the standard binaries.

DEBUGDIRPREFIX=debug
MEMENTODIRPREFIX=mem
SANITIZEDIRPREFIX=san
PGDIRPREFIX=pg

# Are we include the CAL library?
WITH_CAL=@WITH_CAL@
CALSRCDIR=@CALSRCDIR@
CAL_CFLAGS=@CAL_CFLAGS@
CAL_SSE4_2_CFLAGS=@CAL_SSE4_2_CFLAGS@
CAL_AVX2_CFLAGS=@CAL_AVX2_CFLAGS@
CAL_NEON_CFLAGS=@CAL_NEON_CFLAGS@

# Define whether to compile in the FreeType library, and if so, where
# the source tree is location. Otherwise, what library name to use
# in linking to a shared implementation.

FT_BRIDGE=@FT_BRIDGE@
SHARE_FT=@SHARE_FT@
FTSRCDIR=@FTSRCDIR@
FT_CFLAGS=@FT_CFLAGS@ -DSHARE_FT=@SHARE_FT@
FT_LIBS=@FT_LIBS@
FT_LIB_PATH=@FT_LIB_PATH@
FT_CONFIG_SYSTEM_ZLIB=@FT_SYS_ZLIB@

# Define whether to compile in UFST.
# FAPI/UFST depends on UFST_BRIDGE being undefined - hence the construct below.
# (i.e. use "UFST_BRIDGE=1" or *not to define UFST_BRIDGE to anything*)
# As UFST is not used for fonts embedded in input files, we should still have
# Freetype enabled, above.
@INSERT_UFST_BRIDGE_EQUAL_ONE@
UFST_ROOT=@UFST_ROOT@
UFST_LIB_EXT=@UFST_LIB_EXT@

UFST_ROMFS_ARGS?=-b \
 -P $(UFST_ROOT)/fontdata/mtfonts/pcl45/mt3/ -d fontdata/mtfonts/pcl45/mt3/ pcl___xj.fco plug__xi.fco wd____xh.fco \
 -P $(UFST_ROOT)/fontdata/mtfonts/pclps2/mt3/ -d fontdata/mtfonts/pclps2/mt3/ pclp2_xj.fco \
 -c -P $(PSSRCDIR)/../lib/ -d Resource/Init/ FAPIconfig-FCO

UFSTROMFONTDIR=\"%rom%fontdata/\"
UFSTDISCFONTDIR?=\"$(UFST_ROOT)/fontdata/\"


UFST_CFLAGS=@UFST_CFLAGS@

# Define the directory where the IJG JPEG library sources are stored,
# and the major version of the library that is stored there.
# You may need to change this if the IJG library version changes.
# See jpeg.mak for more information.

JSRCDIR=@LIBJPEGDIR@

# Note: if a shared library is used, it may not contain the
# D_MAX_BLOCKS_IN_MCU patch, and thus may not be able to read
# some older JPEG streams that violate the standard. If the JPEG
# library built from local sources, the patch will be applied.

SHARE_JPEG=@SHARE_LIBJPEG@
JPEG_NAME=jpeg

# Define the directory where the PNG library sources are stored,
# and the version of the library that is stored there.
# You may need to change this if the libpng version changes.
# See png.mak for more information.

SHARE_LIBPNG=@SHARE_LIBPNG@
PNGSRCDIR=@LIBPNGDIR@
LIBPNG_NAME=png

# libtiff
SHARE_LIBTIFF=@SHARE_LIBTIFF@
TIFFSRCDIR=@LIBTIFFDIR@
TIFFCONFDIR=@LIBTIFFCONFDIR@
TIFFPLATFORM=unix
TIFFCONFIG_SUFFIX=
LIBTIFF_NAME=tiff
TIFF_CFLAGS=@TIFFCFLAGS@
ENABLE_TIFF=@ENABLETIFF@

# Define the directory where the zlib sources are stored.
# See zlib.mak for more information.

SHARE_ZLIB=@SHARE_ZLIB@
ZSRCDIR=@ZLIBDIR@
#ZLIB_NAME=gz
ZLIB_NAME=z
ZLIB_CFLAGS=@ZLIBCFLAGS@

# Choose shared or compiled in libjbig2dec and source location
# JBIG2_LIB=jbig2dec
JBIG2_LIB=@JBIG2_DECODER@
SHARE_JBIG2=@SHARE_JBIG2@
JBIG2SRCDIR=@JBIG2DIR@
JBIG2_CFLAGS=@JBIG2_AUTOCONF_CFLAGS@

# uncomment the following three lines and one of the last two to
# compile in the Luratech ldf_jb2 codec
#JBIG2_LIB=luratech
#SHARE_JBIG2=0
#JBIG2SRCDIR=ldf_jb2
#JBIG2_CFLAGS=-DUSE_LDF_JB2 -DLINUX
#JBIG2_CFLAGS=-DUSE_LDF_JB2 -DMAC -DMAC_OS_X_BUILD


# Choose the library to use for (JPXDecode support)
# whether to link to an external build or compile in from source
# and source location and configuration flags for compiling in
JPX_LIB=@JPX_DECODER@
SHARE_JPX=@SHARE_JPX@
JPXSRCDIR=@JPXDIR@
JPX_CFLAGS=-DSHARE_JPX=$(SHARE_JPX) @JPX_AUTOCONF_CFLAGS@ @JPX_SSE_CFLAGS@

# uncomment the following three lines and one of the last two to
# compile in the Luratech lwf_jp2 codec
#JPX_LIB=luratech
#SHARE_JPX=0
#JPXSRCDIR=lwf_jp2
#JPX_CFLAGS=-DUSE_LWF_JP2 -DLINUX
#JPX_CFLAGS=-DUSE_LWF_JP2 -DMAC -DMAC_OS_X_BUILD

# Uncomment the following 4 lines to to compile in OpenJPEG codec
#JPX_LIB=openjpeg
#SHARE_JPX=0
#JPXSRCDIR=openjpeg
#JPX_CFLAGS=-DUSE_OPENJPEG_JP2 -DOPJ_STATIC

# options for lcms color management library
SHARE_LCMS=@SHARELCMS@
LCMS2SRCDIR=@LCMS2DIR@
LCMS2MTSRCDIR=@LCMS2MTDIR@
LCMS2_CFLAGS=-DSHARE_LCMS=$(SHARE_LCMS) @LCMS2_ENDIAN@ @SQRTF_SUBST@  @LCMS2_PTR_ALIGNMENT@

# Which CMS are we using?
# Options are currently lcms or lcms2
WHICH_CMS=@WHICHLCMS@

# Do we have URF support?
ENABLE_URF=@ENABLEURF@
GPDL_URF_TOP_OBJ=@GPDL_URF_TOP_OBJ@
URF_INCLUDE=@URF_INCLUDE@
URF_DEV=@URF_DEV@
SURFX_H=@SURFX_H@

EXPATSRCDIR=@EXPATDIR@
EXPAT_CFLAGS=@EXPAT_CFLAGS@
EXPATGENDIR=$(GLGENDIR)
EXPATOBJDIR=$(GLOBJDIR)
EXPATINCDIR = $(EXPATSRCDIR)$(D)lib
SHARE_EXPAT=@SHARE_EXPAT@

JPEGXR_SRCDIR=@SRCDIR@/jpegxr
SHARE_JPEGXR=0
JPEGXR_GENDIR=$(GLGENDIR)
JPEGXR_OBJDIR=$(GLOBJDIR)

# Define the directory where the ijs source is stored,
# and the process forking method to use for the server.
# See ijs.mak for more information.

SHARE_IJS=@SHAREIJS@
IJS_NAME=@IJSLIB@
IJSSRCDIR=@IJSDIR@
IJSEXECTYPE=unix

# Define install location for 'cups' device/filter support
CUPSLIBS=@CUPSLIBS@
CUPSLIBDIRS=@CUPSLIBDIRS@
CUPSSERVERBIN=@CUPSSERVERBIN@
CUPSSERVERROOT=@CUPSSERVERROOT@
CUPSDATA=@CUPSDATA@
CUPSPDFTORASTER=@CUPSPDFTORASTER@

SHARE_LCUPS=@SHARELCUPS@
LCUPS_NAME=cups
LCUPSSRCDIR=@CUPS_DIR@
LCUPSBUILDTYPE=@LCUPSBUILDTYPE@
CUPS_CC=$(CC)

SHARE_LCUPSI=@SHARELCUPSI@
LCUPSI_NAME=cupsimage
LCUPSISRCDIR=@CUPS_DIR@
CUPS_CC=$(CC)

CUPSCFLAGS=@CUPSCFLAGS@ -DSHARE_LCUPS=$(SHARE_LCUPS) -DSHARE_LCUPSI=$(SHARE_LCUPSI)

# Define how to build the library archives.  (These are not used in any
# standard configuration.)

AR=ar
ARFLAGS=qc
RANLIB=@RANLIB@
STRIP_XE=@STRIP_XE@
STRIP_XE_OPTS=

# ------ Platform-specific options ------ #

# Define the name of the C compiler (target and host (AUX))

CC=@CC@
CCAUX=@CCAUX@

# Define the name of the linker for the final link step.
# Normally this is the same as the C compiler.

CCLD=$(CC)
CCAUXLD=$(CCAUX)

# Define the default gcc flags.
GCFLAGS=@CPPFLAGS@ @GCFLAGS@ @CFLAGS@ @HAVE_POPEN_PROTO@
GCFLAGSAUX=@GCFLAGSAUX@ @CFLAGSAUX@ @HAVE_POPEN_PROTO@

# Define the added flags for standard, debugging, profiling
# and shared object builds.

CFLAGS_STANDARD=@OPT_CFLAGS@
CFLAGS_DEBUG=@DBG_CFLAGS@
CFLAGS_PROFILE=-pg @OPT_CFLAGS@
CFLAGS_SO=@DYNAMIC_CFLAGS@

CFLAGSAUX_STANDARD=@CFLAGSAUX_STANDARD@
CFLAGSAUX_DEBUG=@CFLAGSAUX_DEBUG@
CFLAGSAUX_PROFILE=-pg @CFLAGSAUX_STANDARD@

# Define the extra flags added for address sanitizer builds

CFLAGS_SANITIZE=@CFLAGS_SANITIZE@
LDFLAGS_SANITIZE=$(CFLAGS_SANITIZE)

# Define the other compilation flags.  Add at most one of the following:
#	-DBSD4_2 for 4.2bsd systems.
#	-DSYSV for System V or DG/UX.
# 	-DSYSV -D__SVR3 for SCO ODT, ISC Unix 2.2 or before,
#	   or any System III Unix, or System V release 3-or-older Unix.
#	-DSVR4 -DSVR4_0 (not -DSYSV) for System V release 4.0.
#	-DSVR4 (not -DSYSV) for System V release 4.2 (or later) and Solaris 2.
# XCFLAGS can be set from the command line.
# We don't include -ansi, because this gets in the way of the platform-
#   specific stuff that <math.h> typically needs; nevertheless, we expect
#   gcc to accept ANSI-style function prototypes and function definitions.
# CFLAGS from autoconf
AC_CFLAGS=@DYNAMIC_FLAGS@

# fontconfig flags, used by unix-aux.mak
FONTCONFIG_CFLAGS=@FONTCONFIG_CFLAGS@
FONTCONFIG_LIBS=@FONTCONFIG_LIBS@

# DBus flags, used by cups.mak
DBUS_CFLAGS=@DBUS_CFLAGS@
DBUS_LIBS=@DBUS_LIBS@

# defines from autoconf; note that we don't use all of these at present.
ACDEFS=@DEFS@

CFLAGS_VISIBILITY=@CFLAGS_VISIBILITY@

CFLAGS=$(CFLAGS_STANDARD) $(GCFLAGS) $(AC_CFLAGS) $(XCFLAGS) @CLUSTER_CFLAGS@
CFLAGSAUX=$(CFLAGSAUX_STANDARD) $(GCFLAGSAUX) $(XCFLAGSAUX)

# Define platform flags for ld.
# SunOS 4.n may need -Bstatic.
# Solaris 2.6 (and possibly some other versions) with any of the SHARE_
# parameters set to 1 may need
#	-R /usr/local/xxx/lib:/usr/local/lib
# giving the full path names of the shared library directories.
# XLDFLAGS can be set from the command line.
# AC_LDFLAGS from autoconf
AC_LDFLAGS=@X_LDFLAGS@

LDFLAGS=@LDFLAGS@ $(AC_LDFLAGS) $(XLDFLAGS)

LDFLAGSAUX=@LDFLAGSAUX@

GS_LDFLAGS=$(LDFLAGS)
PCL_LDFLAGS=$(LDFLAGS)
XPS_LDFLAGS=$(LDFLAGS)
PDL_LDFLAGS=$(LDFLAGS)

GS_LDFLAGS_SO=@GS_DYNAMIC_LDFLAGS@
PCL_LDFLAGS_SO=@PCL_DYNAMIC_LDFLAGS@
XPS_LDFLAGS_SO=@XPS_DYNAMIC_LDFLAGS@
PDL_LDFLAGS_SO=@PDL_DYNAMIC_LDFLAGS@

# Define any extra libraries to link into the executable.
# ISC Unix 2.2 wants -linet.
# SCO Unix needs -lsocket if you aren't including the X11 driver.
# SVR4 may need -lnsl.
# Solaris may need -lnsl -lsocket -lposix4.
# (Libraries required by individual drivers are handled automatically.)

EXTRALIBS=$(XTRALIBS) @LIBS@ @DYNAMIC_LIBS@ @FONTCONFIG_LIBS@ @FT_LIBS@ @JPX_AUTOCONF_LIBS@ @EXPAT_LIBS@
AUXEXTRALIBS=@AUXEXTRALIBS@ @AUX_SHARED_ZLIB@

# Define the standard libraries to search at the end of linking.
# Most platforms require -lpthread for the POSIX threads library;
# on FreeBSD, change -lpthread to -lc_r; BSDI and perhaps some others
# include pthreads in libc and don't require any additional library.
# All reasonable platforms require -lm, but Rhapsody and perhaps one or
# two others fold libm into libc and don't require any additional library.

STDLIBS=@PTHREAD_LIBS@ -lm @TESSERACT_LIBS@

# Define the include switch(es) for the X11 header files.
# This can be null if handled in some other way (e.g., the files are
# in /usr/include, or the directory is supplied by an environment variable)

XINCLUDE=@X_CFLAGS@

# Define the directory/ies and library names for the X11 library files.
# XLIBDIRS is for ld and should include -L; XLIBDIR is for LD_RUN_PATH
# (dynamic libraries on SVR4) and should not include -L.
# Newer SVR4 systems can use -R in XLIBDIRS rather than setting XLIBDIR.
# Both can be null if these files are in the default linker search path.

# Solaris and other SVR4 systems with dynamic linking probably want
#XLIBDIRS=-L/usr/openwin/lib -R/usr/openwin/lib
# X11R6 (on any platform) may need
#XLIBS=Xt SM ICE Xext X11

# We use the autoconf macro AC_PATH_XTRA which defines X_LIBS with
# the -L (or whatever). It also defines X_PRE_LIBS and X_EXTRA_LIBS
# all three of which are stripped and slotted into XLIBS below.
# Usually however, all but X_LIBS are empty on modern platforms.
XLIBDIRS=@X_LDFLAGS@
XLIBDIR=
#XLIBS=Xt Xext X11
XLIBS=@X_LIBS@

# Define the .dev module that implements thread and synchronization
# primitives for this platform.

# If POSIX sync primitives are used, also change the STDLIBS to include
# the pthread library. Otherwise use SYNC=nosync
#SYNC=posync
#SYNC=nosync
SYNC=@SYNC@

# programs we use
RM=rm -f

# ------ Dynamic loader options ------- #
SOC_CFLAGS	=	@SOC_CFLAGS@
SOC_LIBS	=	@SOC_LIBS@
SOC_LOADER	=	@SOC_LOADER@

# on virtually every Unix-a-like system, this is "so",
# but Apple just had to be different, so it's now set
# by configure
SO_LIB_EXT=@SO_LIB_EXT@
DLL_EXT=@DLL_EXT@
SO_LIB_VERSION_SEPARATOR=@SO_LIB_VERSION_SEPARATOR@

#CAIRO_CFLAGS	=	@CAIRO_CFLAGS@
#CAIRO_LIBS	=	@CAIRO_LIBS@

# AUX Tools flags
MKROMFS_FLAGS=@MKROMFS_FLAGS@

# ------ Devices and features ------ #

# Choose the language feature(s) to include.  See gs.mak for details.

# if it's included, $(PSD)gs_pdfwr.dev should always be one of the last in the list
PSI_FEATURE_DEVS=$(PSD)psl3.dev $(PSD)pdf.dev $(PSD)epsf.dev $(PSD)ttfont.dev \
                 @UTF8DEVS@ $(PSD)fapi_ps.dev $(PSD)jpx.dev $(PSD)jbig2.dev $(PSD)gs_pdfwr.dev


PCL_FEATURE_DEVS=$(PLOBJDIR)/pl.dev $(PLOBJDIR)/pjl.dev $(PXLOBJDIR)/pxl.dev $(PCL5OBJDIR)/pcl5c.dev \
             $(PCL5OBJDIR)/hpgl2c.dev

XPS_FEATURE_DEVS=$(XPSOBJDIR)/pl.dev $(XPSOBJDIR)/xps.dev

FEATURE_DEVS=$(GLD)pipe.dev $(GLD)gsnogc.dev $(GLD)htxlib.dev $(GLD)psl3lib.dev $(GLD)psl2lib.dev \
             $(GLD)dps2lib.dev $(GLD)path1lib.dev $(GLD)patlib.dev $(GLD)psl2cs.dev $(GLD)rld.dev $(GLD)gxfapiu$(UFST_BRIDGE).dev\
             $(GLD)ttflib.dev  $(GLD)cielib.dev $(GLD)pipe.dev $(GLD)htxlib.dev $(GLD)sdct.dev $(GLD)libpng.dev\
	     $(GLD)seprlib.dev $(GLD)translib.dev $(GLD)cidlib.dev $(GLD)psf0lib.dev $(GLD)psf1lib.dev\
             $(GLD)psf2lib.dev $(GLD)lzwd.dev $(GLD)sicclib.dev \
             $(GLD)sjbig2.dev $(GLD)sjpx.dev $(GLD)ramfs.dev \
             $(GLD)pwgd.dev $(GLD)siscale.dev $(URF_DEV)

#FEATURE_DEVS=$(PSD)psl3.dev $(PSD)pdf.dev
#FEATURE_DEVS=$(PSD)psl3.dev $(PSD)pdf.dev $(PSD)ttfont.dev $(GLD)pipe.dev
# The following is strictly for testing.
FEATURE_DEVS_ALL=$(PSD)psl3.dev $(PSD)pdf.dev $(PSD)ttfont.dev $(PSD)double.dev $(PSD)trapping.dev $(PSD)stocht.dev $(GLD)pipe.dev $(GLD)gsnogc.dev $(GLD)htxlib.dev @JBIG2DEVS@ @JPXDEVS@ @UTF8DEVS@ $(GLD)ramfs.dev
#FEATURE_DEVS=$(FEATURE_DEVS_ALL)

# The list of resources to be included in the %rom% file system.
# This is in the top makefile since the file descriptors are platform specific
RESOURCE_LIST=Resource/CMap/ Resource/ColorSpace/ Resource/Decoding/ Resource/Font/ Resource/ProcSet/ Resource/IdiomSet/ Resource/CIDFont/

# Choose whether to store band lists on files or in memory.
# The choices are 'file' or 'memory'.

BAND_LIST_STORAGE=file

# Choose which compression method to use when storing band lists in memory.
# The choices are 'lzw' or 'zlib'.

BAND_LIST_COMPRESSOR=zlib

# Choose the implementation of file I/O: 'stdio', 'fd', or 'both'.
# See gs.mak and sfxfd.c for more details.

FILE_IMPLEMENTATION=stdio

# List of default devices, in order of priority. They need not be
# present in the actual build.
GS_DEV_DEFAULT="x11alpha bbox"

# Fallback default device.  This is set to 'display' by
# unix-dll.mak when building a shared object.
DISPLAY_DEV=$(DD)bbox.dev

# Choose the device(s) to include.  See devs.mak for details,
# devs.mak and contrib.mak for the list of available devices.

#DEVICE_DEVS=$(DISPLAY_DEV) $(DD)x11.dev $(DD)x11alpha.dev $(DD)x11cmyk.dev $(DD)x11gray2.dev $(DD)x11gray4.dev $(DD)x11mono.dev
#DEVICE_DEVS=$(DISPLAY_DEV) @X11DEVS@
#DEVICE_DEVS=$(DISPLAY_DEV) @X_DEVS@

#DEVICE_DEVS1=$(DD)bmpmono.dev $(DD)bmpgray.dev $(DD)bmpsep1.dev $(DD)bmpsep8.dev $(DD)bmp16.dev $(DD)bmp256.dev $(DD)bmp16m.dev $(DD)bmp32b.dev
#DEVICE_DEVS2=#$(DD)gdevjbig2.dev $(DD)gdevjpx.dev #$(DD)rinkj.dev
#DEVICE_DEVS3=$(DD)deskjet.dev $(DD)djet500.dev $(DD)laserjet.dev $(DD)ljetplus.dev $(DD)ljet2p.dev $(DD)ljet3.dev $(DD)ljet3d.dev $(DD)ljet4.dev $(DD)ljet4d.dev $(DD)lj5mono.dev $(DD)lj5gray.dev
#DEVICE_DEVS4=$(DD)cdeskjet.dev $(DD)cdjcolor.dev $(DD)cdjmono.dev $(DD)cdj550.dev $(DD)pj.dev $(DD)pjxl.dev $(DD)pjxl300.dev
#DEVICE_DEVS5=$(DD)uniprint.dev @IJSDEVS@
#DEVICE_DEVS6=$(DD)bj10e.dev $(DD)bj200.dev $(DD)bjc600.dev $(DD)bjc800.dev
#DEVICE_DEVS7=$(DD)faxg3.dev $(DD)faxg32d.dev $(DD)faxg4.dev $(DD)cfax.dev
#DEVICE_DEVS8=$(DD)pcxmono.dev $(DD)pcxgray.dev $(DD)pcx16.dev $(DD)pcx256.dev $(DD)pcx24b.dev $(DD)pcxcmyk.dev
#DEVICE_DEVS9=$(DD)pbm.dev $(DD)pbmraw.dev $(DD)pgm.dev $(DD)pgmraw.dev $(DD)pgnm.dev $(DD)pgnmraw.dev $(DD)pnm.dev $(DD)pnmraw.dev $(DD)ppm.dev $(DD)ppmraw.dev $(DD)pkm.dev $(DD)pkmraw.dev $(DD)pksm.dev $(DD)pksmraw.dev
#DEVICE_DEVS10=$(DD)tiffcrle.dev $(DD)tiffg3.dev $(DD)tiffg32d.dev $(DD)tiffg4.dev $(DD)tifflzw.dev $(DD)tiffpack.dev
#DEVICE_DEVS11=$(DD)tiff12nc.dev $(DD)tiff24nc.dev $(DD)tiff48nc.dev $(DD)tiffgray.dev $(DD)tiff32nc.dev $(DD)tiff64nc $(DD)tiffsep.dev $(DD)tiffsep1.dev
#DEVICE_DEVS12=$(DD)bit.dev $(DD)bitrgb.dev $(DD)bitcmyk.dev
#DEVICE_DEVS13=$(DD)pngmono.dev $(DD)pnggray.dev $(DD)png16.dev $(DD)png256.dev $(DD)png16m.dev
#DEVICE_DEVS13=@PNGDEVS@
#DEVICE_DEVS14=$(DD)jpeg.dev $(DD)jpeggray.dev
#DEVICE_DEVS15=$(DD)pdfwrite.dev $(DD)ps2write.dev $(DD)eps2write.dev $(DD)txtwrite.dev $(DD)pxlmono.dev $(DD)pxlcolor.dev
#DEVICE_DEVS16=$(DD)bbox.dev

#DEVICE_DEVS17=
#DEVICE_DEVS18=
#DEVICE_DEVS19=
#DEVICE_DEVS20=$(DD)cljet5.dev $(DD)cljet5c.dev
#DEVICE_DEVS21=$(DD)spotcmyk.dev $(DD)devicen.dev $(DD)xcf.dev $(DD)psdcmyk.dev $(DD)psdrgb.dev $(DD)psdcmykog.dev $(DD)fpng.dev
DEVICE_DEVS=$(DISPLAY_DEV) @X11_DEVS@
DEVICE_DEVS1=@F_DEVS@
DEVICE_DEVS2=@P_DEVS@
DEVICE_DEVS3=@CUPS_DEVS@
DEVICE_DEVS4=@IJS_DEVS@
DEVICE_DEVS5=
DEVICE_DEVS6=@PNG_DEVS@
DEVICE_DEVS7=@JBIG2_DEVS@
DEVICE_DEVS8=
DEVICE_DEVS9=@XPS_DEVS@
DEVICE_DEVS10=
DEVICE_DEVS11=
DEVICE_DEVS12=
DEVICE_DEVS13=
DEVICE_DEVS14=
DEVICE_DEVS15=
DEVICE_DEVS16=@OCR_DEVS@
DEVICE_DEVS17=
DEVICE_DEVS18=
DEVICE_DEVS19=
DEVICE_DEVS20=
DEVICE_DEVS21=


# Shared library target to build.
GS_SHARED_OBJS=@DYNAMIC_DEVS@

# ---------------------------- End of options --------------------------- #

# Define the name of the partial makefile that specifies options --
# used in dependencies.

MAKEFILE=Makefile
TOP_MAKEFILES=$(MAKEFILE) $(GLSRCDIR)/unixhead.mak

# for use in unix-dll.mak and unix-end.mak
# if you rename the Makefile, you *must* also set this to the new name
SUB_MAKE_OPTION=@SUB_MAKE_OPTION@

# Define the auxiliary program dependency. We don't use this.

AK=

# Define the compilation rules and flags.

CCFLAGS=$(GENOPT) $(CAPOPT) $(CFLAGS)
CC_=$(CC) $(CCFLAGS)
CC_LEAF=$(CC_)

CCFLAGSAUX=$(GENOPTAUX) $(CAPOPTAUX) $(CFLAGSAUX)
CCAUX_=$(CCAUX) $(CCFLAGSAUX)

# note gcc can't use -fomit-frame-pointer with -pg.
CC_LEAF_PG=$(CC_)
# These are the specific warnings we have to turn off to compile those
# specific few files that need this.  We may turn off others in the future.
CC_NO_WARN=$(CC_)
CCAUX_NO_WARN=$(CCAUX_)
CC_SHARED=$(CC_) @DYNAMIC_CFLAGS@

LD_SET_DT_SONAME=@SET_DT_SONAME@

# MAKEDIRS = the dependency on ALL object files (must be the last one on
# the line. Requires GNU make to make it an 'order only' dependency
# MAKEDIRSTOP = the topmost dependency - set this if you can't set MAKEDIRS

MAKEDIRS=@ORDER_ONLY@ directories
MAKEDIRSTOP=

OCR_VERSION=@OCR_VERSION@
LEPTONICADIR=@LEPTONICADIR@
TESSAVX=@TESS_AVX@
TESSAVX2=@TESS_AVX2@
TESSFMA=@TESS_FMA@
TESSSSE41=@TESS_SSE4_1@
TESSNEON=@TESS_NEON@
TESSCXXFLAGS=@TESS_CXXFLAGS@
TESSERACTDIR=@TESSERACTDIR@

# ---------------- End of platform-specific section ---------------- #

INSTALL_CONTRIB=@INSTALL_CONTRIB@
include $(GLSRCDIR)/unixhead.mak
include $(GLSRCDIR)/gs.mak
# *romfs.mak must precede lib.mak
include @PLROMFS_MAK@   # plromfs.mak
include @XPSROMFS_MAK@ # xpsromfs.mak

include $(PSSRCDIR)/psromfs.mak
include $(GLSRCDIR)/lib.mak
include $(PSSRCDIR)/int.mak

include @PL_MAK@ # pl.mak
include @PCL_MAK@ # pcl.mak
include @PCL_TOP_MAK@ # pcl_top.mak
include @PXL_MAK@ # pxl.mak

include @XPS_MAK@ # xps.mak

include @GPDL_MAK@ # gpdl.mak

include $(GLSRCDIR)/freetype.mak
include @FAPIUFST_MAK@
include $(GLSRCDIR)/jpeg.mak
# zlib.mak must precede png.mak
include $(GLSRCDIR)/zlib.mak
include $(GLSRCDIR)/png.mak
include $(GLSRCDIR)/tiff.mak
include $(GLSRCDIR)/jbig2.mak
include $(GLSRCDIR)/ldf_jb2.mak
include $(GLSRCDIR)/lwf_jp2.mak
include $(GLSRCDIR)/openjpeg.mak
include $(GLSRCDIR)/cal.mak
@LEPTONICAINCLUDE@
@TESSERACTINCLUDE@
include $(GLSRCDIR)/ocr.mak

include $(GLSRCDIR)/jpegxr.mak
include $(GLSRCDIR)/expat.mak

include $(GLSRCDIR)/$(WHICH_CMS).mak
include $(GLSRCDIR)/ijs.mak
@LCUPSINCLUDE@
@LCUPSIINCLUDE@
include $(DEVSRCDIR)/devs.mak
include $(DEVSRCDIR)/dcontrib.mak
include $(GLSRCDIR)/unix-aux.mak
include $(GLSRCDIR)/unixlink.mak
include $(GLSRCDIR)/unix-dll.mak
include $(GLSRCDIR)/unix-end.mak
include $(GLSRCDIR)/unixinst.mak
@CONTRIBINCLUDE@
@CUPSINCLUDE@

# Clean up after the autotools scripts
distclean : clean config-clean soclean pgclean debugclean mementoclean
	-$(RM_) -r $(BINDIR) $(GLOBJDIR) $(PSOBJDIR) $(AUXDIR)
	-$(RM_) -r autom4te.cache
	-$(RM_) config.log config.status configaux.log @ARCH_AUTOCONF_HEADER@
	-$(RM_) -r $(TIFFCONFDIR)
	-$(RM_) Makefile

# a debug-clean target for consistency with the ghostpdl builds
debug-clean : debugclean

memento-clean : mementoclean

maintainer-clean : distclean
	-$(RM_) configure

check : default
	$(NO_OP)