No Wifi Connection after power outage

[protege323]

The Problem

Hi,

The problem I have is that after installing the ESP32 via Web Installer it basically works, but when I unplug the ESP32 and then plug it in again, no WLAN connection is established.

I have to connect and disconnect the ESP32 twice on the PC and then I can only connect via COM port and call up logs & console via the Web Installer and via the “Reset Device” button first the config is landed and then the connection via WIFI is established.

What can I do to achieve that after a power outage the config will be loaded and a wifi connection will be established

Version

Release: v16.0.0-RC5 (Commit: 7836323+)

Logfile

Reload Show Full Log Show Older Log Files

[0d00h00m10s] 2025-01-02T09:31:39 <INF> [SNTP] ==================== Start ======================
[0d00h00m10s] 2025-01-02T09:31:39 <INF> [SNTP] == Logs before time sync -> log_1970-01-01.txt ==
[0d00h00m10s] 2025-01-02T09:31:39 <INF> [SNTP] Time is synced with NTP Server pool.ntp.org: 2025-01-02 09:31:39
[0d00h00m11s] 2025-01-02T09:31:39 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 301
[0d00h00m11s] 2025-01-02T09:31:39 <INF> [MAIN] SD card info: Name: ASTC, Capacity: 15360MB, Free: 15343MB
[0d00h00m13s] 2025-01-02T09:31:41 <INF> [MAIN] Initialization completed successfully
[0d00h00m15s] 2025-01-02T09:31:43 <INF> [LOGFILE] Set log level to ERROR
[0d00h00m16s] 2025-01-02T09:31:44 <ERR> [MQTT IF] Connection refused, not authorized. Check username/password (0x05)
[0d00h00m39s] 2025-01-02T09:32:07 <ERR> [MQTT IF] Connection refused, not authorized. Check username/password (0x05)
[0d00h00m58s] 2025-01-02T09:32:26 <ERR> [POSTPROC] main: Raw: 45554.6594, Value: , Status: Rate too high - Read: 45554.6594 - Pre: 42.0134 - Rate: 45512.6460
[0d00h01m02s] 2025-01-02T09:32:30 <ERR> [MQTT IF] Connection refused, not authorized. Check username/password (0x05)
[0d00h01m24s] 2025-01-02T09:32:52 <ERR> [MQTT IF] Connection refused, not authorized. Check username/password (0x05)
[0d00h01m47s] 2025-01-02T09:33:15 <ERR> [MQTT IF] Connection refused, not authorized. Check username/password (0x05)
[0d00h01m47s] 2025-01-02T09:33:15 <ERR> [MQTT IF] Disconnected, multiple reconnect attempts failed, still retrying...
[0d00h02m02s] 2025-01-02T09:33:30 <ERR> [MQTT IF] Connection refused, not authorized. Check username/password (0x05)
[0d00h02m24s] 2025-01-02T09:33:53 <ERR> [MQTT IF] Connection refused, not authorized. Check username/password (0x05)
[0d00h02m47s] 2025-01-02T09:34:15 <ERR> [MQTT IF] Connection refused, not authorized. Check username/password (0x05)
[0d00h03m09s] 2025-01-02T09:34:38 <ERR> [MQTT IF] Connection refused, not authorized. Check username/password (0x05)
[0d00h03m32s] 2025-01-02T09:35:00 <ERR> [MQTT IF] Connection refused, not authorized. Check username/password (0x05)
[0d00h03m32s] 2025-01-02T09:35:00 <ERR> [MQTT IF] Disconnected, multiple reconnect attempts failed, still retrying...
[0d00h03m47s] 2025-01-02T09:35:15 <ERR> [MQTT IF] Connection refused, not authorized. Check username/password (0x05)
[0d00h00m00s] 2025-01-02T08:35:43 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-01-02T08:35:43 <INF> [MAIN] ==================== Start ======================
[0d00h00m00s] 2025-01-02T08:35:43 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-01-02T08:35:43 <INF> [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2025-01-02T08:35:43 <INF> [MAIN] Total heap: 4380199 byte
[0d00h00m04s] 2025-01-02T08:35:47 <INF> [MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m04s] 2025-01-02T08:35:47 <INF> [SDCARD] Basic R/W check started...
[0d00h00m04s] 2025-01-02T08:35:47 <INF> [SDCARD] Basic R/W check successful
[0d00h00m04s] 2025-01-02T08:35:47 <INF> [SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m04s] 2025-01-02T08:35:47 <INF> [SNTP] Configuring NTP Client...
[0d00h00m04s] 2025-01-02T09:35:47 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m04s] 2025-01-02T09:35:47 <INF> [SNTP] time zone: +0100 Delta to UTC: 3600 seconds
[0d00h00m04s] 2025-01-02T09:35:47 <INF> [SNTP] Time is already set: 2025-01-02 09:35:47
[0d00h00m04s] 2025-01-02T09:35:47 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m05s] 2025-01-02T09:35:48 <INF> [SDCARD] Folder/file presence check started...
[0d00h00m05s] 2025-01-02T09:35:48 <INF> [SDCARD] Folder/file presence check successful
[0d00h00m05s] 2025-01-02T09:35:48 <INF> [MAIN] Tag: 'v15.7.0', Release: v15.7.0 (Commit: 0d0b018+), Date/Time: 2024-02-17 00:15, Web UI: Release: v15.7.0 (Commit: 0d0b018+)
[0d00h00m05s] 2025-01-02T09:35:48 <INF> [MAIN] Reset reason: Via esp_restart
[0d00h00m05s] 2025-01-02T09:35:48 <INF> [WLANINI] SSID: Wifi_Ubi
[0d00h00m05s] 2025-01-02T09:35:48 <INF> [WLANINI] Password: XXXXXXXX
[0d00h00m05s] 2025-01-02T09:35:48 <INF> [WLANINI] RSSIThreshold: -75
[0d00h00m05s] 2025-01-02T09:35:48 <INF> [MAIN] WLAN config loaded, init WIFI...
[0d00h00m05s] 2025-01-02T09:35:48 <INF> [WIFI] Automatic interface config --> Use DHCP service
[0d00h00m05s] 2025-01-02T09:35:48 <INF> [WIFI] Set hostname to: watermeter
[0d00h00m05s] 2025-01-02T09:35:48 <INF> [WIFI] Init successful
[0d00h00m08s] 2025-01-02T09:35:51 <INF> [WIFI] Connected to: Wifi_Ubi, RSSI: -38
[0d00h00m09s] 2025-01-02T09:35:52 <INF> [WIFI] Assigned IP: 192.168.1.103
[0d00h00m09s] 2025-01-02T09:35:52 <INF> [SNTP] Time is synced with NTP Server pool.ntp.org: 2025-01-02 09:35:52
[0d00h00m09s] 2025-01-02T09:35:52 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 301
[0d00h00m09s] 2025-01-02T09:35:52 <INF> [MAIN] SD card info: Name: ASTC, Capacity: 15360MB, Free: 15343MB
[0d00h00m11s] 2025-01-02T09:35:54 <INF> [MAIN] Initialization completed successfully
[0d00h00m13s] 2025-01-02T09:35:56 <INF> [LOGFILE] Set log level to ERROR
[0d00h00m10s] 2025-01-02T09:36:49 <INF> [SNTP] =================================================
[0d00h00m10s] 2025-01-02T09:36:49 <INF> [SNTP] ==================== Start ======================
[0d00h00m10s] 2025-01-02T09:36:49 <INF> [SNTP] == Logs before time sync -> log_1970-01-01.txt ==
[0d00h00m10s] 2025-01-02T09:36:49 <INF> [SNTP] Time is synced with NTP Server pool.ntp.org: 2025-01-02 09:36:49
[0d00h00m11s] 2025-01-02T09:36:49 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 301
[0d00h00m11s] 2025-01-02T09:36:49 <INF> [MAIN] SD card info: Name: ASTC, Capacity: 15360MB, Free: 15343MB
[0d00h00m13s] 2025-01-02T09:36:51 <INF> [MAIN] Initialization completed successfully
[0d00h00m15s] 2025-01-02T09:36:53 <INF> [LOGFILE] Set log level to ERROR
[0d00h00m57s] 2025-01-02T09:37:36 <ERR> [POSTPROC] main: Raw: 4N554.7673, Value: , Status: Rate too high - Read: 40554.7673 - Pre: 42.0134 - Rate: 40512.7539
[0d00h05m57s] 2025-01-02T09:42:35 <ERR> [POSTPROC] main: Raw: N5554.6593, Value: , Status: Rate too high - Read: 5554.6593 - Pre: 42.0134 - Rate: 5512.6459
[0d00h00m09s] 2025-01-02T09:55:52 <INF> [SNTP] =================================================
[0d00h00m09s] 2025-01-02T09:55:52 <INF> [SNTP] ==================== Start ======================
[0d00h00m09s] 2025-01-02T09:55:52 <INF> [SNTP] == Logs before time sync -> log_1970-01-01.txt ==
[0d00h00m09s] 2025-01-02T09:55:52 <INF> [SNTP] Time is synced with NTP Server pool.ntp.org: 2025-01-02 09:55:52
[0d00h00m12s] 2025-01-02T10:00:49 <INF> [SNTP] =================================================
[0d00h00m12s] 2025-01-02T10:00:49 <INF> [SNTP] ==================== Start ======================
[0d00h00m12s] 2025-01-02T10:00:49 <INF> [SNTP] == Logs before time sync -> log_1970-01-01.txt ==
[0d00h00m12s] 2025-01-02T10:00:49 <INF> [SNTP] Time is synced with NTP Server pool.ntp.org: 2025-01-02 10:00:49
[0d00h00m13s] 2025-01-02T10:00:50 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 301
[0d00h00m13s] 2025-01-02T10:00:50 <INF> [MAIN] SD card info: Name: ASTC, Capacity: 15360MB, Free: 15343MB
[0d00h00m15s] 2025-01-02T10:00:52 <INF> [MAIN] Initialization completed successfully
[0d00h00m17s] 2025-01-02T10:00:54 <INF> [LOGFILE] Set log level to ERROR
[0d00h01m01s] 2025-01-02T10:01:38 <ERR> [POSTPROC] main: Raw: N54NN.7733, Value: , Status: Rate too high - Read: 5442.7733 - Pre: 42.0134 - Rate: 5400.7599
[0d00h01m12s] 2025-01-02T10:07:11 <ERR> [POSTPROC] main: Raw: 45544.5666, Value: , Status: Rate too high - Read: 45544.5666 - Pre: 42.0134 - Rate: 45502.5532
[0d00h01m12s] 2025-01-02T10:12:18 <ERR> [POSTPROC] main: Raw: 55555.8505, Value: , Status: Rate too high - Read: 55555.8505 - Pre: 42.0134 - Rate: 55513.8371
[0d00h00m10s] 2025-01-02T10:17:01 <INF> [SNTP] =================================================
[0d00h00m10s] 2025-01-02T10:17:01 <INF> [SNTP] ==================== Start ======================
[0d00h00m10s] 2025-01-02T10:17:01 <INF> [SNTP] == Logs before time sync -> log_1970-01-01.txt ==
[0d00h00m10s] 2025-01-02T10:17:01 <INF> [SNTP] Time is synced with NTP Server pool.ntp.org: 2025-01-02 10:17:01
[0d00h00m11s] 2025-01-02T10:17:01 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 301
[0d00h00m11s] 2025-01-02T10:17:01 <INF> [MAIN] SD card info: Name: ASTC, Capacity: 15360MB, Free: 15343MB
[0d00h00m13s] 2025-01-02T10:17:03 <INF> [MAIN] Initialization completed successfully
[0d00h00m15s] 2025-01-02T10:17:06 <INF> [LOGFILE] Set log level to ERROR
[0d00h00m58s] 2025-01-02T10:17:49 <ERR> [POSTPROC] main: Raw: 544NN.9586, Value: , Status: Rate too high - Read: 54442.9586 - Pre: 42.0134 - Rate: 54400.9452
[0d00h05m58s] 2025-01-02T10:22:48 <ERR> [POSTPROC] main: Raw: 744NN.6763, Value: , Status: Rate too high - Read: 74442.6763 - Pre: 42.0134 - Rate: 74400.6629
[0d00h00m11s] 2025-01-02T10:23:03 <INF> [SNTP] =================================================
[0d00h00m11s] 2025-01-02T10:23:03 <INF> [SNTP] ==================== Start ======================
[0d00h00m11s] 2025-01-02T10:23:03 <INF> [SNTP] == Logs before time sync -> log_1970-01-01.txt ==
[0d00h00m11s] 2025-01-02T10:23:03 <INF> [SNTP] Time is synced with NTP Server pool.ntp.org: 2025-01-02 10:23:03
[0d00h00m11s] 2025-01-02T10:23:04 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 301
[0d00h00m11s] 2025-01-02T10:23:04 <INF> [MAIN] SD card info: Name: ASTC, Capacity: 15360MB, Free: 15343MB
[0d00h00m13s] 2025-01-02T10:23:06 <INF> [MAIN] Initialization completed successfully
[0d00h00m15s] 2025-01-02T10:23:08 <INF> [LOGFILE] Set log level to ERROR
[0d00h00m58s] 2025-01-02T10:23:50 <ERR> [POSTPROC] main: Raw: 74N44.7663, Value: , Status: Rate too high - Read: 74044.7663 - Pre: 42.0134 - Rate: 74002.7529
[0d00h00m00s] 2025-01-02T09:24:29 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-01-02T09:24:29 <INF> [MAIN] ==================== Start ======================
[0d00h00m00s] 2025-01-02T09:24:29 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-01-02T09:24:29 <INF> [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2025-01-02T09:24:29 <INF> [MAIN] Total heap: 4380199 byte
[0d00h00m04s] 2025-01-02T09:24:34 <INF> [MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m04s] 2025-01-02T09:24:34 <INF> [SDCARD] Basic R/W check started...
[0d00h00m04s] 2025-01-02T09:24:34 <INF> [SDCARD] Basic R/W check successful
[0d00h00m04s] 2025-01-02T09:24:34 <INF> [SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m04s] 2025-01-02T09:24:34 <INF> [SNTP] Configuring NTP Client...
[0d00h00m04s] 2025-01-02T10:24:34 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m04s] 2025-01-02T10:24:34 <INF> [SNTP] time zone: +0100 Delta to UTC: 3600 seconds
[0d00h00m04s] 2025-01-02T10:24:34 <INF> [SNTP] Time is already set: 2025-01-02 10:24:34
[0d00h00m04s] 2025-01-02T10:24:34 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m05s] 2025-01-02T10:24:34 <INF> [SDCARD] Folder/file presence check started...
[0d00h00m05s] 2025-01-02T10:24:34 <INF> [SDCARD] Folder/file presence check successful
[0d00h00m05s] 2025-01-02T10:24:34 <INF> [MAIN] Tag: 'v15.7.0', Release: v15.7.0 (Commit: 0d0b018+), Date/Time: 2024-02-17 00:15, Web UI: Release: v15.7.0 (Commit: 0d0b018+)
[0d00h00m05s] 2025-01-02T10:24:34 <INF> [MAIN] Reset reason: Via esp_restart
[0d00h00m05s] 2025-01-02T10:24:34 <INF> [WLANINI] SSID: Wifi_Ubi
[0d00h00m05s] 2025-01-02T10:24:34 <INF> [WLANINI] Password: XXXXXXXX
[0d00h00m05s] 2025-01-02T10:24:34 <INF> [WLANINI] RSSIThreshold: -75
[0d00h00m05s] 2025-01-02T10:24:34 <INF> [MAIN] WLAN config loaded, init WIFI...
[0d00h00m05s] 2025-01-02T10:24:34 <INF> [WIFI] Automatic interface config --> Use DHCP service
[0d00h00m05s] 2025-01-02T10:24:35 <INF> [WIFI] Set hostname to: watermeter
[0d00h00m05s] 2025-01-02T10:24:35 <INF> [WIFI] Init successful
[0d00h00m07s] 2025-01-02T10:24:37 <INF> [WIFI] Connected to: Wifi_Ubi, RSSI: -48
[0d00h00m09s] 2025-01-02T10:24:39 <INF> [WIFI] Assigned IP: 192.168.1.103
[0d00h00m11s] 2025-01-02T10:26:33 <INF> [SNTP] =================================================
[0d00h00m11s] 2025-01-02T10:26:33 <INF> [SNTP] ==================== Start ======================
[0d00h00m11s] 2025-01-02T10:26:33 <INF> [SNTP] == Logs before time sync -> log_1970-01-01.txt ==
[0d00h00m11s] 2025-01-02T10:26:33 <INF> [SNTP] Time is synced with NTP Server pool.ntp.org: 2025-01-02 10:26:33
[0d00h00m13s] 2025-01-02T10:26:35 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 301
[0d00h00m13s] 2025-01-02T10:26:35 <INF> [MAIN] SD card info: Name: ASTC, Capacity: 15360MB, Free: 15343MB
[0d00h00m15s] 2025-01-02T10:26:37 <INF> [MAIN] Initialization completed successfully
[0d00h00m15s] 2025-01-02T10:26:37 <INF> [OTA] !!! System will restart within 5 sec!!!
[0d00h00m15s] 2025-01-02T10:26:37 <INF> [OTA] Reboot triggered by Software (5s)
[0d00h00m15s] 2025-01-02T10:26:37 <WRN> [OTA] Reboot in 5sec
[0d00h00m17s] 2025-01-02T10:26:40 <INF> [LOGFILE] Set log level to ERROR
[0d00h00m00s] 2025-01-02T09:26:45 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-01-02T09:26:45 <INF> [MAIN] ==================== Start ======================
[0d00h00m00s] 2025-01-02T09:26:45 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-01-02T09:26:45 <INF> [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2025-01-02T09:26:45 <INF> [MAIN] Total heap: 4380199 byte
[0d00h00m04s] 2025-01-02T09:26:50 <INF> [MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m04s] 2025-01-02T09:26:50 <INF> [SDCARD] Basic R/W check started...
[0d00h00m04s] 2025-01-02T09:26:50 <INF> [SDCARD] Basic R/W check successful
[0d00h00m04s] 2025-01-02T09:26:50 <INF> [SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m04s] 2025-01-02T09:26:50 <INF> [SNTP] Configuring NTP Client...
[0d00h00m04s] 2025-01-02T10:26:50 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m04s] 2025-01-02T10:26:50 <INF> [SNTP] time zone: +0100 Delta to UTC: 3600 seconds
[0d00h00m04s] 2025-01-02T10:26:50 <INF> [SNTP] Time is already set: 2025-01-02 10:26:50
[0d00h00m04s] 2025-01-02T10:26:50 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m05s] 2025-01-02T10:26:50 <INF> [SDCARD] Folder/file presence check started...
[0d00h00m05s] 2025-01-02T10:26:50 <INF> [SDCARD] Folder/file presence check successful
[0d00h00m05s] 2025-01-02T10:26:50 <INF> [MAIN] Tag: 'v15.7.0', Release: v15.7.0 (Commit: 0d0b018+), Date/Time: 2024-02-17 00:15, Web UI: Release: v15.7.0 (Commit: 0d0b018+)
[0d00h00m05s] 2025-01-02T10:26:50 <INF> [MAIN] Reset reason: Via esp_restart
[0d00h00m05s] 2025-01-02T10:26:50 <INF> [WLANINI] SSID: Wifi_Ubi
[0d00h00m05s] 2025-01-02T10:26:50 <INF> [WLANINI] Password: XXXXXXXX
[0d00h00m05s] 2025-01-02T10:26:50 <INF> [WLANINI] RSSIThreshold: -75
[0d00h00m05s] 2025-01-02T10:26:50 <INF> [MAIN] WLAN config loaded, init WIFI...
[0d00h00m05s] 2025-01-02T10:26:50 <INF> [WIFI] Automatic interface config --> Use DHCP service
[0d00h00m05s] 2025-01-02T10:26:51 <INF> [WIFI] Set hostname to: watermeter
[0d00h00m05s] 2025-01-02T10:26:51 <INF> [WIFI] Init successful
[0d00h00m07s] 2025-01-02T10:26:53 <INF> [WIFI] Connected to: Wifi_Ubi, RSSI: -39
[0d00h00m09s] 2025-01-02T10:26:55 <INF> [WIFI] Assigned IP: 192.168.1.103
[0d00h00m09s] 2025-01-02T10:26:55 <INF> [SNTP] Time is synced with NTP Server pool.ntp.org: 2025-01-02 10:26:55
[0d00h00m11s] 2025-01-02T10:26:57 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 301
[0d00h00m11s] 2025-01-02T10:26:57 <INF> [MAIN] SD card info: Name: ASTC, Capacity: 15360MB, Free: 15343MB
[0d00h00m13s] 2025-01-02T10:26:59 <INF> [MAIN] Initialization completed successfully
[0d00h00m15s] 2025-01-02T10:27:01 <INF> [LOGFILE] Set log level to ERROR
[0d00h00m44s] 2025-01-02T10:27:30 <ERR> [OTA FILE] File sending failed!
[0d00h00m44s] 2025-01-02T10:27:30 <ERR> [OTA FILE] File sending failed!
[0d00h00m44s] 2025-01-02T10:27:30 <ERR> [OTA FILE] File sending failed!
[0d00h01m02s] 2025-01-02T10:27:47 <ERR> [POSTPROC] main: Raw: 5444N.0514, Value: , Status: Rate too high - Read: 54442.0514 - Pre: 42.0134 - Rate: 54400.0380
[0d00h05m58s] 2025-01-02T10:32:44 <ERR> [POSTPROC] main: Raw: 444N4.2596, Value: , Status: Rate too high - Read: 44444.2596 - Pre: 42.0134 - Rate: 44402.2462
[0d00h10m58s] 2025-01-02T10:37:44 <ERR> [POSTPROC] main: Raw: 4N4N4.4598, Value: , Status: Rate too high - Read: 40444.4598 - Pre: 42.0134 - Rate: 40402.4464
[0d00h15m58s] 2025-01-02T10:42:44 <ERR> [POSTPROC] main: Raw: N546N.2498, Value: , Status: Rate too high - Read: 5462.2498 - Pre: 42.0134 - Rate: 5420.2364
[0d00h00m00s] 2025-01-02T09:43:52 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-01-02T09:43:52 <INF> [MAIN] ==================== Start ======================
[0d00h00m00s] 2025-01-02T09:43:52 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-01-02T09:43:52 <INF> [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2025-01-02T09:43:52 <INF> [MAIN] Total heap: 4380199 byte
[0d00h00m04s] 2025-01-02T09:43:56 <INF> [MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m04s] 2025-01-02T09:43:56 <INF> [SDCARD] Basic R/W check started...
[0d00h00m04s] 2025-01-02T09:43:56 <INF> [SDCARD] Basic R/W check successful
[0d00h00m04s] 2025-01-02T09:43:56 <INF> [SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m04s] 2025-01-02T09:43:56 <INF> [SNTP] Configuring NTP Client...
[0d00h00m04s] 2025-01-02T10:43:56 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m04s] 2025-01-02T10:43:56 <INF> [SNTP] time zone: +0100 Delta to UTC: 3600 seconds
[0d00h00m04s] 2025-01-02T10:43:56 <INF> [SNTP] Time is already set: 2025-01-02 10:43:56
[0d00h00m04s] 2025-01-02T10:43:56 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m05s] 2025-01-02T10:43:57 <INF> [OTA] Start update process (/sdcard/firmware/AI-on-the-edge-device__update__v16.0.0-RC5.zip)
[0d00h00m05s] 2025-01-02T10:43:57 <INF> [OTA] File: /sdcard/firmware/AI-on-the-edge-device__update__v16.0.0-RC5.zip Filetype: ZIP
[0d00h00m05s] 2025-01-02T10:43:57 <INF> [OTA FILE] Files to be extracted: 90
[0d00h00m44s] 2025-01-02T10:44:37 <INF> [OTA] Files unzipped.
[0d00h00m44s] 2025-01-02T10:44:37 <INF> [OTA] Found firmware.bin
[0d00h00m54s] 2025-01-02T10:44:47 <INF> [OTA] Trigger reboot due to firmware update
[0d00h00m54s] 2025-01-02T10:44:47 <WRN> [OTA] Reboot in 5sec
[0d00h00m00s] 2025-01-02T09:44:53 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-01-02T09:44:53 <INF> [MAIN] ==================== Start ======================
[0d00h00m00s] 2025-01-02T09:44:53 <INF> [MAIN] =================================================
[0d00h00m00s] 2025-01-02T09:44:53 <INF> [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2025-01-02T09:44:53 <INF> [MAIN] Total heap: 4382863 byte
[0d00h00m02s] 2025-01-02T09:44:56 <INF> [MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m02s] 2025-01-02T09:44:56 <INF> [SDCARD] Basic R/W check started...
[0d00h00m02s] 2025-01-02T09:44:56 <INF> [SDCARD] Basic R/W check successful
[0d00h00m02s] 2025-01-02T09:44:56 <ERR> [HELPER] Migrated Configfile line 'Brightness = 0' to 'CamBrightness = 0'
[0d00h00m02s] 2025-01-02T09:44:56 <ERR> [HELPER] Migrated Configfile line 'Contrast = 0' to 'CamContrast = 0'
[0d00h00m02s] 2025-01-02T09:44:56 <ERR> [HELPER] Migrated Configfile line 'Saturation = 0' to 'CamSaturation = 0'
[0d00h00m02s] 2025-01-02T09:44:56 <ERR> [HELPER] Migrated Configfile line 'Sharpness = 0' to 'CamSharpness = 0'
[0d00h00m02s] 2025-01-02T09:44:56 <ERR> [HELPER] Migrated Configfile line 'ImageQuality = 12' to 'CamQuality = 12'
[0d00h00m02s] 2025-01-02T09:44:56 <ERR> [HELPER] Migrated Configfile line 'ImageSize = VGA' to ';UNUSED_PARAMETER = VGA'
[0d00h00m02s] 2025-01-02T09:44:56 <ERR> [HELPER] Migrated Configfile line 'Grayscale = false' to ';UNUSED_PARAMETER = false'
[0d00h00m02s] 2025-01-02T09:44:56 <ERR> [HELPER] Migrated Configfile line 'Negative = false' to ';UNUSED_PARAMETER = false'
[0d00h00m02s] 2025-01-02T09:44:56 <ERR> [HELPER] Migrated Configfile line 'Aec2 = false' to 'CamAec2 = false'
[0d00h00m02s] 2025-01-02T09:44:56 <ERR> [HELPER] Migrated Configfile line 'AutoExposureLevel = 0' to 'CamAeLevel = 0'
[0d00h00m02s] 2025-01-02T09:44:56 <ERR> [HELPER] Migrated Configfile line 'FixedExposure = false' to 'CamAec = false'
[0d00h00m02s] 2025-01-02T09:44:56 <ERR> [HELPER] Migrated Configfile line 'InitialMirror = false' to ';UNUSED_PARAMETER = false'
[0d00h00m02s] 2025-01-02T09:44:56 <ERR> [HELPER] Migrated Configfile line 'FlipImageSize = false' to ';UNUSED_PARAMETER = false'
[0d00h00m02s] 2025-01-02T09:44:56 <ERR> [MAIN] Migrated Configfile line 'Zoom' to 'CamZoom'
[0d00h00m02s] 2025-01-02T09:44:56 <ERR> [MAIN] Migrated Configfile line 'ZoomMode' to 'CamZoomSize'
[0d00h00m02s] 2025-01-02T09:44:56 <ERR> [MAIN] Migrated Configfile line 'ZoomOffsetX' to 'CamZoomOffsetX'
[0d00h00m02s] 2025-01-02T09:44:56 <ERR> [MAIN] Migrated Configfile line 'ZoomOffsetY' to 'CamZoomOffsetY'
[0d00h00m02s] 2025-01-02T09:44:56 <INF> [MAIN] Config file migrated. Saved backup to /sdcard/config/config.bak
[0d00h00m02s] 2025-01-02T09:44:56 <INF> [SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m02s] 2025-01-02T09:44:56 <INF> [SNTP] Configuring NTP Client...
[0d00h00m02s] 2025-01-02T10:44:56 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m02s] 2025-01-02T10:44:56 <INF> [SNTP] time zone: +0100 Delta to UTC: 3600 seconds
[0d00h00m02s] 2025-01-02T10:44:56 <INF> [SNTP] Time is already set: 2025-01-02 10:44:56
[0d00h00m02s] 2025-01-02T10:44:56 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m03s] 2025-01-02T10:44:57 <INF> [SDCARD] Folder/file presence check started...
[0d00h00m03s] 2025-01-02T10:44:57 <INF> [SDCARD] Folder/file presence check successful
[0d00h00m03s] 2025-01-02T10:44:57 <INF> [MAIN] Tag: 'v16.0.0-RC5', Release: v16.0.0-RC5 (Commit: 7836323+), Date/Time: 2024-12-05 00:08, Web UI: Release: v16.0.0-RC5 (Commit: 7836323+)
[0d00h00m03s] 2025-01-02T10:44:57 <INF> [MAIN] Reset reason: Via esp_restart
[0d00h00m03s] 2025-01-02T10:44:57 <INF> [WLANINI] SSID: Wifi_Ubi
[0d00h00m03s] 2025-01-02T10:44:57 <INF> [WLANINI] Password: XXXXXXXX
[0d00h00m03s] 2025-01-02T10:44:57 <INF> [WLANINI] RSSIThreshold: -75
[0d00h00m03s] 2025-01-02T10:44:57 <INF> [MAIN] WLAN config loaded, init WIFI...
[0d00h00m03s] 2025-01-02T10:44:57 <INF> [WIFI] Automatic interface config --> Use DHCP service
[0d00h00m03s] 2025-01-02T10:44:57 <INF> [WIFI] Set hostname to: watermeter
[0d00h00m03s] 2025-01-02T10:44:57 <INF> [WIFI] Init successful
[0d00h00m06s] 2025-01-02T10:45:00 <INF> [WIFI] Connected to: Wifi_Ubi, RSSI: -38
[0d00h00m07s] 2025-01-02T10:45:01 <INF> [WIFI] Assigned IP: 192.168.1.103
[0d00h00m07s] 2025-01-02T10:45:01 <INF> [SNTP] Time is synced with NTP Server pool.ntp.org: 2025-01-02 10:45:01
[0d00h00m09s] 2025-01-02T10:45:03 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 301
[0d00h00m09s] 2025-01-02T10:45:03 <INF> [MAIN] SD card info: Name: ASTC, Capacity: 15360MB, Free: 15336MB
[0d00h00m11s] 2025-01-02T10:45:05 <INF> [MAIN] Initialization completed successfully
[0d00h00m14s] 2025-01-02T10:45:08 <INF> [TFLITE] Trying to load the model. If it crashes here, it ist most likely due to a corrupted model!
[0d00h00m14s] 2025-01-02T10:45:08 <INF> [TFLITE] Trying to load the model. If it crashes here, it ist most likely due to a corrupted model!
[0d00h00m14s] 2025-01-02T10:45:08 <INF> [LOGFILE] Set log level to ERROR
[0d00h00m57s] 2025-01-02T10:45:51 <ERR> [POSTPROC] main: Raw: 7N54N.3706, Value: , Status: Rate too high - Read: 70542.3706 - Pre: 42.0134 - Rate: 70500.3572
[0d00h00m09s] 2025-01-02T10:47:30 <INF> [SNTP] =================================================
[0d00h00m09s] 2025-01-02T10:47:31 <INF> [SNTP] ==================== Start ======================
[0d00h00m09s] 2025-01-02T10:47:31 <INF> [SNTP] == Logs before time sync -> log_1970-01-01.txt ==
[0d00h00m09s] 2025-01-02T10:47:31 <INF> [SNTP] Time is synced with NTP Server pool.ntp.org: 2025-01-02 10:47:31
[0d00h00m09s] 2025-01-02T10:47:31 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 301
[0d00h00m09s] 2025-01-02T10:47:31 <INF> [MAIN] SD card info: Name: ASTC, Capacity: 15360MB, Free: 15336MB
[0d00h00m11s] 2025-01-02T10:47:33 <INF> [MAIN] Initialization completed successfully
[0d00h00m13s] 2025-01-02T10:47:35 <INF> [TFLITE] Trying to load the model. If it crashes here, it ist most likely due to a corrupted model!
[0d00h00m14s] 2025-01-02T10:47:35 <INF> [TFLITE] Trying to load the model. If it crashes here, it ist most likely due to a corrupted model!
[0d00h00m14s] 2025-01-02T10:47:36 <INF> [LOGFILE] Set log level to ERROR
[0d00h00m56s] 2025-01-02T10:48:18 <ERR> [POSTPROC] main: Raw: 44444.7878, Value: , Status: Rate too high - Read: 44444.7878 - Pre: 42.0134 - Rate: 44402.7744

 
Reload Show Full Log Show Older Log Files

Expected Behavior

After reconnection the power source that the config will be loaded and the wifi connection establish

Screenshots

Additional Context

No response

[caco3]

According to the logs it successfully got a DHCP IP:
Assigned IP: 192.168.1.103

I can see you use an access point from ubiquity. It could be an issue with that access point.
Does your router show the devices as assigned?