New Smarte Meter (B+G E-Tech DS100-00B)

[MauGon]

I have built a new Script for the B+G E-Tech DS100-00B Link

The Script is here:

>D
; Script for B+G E-Tech DS100-00B (Modbus Meter)
get4="1,010404UUuuUUuu@"
get2="1,010404UUuu@"
>B  
->sensor53 r
>M 1
; Rx on 4 and Tx on 1 Baudrate 115k check your Hardware and meter config 
+1,4,m,0,115200,DS100,1,1,01040400,01040402,01040404,01040410,01040412,01040414,0104041A,0104041C,0104041E,01040420,01040435,0104010E,01040118
1,=h<h2><center>DS100-00B</h2>
1,=h<hr/>
%get4%i0:1000,Voltage L1,V,Voltage_L1,2
%get4%i1:1000,Voltage L2,V,Voltage_L2,2
%get4%i2:1000,Voltage L3,V,Voltage_L3,2
%get4%i3:1000,Current L1,A,Current_L1,2
%get4%i4:1000,Current L2,A,Current_L2,2
%get4%i5:1000,Current L3,A,Current_L3,2
%get4%i6:1,Power L1,W,Power_L1,0
%get4%i7:1,Power L2,W,Power_L2,0
%get4%i8:1,Power L3,W,Power_L3,0
; Power will be send every second because of the 16
%get4%i9:1,Power,W,Power,16
%get2%i10:10,Frequency,Hz,Frequency,1
1,=h<hr/>
%get4%i11:100,Total In,kWh,Total_In,2
%get4%i12:100,Total Out,kWh,Total_Out,2
#

Is it possible to add it to the Tasmota dokumentation?