diff --git a/.gitignore b/.gitignore
new file mode 100644
index 000000000000..3dd096eda03b
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1 @@
+setup.conf
\ No newline at end of file
diff --git a/setup.sh b/setup.sh
index 6e3a360e69da..70deb95e4767 100644
--- a/setup.sh
+++ b/setup.sh
@@ -3,6 +3,19 @@
 LX_BASE=""
 LX_VERSION=""
 
+if [ -e setup.conf ]; then
+	echo "Saved configuration:"
+	cat ./setup.conf
+	echo ""
+	read -rp "Do you want to use this configuration? (type yes or no) " setupconfig;echo
+	if [ "$setupconfig" = "yes" ]; then
+		echo "Loading config from setup.conf"
+		. ./setup.conf
+	else
+		echo "Not loading setup.conf. Will prompt user."
+	fi
+fi
+
 if [ -r /etc/os-release ]; then
     . /etc/os-release
 	if [ $ID = arch ]; then
@@ -31,13 +44,34 @@ read -rp "Press enter if this is correct, or CTRL-C to cancel." cont;echo
 
 echo "\nContinuing setup...\n"
 
-echo "Coping the config files under root to where they belong...\n"
-cp -Rb root/* /
 
-echo "Making /lib/systemd/system-sleep/sleep executable...\n"
-chmod a+x /lib/systemd/system-sleep/sleep
+if [ -z "${copyroot}" ]; then
+	read -rp "Do you want to copy config files under root? (type yes or no) " copyroot;echo
+fi
+
+if [ "$copyroot" = "yes" ]; then
+	echo "Copying the config files under root to where they belong...\n"
+	cp -Rb root/* /
+else
+	echo "Not touching config files\n"
+fi
+
+
+if [ -z "${sleepexecutable}" ]; then
+	read -rp "Do you want to make sleep executable? (type yes or no) " sleepexecutable;echo
+fi
+
+if [ "$sleepexecutable" = "yes" ]; then
+	echo "Making /lib/systemd/system-sleep/sleep executable...\n"
+	chmod a+x /lib/systemd/system-sleep/sleep
+else
+	echo "Not touching sleep executable\n"
+fi
+
 
-read -rp "Do you want to replace suspend with hibernate? (type yes or no) " usehibernate;echo
+if [ -z "${usehibernate}" ]; then
+	read -rp "Do you want to replace suspend with hibernate? (type yes or no) " usehibernate;echo
+fi
 
 if [ "$usehibernate" = "yes" ]; then
 	if [ "$LX_BASE" = "ubuntu" ] && [ 1 -eq "$(echo "${LX_VERSION} >= 17.10" | bc)" ]; then
@@ -51,26 +85,33 @@ else
 	echo "Not touching Suspend\n"
 fi
 
-read -rp "Do you want use the patched libwacom packages? (type yes or no) " uselibwacom;echo
+
+if [ -z "${uselibwacom}" ]; then
+	read -rp "Do you want use the patched libwacom packages? (type yes or no) " uselibwacom;echo
+fi
 
 if [ "$uselibwacom" = "yes" ]; then
-	echo "Installing patched libwacom packages..."
+	echo "Installing patched libwacom packages...\n"
 		dpkg -i packages/libwacom/*.deb
 		apt-mark hold libwacom
 else
-	echo "Not touching libwacom"
+	echo "Not touching libwacom\n"
 fi
 
-read -rp "Do you want to remove the example intel xorg config? (type yes or no) " removexorg;echo
+if [ -z "${removexorg}" ]; then
+	read -rp "Do you want to remove the example intel xorg config? (type yes or no) " removexorg;echo
+fi
 
 if [ "$removexorg" = "yes" ]; then
-	echo "Removing the example intel xorg config..."
+	echo "Removing the example intel xorg config...\n"
 		rm /etc/X11/xorg.conf.d/20-intel_example.conf
 else
-	echo "Not touching example intel xorg config (/etc/X11/xorg.conf.d/20-intel_example.conf)"
+	echo "Not touching example intel xorg config (/etc/X11/xorg.conf.d/20-intel_example.conf)\n"
 fi
 
-read -rp "Do you want to remove the example pulse audio config files? (type yes or no) " removepulse;echo
+if [ -z "${removepulse}" ]; then
+	read -rp "Do you want to remove the example pulse audio config files? (type yes or no) " removepulse;echo
+fi
 
 if [ "$removepulse" = "yes" ]; then
 	echo "Removing the example pulse audio config files..."
@@ -80,127 +121,156 @@ else
 	echo "Not touching example pulse audio config files (/etc/pulse/*_example.*)"
 fi
 
-if [ "$SUR_MODEL" = "Surface Pro 3" ]; then
-	echo "\nInstalling i915 firmware for Surface Pro 3...\n"
-	mkdir -p /lib/firmware/i915
-	unzip -o firmware/i915_firmware_bxt.zip -d /lib/firmware/i915/
-
-	echo "\nRemove unneeded udev rules for Surface Pro 3...\n"
-	rm /etc/udev/rules.d/98-keyboardscovers.rules
+if [ -z "${iptsfirmware}" ]; then
+	read -rp "Do you want to install the IPTS and i915 firmware? (type yes or no) " iptsfirmware;echo
 fi
 
-if [ "$SUR_MODEL" = "Surface Pro" ]; then
-	echo "\nInstalling IPTS firmware for Surface Pro 2017...\n"
-	mkdir -p /lib/firmware/intel/ipts
-	unzip -o firmware/ipts_firmware_v102.zip -d /lib/firmware/intel/ipts/
+if [ "$iptsfirmware" = "yes" ]; then
+	if [ "$SUR_MODEL" = "Surface Pro 3" ]; then
+		echo "\nInstalling i915 firmware for Surface Pro 3...\n"
+		mkdir -p /lib/firmware/i915
+		unzip -o firmware/i915_firmware_bxt.zip -d /lib/firmware/i915/
 
-	echo "\nInstalling i915 firmware for Surface Pro 2017...\n"
-	mkdir -p /lib/firmware/i915
-	unzip -o firmware/i915_firmware_kbl.zip -d /lib/firmware/i915/
-fi
+		echo "\nRemove unneeded udev rules for Surface Pro 3...\n"
+		rm /etc/udev/rules.d/98-keyboardscovers.rules
+	fi
 
-if [ "$SUR_MODEL" = "Surface Pro 4" ]; then
-	echo "\nInstalling IPTS firmware for Surface Pro 4...\n"
-	mkdir -p /lib/firmware/intel/ipts
-	unzip -o firmware/ipts_firmware_v78.zip -d /lib/firmware/intel/ipts/
+	if [ "$SUR_MODEL" = "Surface Pro" ]; then
+		echo "\nInstalling IPTS firmware for Surface Pro 2017...\n"
+		mkdir -p /lib/firmware/intel/ipts
+		unzip -o firmware/ipts_firmware_v102.zip -d /lib/firmware/intel/ipts/
 
-	echo "\nInstalling i915 firmware for Surface Pro 4...\n"
-	mkdir -p /lib/firmware/i915
-	unzip -o firmware/i915_firmware_skl.zip -d /lib/firmware/i915/
-fi
+		echo "\nInstalling i915 firmware for Surface Pro 2017...\n"
+		mkdir -p /lib/firmware/i915
+		unzip -o firmware/i915_firmware_kbl.zip -d /lib/firmware/i915/
+	fi
 
-if [ "$SUR_MODEL" = "Surface Pro 2017" ]; then
-	echo "\nInstalling IPTS firmware for Surface Pro 2017...\n"
-	mkdir -p /lib/firmware/intel/ipts
-	unzip -o firmware/ipts_firmware_v102.zip -d /lib/firmware/intel/ipts/
+	if [ "$SUR_MODEL" = "Surface Pro 4" ]; then
+		echo "\nInstalling IPTS firmware for Surface Pro 4...\n"
+		mkdir -p /lib/firmware/intel/ipts
+		unzip -o firmware/ipts_firmware_v78.zip -d /lib/firmware/intel/ipts/
 
-	echo "\nInstalling i915 firmware for Surface Pro 2017...\n"
-	mkdir -p /lib/firmware/i915
-	unzip -o firmware/i915_firmware_kbl.zip -d /lib/firmware/i915/
-fi
+		echo "\nInstalling i915 firmware for Surface Pro 4...\n"
+		mkdir -p /lib/firmware/i915
+		unzip -o firmware/i915_firmware_skl.zip -d /lib/firmware/i915/
+	fi
 
-if [ "$SUR_MODEL" = "Surface Pro 6" ]; then
-	echo "\nInstalling IPTS firmware for Surface Pro 6...\n"
-	mkdir -p /lib/firmware/intel/ipts
-	unzip -o firmware/ipts_firmware_v102.zip -d /lib/firmware/intel/ipts/
+	if [ "$SUR_MODEL" = "Surface Pro 2017" ]; then
+		echo "\nInstalling IPTS firmware for Surface Pro 2017...\n"
+		mkdir -p /lib/firmware/intel/ipts
+		unzip -o firmware/ipts_firmware_v102.zip -d /lib/firmware/intel/ipts/
 
-	echo "\nInstalling i915 firmware for Surface Pro 6...\n"
-	mkdir -p /lib/firmware/i915
-	unzip -o firmware/i915_firmware_kbl.zip -d /lib/firmware/i915/
-fi
+		echo "\nInstalling i915 firmware for Surface Pro 2017...\n"
+		mkdir -p /lib/firmware/i915
+		unzip -o firmware/i915_firmware_kbl.zip -d /lib/firmware/i915/
+	fi
 
-if [ "$SUR_MODEL" = "Surface Laptop" ]; then
-	echo "\nInstalling IPTS firmware for Surface Laptop...\n"
-	mkdir -p /lib/firmware/intel/ipts
-	unzip -o firmware/ipts_firmware_v79.zip -d /lib/firmware/intel/ipts/
+	if [ "$SUR_MODEL" = "Surface Pro 6" ]; then
+		echo "\nInstalling IPTS firmware for Surface Pro 6...\n"
+		mkdir -p /lib/firmware/intel/ipts
+		unzip -o firmware/ipts_firmware_v102.zip -d /lib/firmware/intel/ipts/
 
-	echo "\nInstalling i915 firmware for Surface Laptop...\n"
-	mkdir -p /lib/firmware/i915
-	unzip -o firmware/i915_firmware_kbl.zip -d /lib/firmware/i915/
-fi
+		echo "\nInstalling i915 firmware for Surface Pro 6...\n"
+		mkdir -p /lib/firmware/i915
+		unzip -o firmware/i915_firmware_kbl.zip -d /lib/firmware/i915/
+	fi
 
-if [ "$SUR_MODEL" = "Surface Laptop 2" ]; then
-	echo "\nInstalling IPTS firmware for Surface Laptop 2...\n"
-	mkdir -p /lib/firmware/intel/ipts
-	unzip -o firmware/ipts_firmware_v79.zip -d /lib/firmware/intel/ipts/
+	if [ "$SUR_MODEL" = "Surface Laptop" ]; then
+		echo "\nInstalling IPTS firmware for Surface Laptop...\n"
+		mkdir -p /lib/firmware/intel/ipts
+		unzip -o firmware/ipts_firmware_v79.zip -d /lib/firmware/intel/ipts/
 
-	echo "\nInstalling i915 firmware for Surface Laptop 2...\n"
-	mkdir -p /lib/firmware/i915
-	unzip -o firmware/i915_firmware_kbl.zip -d /lib/firmware/i915/
-fi
+		echo "\nInstalling i915 firmware for Surface Laptop...\n"
+		mkdir -p /lib/firmware/i915
+		unzip -o firmware/i915_firmware_kbl.zip -d /lib/firmware/i915/
+	fi
 
-if [ "$SUR_MODEL" = "Surface Book" ]; then
-	echo "\nInstalling IPTS firmware for Surface Book...\n"
-	mkdir -p /lib/firmware/intel/ipts
-	unzip -o firmware/ipts_firmware_v76.zip -d /lib/firmware/intel/ipts/
+	if [ "$SUR_MODEL" = "Surface Laptop 2" ]; then
+		echo "\nInstalling IPTS firmware for Surface Laptop 2...\n"
+		mkdir -p /lib/firmware/intel/ipts
+		unzip -o firmware/ipts_firmware_v79.zip -d /lib/firmware/intel/ipts/
 
-	echo "\nInstalling i915 firmware for Surface Book...\n"
-	mkdir -p /lib/firmware/i915
-	unzip -o firmware/i915_firmware_skl.zip -d /lib/firmware/i915/
-fi
+		echo "\nInstalling i915 firmware for Surface Laptop 2...\n"
+		mkdir -p /lib/firmware/i915
+		unzip -o firmware/i915_firmware_kbl.zip -d /lib/firmware/i915/
+	fi
 
-if [ "$SUR_MODEL" = "Surface Book 2" ]; then
-	echo "\nInstalling IPTS firmware for Surface Book 2...\n"
-	mkdir -p /lib/firmware/intel/ipts
-	if [ "$SUR_SKU" = "Surface_Book_1793" ]; then
-		unzip -o firmware/ipts_firmware_v101.zip -d /lib/firmware/intel/ipts/
-	else
-		unzip -o firmware/ipts_firmware_v137.zip -d /lib/firmware/intel/ipts/
+	if [ "$SUR_MODEL" = "Surface Book" ]; then
+		echo "\nInstalling IPTS firmware for Surface Book...\n"
+		mkdir -p /lib/firmware/intel/ipts
+		unzip -o firmware/ipts_firmware_v76.zip -d /lib/firmware/intel/ipts/
+
+		echo "\nInstalling i915 firmware for Surface Book...\n"
+		mkdir -p /lib/firmware/i915
+		unzip -o firmware/i915_firmware_skl.zip -d /lib/firmware/i915/
 	fi
 
-	echo "\nInstalling i915 firmware for Surface Book 2...\n"
-	mkdir -p /lib/firmware/i915
-	unzip -o firmware/i915_firmware_kbl.zip -d /lib/firmware/i915/
+	if [ "$SUR_MODEL" = "Surface Book 2" ]; then
+		echo "\nInstalling IPTS firmware for Surface Book 2...\n"
+		mkdir -p /lib/firmware/intel/ipts
+		if [ "$SUR_SKU" = "Surface_Book_1793" ]; then
+			unzip -o firmware/ipts_firmware_v101.zip -d /lib/firmware/intel/ipts/
+		else
+			unzip -o firmware/ipts_firmware_v137.zip -d /lib/firmware/intel/ipts/
+		fi
+
+		echo "\nInstalling i915 firmware for Surface Book 2...\n"
+		mkdir -p /lib/firmware/i915
+		unzip -o firmware/i915_firmware_kbl.zip -d /lib/firmware/i915/
+
+		echo "\nInstalling nvidia firmware for Surface Book 2...\n"
+		mkdir -p /lib/firmware/nvidia/gp108
+		unzip -o firmware/nvidia_firmware_gp108.zip -d /lib/firmware/nvidia/gp108/
+		mkdir -p /lib/firmware/nvidia/gv100
+		unzip -o firmware/nvidia_firmware_gv100.zip -d /lib/firmware/nvidia/gv100/
+	fi
 
-	echo "\nInstalling nvidia firmware for Surface Book 2...\n"
-	mkdir -p /lib/firmware/nvidia/gp108
-	unzip -o firmware/nvidia_firmware_gp108.zip -d /lib/firmware/nvidia/gp108/
-	mkdir -p /lib/firmware/nvidia/gv100
-	unzip -o firmware/nvidia_firmware_gv100.zip -d /lib/firmware/nvidia/gv100/
+	if [ "$SUR_MODEL" = "Surface Go" ]; then
+		echo "\nInstalling ath10k firmware for Surface Go...\n"
+		mkdir -p /lib/firmware/ath10k
+		unzip -o firmware/ath10k_firmware.zip -d /lib/firmware/ath10k/
+
+		if [ ! -f "/etc/init.d/surfacego-touchscreen" ]; then
+			echo "\nPatching power control for Surface Go touchscreen...\n"
+			echo "echo \"on\" > /sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/power/control" > /etc/init.d/surfacego-touchscreen
+			chmod 755 /etc/init.d/surfacego-touchscreen
+			update-rc.d surfacego-touchscreen defaults
+		fi
+	fi
+else
+	echo "Not touching IPTS and i915 firmware\n"
 fi
 
-if [ "$SUR_MODEL" = "Surface Go" ]; then
-	echo "\nInstalling ath10k firmware for Surface Go...\n"
-	mkdir -p /lib/firmware/ath10k
-	unzip -o firmware/ath10k_firmware.zip -d /lib/firmware/ath10k/
 
-	if [ ! -f "/etc/init.d/surfacego-touchscreen" ]; then
-		echo "\nPatching power control for Surface Go touchscreen...\n"
-		echo "echo \"on\" > /sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/power/control" > /etc/init.d/surfacego-touchscreen
-		chmod 755 /etc/init.d/surfacego-touchscreen
-		update-rc.d surfacego-touchscreen defaults
-	fi
+if [ -z "${marvellfirmware}" ]; then
+	read -rp "Do you want to install the marvell firmware? (type yes or no) " marvellfirmware;echo
+fi
+
+if [ "$marvellfirmware" = "yes" ]; then
+	echo "Installing marvell firmware...\n"
+	mkdir -p /lib/firmware/mrvl/
+	unzip -o firmware/mrvl_firmware.zip -d /lib/firmware/mrvl/
+else
+	echo "Not touching marvell firmware\n"
 fi
 
-echo "Installing marvell firmware...\n"
-mkdir -p /lib/firmware/mrvl/
-unzip -o firmware/mrvl_firmware.zip -d /lib/firmware/mrvl/
 
-echo "Installing mwlwifi firmware...\n"
-mkdir -p /lib/firmware/mwlwifi/
-unzip -o firmware/mwlwifi_firmware.zip -d /lib/firmware/mwlwifi/
+if [ -z "${mwlwifi}" ]; then
+	read -rp "Do you want to install the mwlwifi firmware? (type yes or no) " mwlwifi;echo
+fi
 
-read -rp "Do you want to set your clock to local time instead of UTC? This fixes issues when dual booting with Windows. (type yes or no) " uselocaltime;echo
+if [ "$mwlwifi" = "yes" ]; then
+	echo "Installing mwlwifi firmware...\n"
+	mkdir -p /lib/firmware/mwlwifi/
+	unzip -o firmware/mwlwifi_firmware.zip -d /lib/firmware/mwlwifi/
+else
+	echo "Not touching mwlwifi firmware\n"
+fi
+
+
+if [ -z "${uselocaltime}" ]; then
+	read -rp "Do you want to set your clock to local time instead of UTC? This fixes issues when dual booting with Windows. (type yes or no) " uselocaltime;echo
+fi
 
 if [ "$uselocaltime" = "yes" ]; then
 	echo "Setting clock to local time...\n"
@@ -208,24 +278,69 @@ if [ "$uselocaltime" = "yes" ]; then
 	timedatectl set-local-rtc 1
 	hwclock --systohc --localtime
 else
-	echo "Not setting clock"
+	echo "Not setting clock\n"
 fi
 
-read -rp "Do you want this script to download and install the latest kernel for you? (type yes or no) " autoinstallkernel;echo
+
+if [ -z "${autoinstallkernel}" ]; then
+	read -rp "Do you want this script to download and install the latest kernel for you? (type yes or no) " autoinstallkernel;echo
+fi
 
 if [ "$autoinstallkernel" = "yes" ]; then
-	echo "Downloading latest kernel...\n"
 
-	urls=$(curl --silent "https://api.github.com/repos/jakeday/linux-surface/releases/latest" | grep '"browser_download_url":' | sed -E 's/.*"([^"]+)".*/\1/')
+	json=$(curl --silent "https://api.github.com/repos/jakeday/linux-surface/releases/latest")
+	if [ -e /usr/bin/jq ]
+	then
+		echo "Checking if the latest kernel version is already installed.\n"
+		LATESTKERNELVERSION=$(echo $json | jq .tag_name | cut -d '-' -f1 | tr -d '"')
+		LATESTKERNELVERSIONINSTALLED=$(dpkg -l | grep linux-image-$LATESTKERNELVERSION)
+		if [ $? = "0" ]; then
+			read -rp "Latest kernel version is already installed. Do you want to redownload and reinstall the latest kernel? (type yes or no) " INSTALLKERNEL;echo
+		else
+			echo "Latest kernel version is not installed, will download.\n"
+			INSTALLKERNEL='yes'
+		fi
+	else
+		INSTALLKERNEL="yes"	
+	fi
+
+	if [ "$INSTALLKERNEL" = "yes" ]; then
+		echo "Downloading latest kernel...\n"
 
-	resp=$(wget -P tmp $urls)
+		urls=$(curl --silent "https://api.github.com/repos/jakeday/linux-surface/releases/latest" | grep '"browser_download_url":' | sed -E 's/.*"([^"]+)".*/\1/')
+		resp=$(wget -P tmp $urls)
 
-	echo "Installing latest kernel...\n"
+		echo "Installing latest kernel...\n"
 
-	dpkg -i tmp/*.deb
-	rm -rf tmp
+		dpkg -i tmp/*.deb
+		rm -rf tmp
+		echo
+	else
+		echo "Not redownloading latest kernel\n"
+	fi
 else
-	echo "Not downloading latest kernel"
+	echo "Not downloading latest kernel\n"
+fi
+
+
+if [ "$setupconfig" = "no" ]; then
+	read -rp "Do you want to save your answers to setup.conf? (type yes or no) " saveconfig;echo
+	if [ "$saveconfig" = "yes" ]; then
+		echo "Saving answers to setup.conf\n"
+		echo "copyroot=$copyroot" > setup.conf
+		echo "sleepexecutable=$sleepexecutable" >> setup.conf
+		echo "usehibernate=$usehibernate" >> setup.conf
+		echo "uselibwacom=$uselibwacom" >> setup.conf
+		echo "removexorg=$removexorg" >> setup.conf
+		echo "iptsfirmware=$iptsfirmware" >> setup.conf
+		echo "marvellfirmware=$marvellfirmware" >> setup.conf
+		echo "uselocaltime=$uselocaltime" >> setup.conf
+		echo "autoinstallkernel=$autoinstallkernel" >> setup.conf
+		echo "removepulse=$removepulse" >> setup.conf
+		echo "mwlwifi=$mwlwifi" >> setup.conf
+	else
+		echo "Not saving answers.\n"
+	fi
 fi
 
-echo "\nAll done! Please reboot."
+echo "All done! Please reboot."