Compiling OOT
You must get that on your own and please do not ask for that in the discord due to discord's TOS.
You can compare the MD5 at the site below.
https://www.romhacking.net/hash/
PAL 1.0 MD5
9526b263b60577d8ed22fb7a33c2facd
EUR MQD MD5
f0b7f35375f9cc8ca1b2d59d78e35405
MattsCreative has a great videos and tutorial on how to compile this project Below:
Compiling The dev branch for 30FPS - 60FPS and 120FPS
Go here https://github.com/nitrostemp/OOOT-HELPER-GUI/releases/
Grab the newest release and unzip it.
Place Your rom next to the OOOT GUI.exe
next run OOOT GUI.exe as Admin
click Install tools , clone and compile
And enjoy the ride.
Step one install all required Programs below
Python 3.10 Add to path during the install
Git Choose x64 Build and Use the git bash to clone the repo and to run setup.py
Visual Studio Community 2019 During setup click C++ development
Visual Studio 2019+ is the only currently supported build environment, and only the 32-bit X86/WIN32 build
You must use the ZAPD that is included with this repository, and not the main branch as it is modified.
Step 2 Follow what is below!
If you are using the EUR PAL 1.0 retail rom,
make sure baserom_original.z64 or baserom_original.n64 is inside the correct folder as shown below:
\ooot\roms\PAL_1.0\
iF the roms hash is not correct it won't extract the assets and continue.
PAL 1.0 MD5 9526b263b60577d8ed22fb7a33c2facd
Open git Bash or command prompt and type:
git clone --recursive https://github.com/blawar/ooot.git
after it's done type cd ooot
run this command next to extract the assets from the rom. (baserom_original.z64 must exist in the directory \ooot\roms\PAL_1.0\)
python setup.py -b PAL_1.0
if you are using the EUR Master Quest Debug rom.
make sure baserom_original.z64 or baserom_original.n64 is inside the correct folder as shown below:
\ooot\roms\EUR_MQD\
if the roms hash is not correct it won't extract the assets and continue.
EUR MQD MD5 f0b7f35375f9cc8ca1b2d59d78e35405
Open git Bash or command prompt and type:
git clone --recursive https://github.com/blawar/ooot.git
after it's done type cd ooot
run this command next to extract the assets from the rom. (baserom_original.z64 must exist in the directory \ooot\roms\EUR_MQD\)
python setup.py -b EUR_MQD
Open OOT.sln, you will find this in \ooot\vs
make sure Debug - Win32** or **Release - Win32 is selected, then hit build.
Once the build completes, press F5 to start it if you are testing code but if you are compiling to play right click oot on the side and click build.
git checkout dev
git pull origin dev
git submodule update --init --recursive
python setup.py -b PAL_1.0
open git bash type:
cd ooot
git pull
python setup.py -b PAL_1.0
python setup.py -b EUR_MQD
and Open OOT.sln, you will find this in \ooot\vs make sure Debug - Win32** or **Release - Win32 is selected, then hit build.
Not currently supported, however a makefile and porting of GLideN64 would allow this and a PR is welcome.
Linux does not currently work. The below steps are for development purposes.
Debian/Ubuntu
sudo apt install gcc-multilib g++-multilib
sudo apt install libsdl2-dev
sudo apt install libpng-dev
sudo apt install python3
sudo apt install python3-pip
sudo apt install meson
Arch Linux
edit /etc/pacman.conf annd go to the bottom uncomment multilib so remove the # do not touch testing.
sudo pacman -S gcc lib32-gcc-libs
sudo pacman -S sdl2 lib32-sdl2
sudo pacman -S meson
sudo pacman -S python-pip
sudo pacman -S libpng
Fedora Linux
sudo dnf in gcc
sudo dnf in sdl2-devel
sudo dnf in meson
sudo dnf in python3-pip
sudo dnf in libpng
setup.py -b EUR_MQD
meson setup linux
cd linux
ninja