Skip to content

This issue was moved to a discussion.

You can continue the conversation there. Go to discussion →

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Ständige Reboots #2752

Closed
firebowl opened this issue Dec 21, 2023 · 1 comment
Closed

Ständige Reboots #2752

firebowl opened this issue Dec 21, 2023 · 1 comment
Labels
bug Something isn't working

Comments

@firebowl
Copy link

The Problem

Seit einiger Zeit startet der ESP32 permanent neu. Ab und zu kann ich für einige Zeit aufs Webinterface zugreifen oder ich sehe im MQTT Broker, dass kurz eine Verbindung aufgebaut wird.
Ich hatte vor kurzem auf neue WLAN Hardware umgestellt (AVM Fritzbox -> Synology Router) aber die SSID und das Kennwort beibehalten. Der neue Router steht zwar weiter weg als der alte aber es hat eine Zeit lang funktioniert.
Ich habe das Gefühl, dass ich eine höhere Chance habe auf das System zuzugreifen wenn ich es länger als ein paar Sekunden vom Strom trenne.
Jetzt gerade eben hat es nach einem Reboot ein Bild inkl. Erkennung gemacht und die Daten per MQTT an HA übertragen.
Allerdings mit einem Timestamp der sagt das der NTP Server nicht erreicht wurde oder die Zeit nicht übernommen werden konnte.
Man sieht auch die falsche Zeit im Log.
Im Router sehe ich den ESP eine WLAN Verbindung aufbauen und im DNS Server sehe ich, dass eine DNS Anfrage nach pool.ntp.org gestellt und beantwortet wird.

Version

Firmware version: Release: v15.3.0 (Commit: 3fbff0a) Firmware build time: 22.07.2023 09:42 Web interface version: Release: v15.3.0 (Commit: 3fbff0a)

Logfile

[0d00h00m00s] 1970-01-01T00:00:00 <INF> [MAIN] ==================== Start ======================
[0d00h00m00s] 1970-01-01T00:00:00 <INF> [MAIN] =================================================
[0d00h00m00s] 1970-01-01T00:00:00 <INF> [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 1970-01-01T00:00:00 <INF> [MAIN] Total heap: 4377023 byte
[0d00h00m04s] 1970-01-01T00:00:04 <INF> [MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m04s] 1970-01-01T00:00:04 <INF> [SDCARD] Basic R/W check started...
[0d00h00m04s] 1970-01-01T00:00:04 <INF> [SDCARD] Basic R/W check successful
[0d00h00m04s] 1970-01-01T00:00:04 <INF> [SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m04s] 1970-01-01T00:00:04 <INF> [SNTP] Configuring NTP Client...
[0d00h00m04s] 1970-01-01T01:00:04 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m04s] 1970-01-01T01:00:04 <INF> [SNTP] The local time is unknown, starting with 1970-01-01 01:00:04
[0d00h00m04s] 1970-01-01T01:00:04 <INF> [SNTP] Once the NTP server provides a time, we will switch to that one
[0d00h00m04s] 1970-01-01T01:00:04 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [SDCARD] Folder/file presence check started...
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [SDCARD] Folder/file presence check successful
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [MAIN] Tag: 'v15.3.0', Release: v15.3.0 (Commit: 3fbff0a), Date/Time: 2023-07-22 09:42, Web UI: Release: v15.3.0 (Commit: 3fbff0a)
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [MAIN] Reset reason: Power-on event (or reset button)
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [WLANINI] SSID: Eureka
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [WLANINI] Password: XXXXXXXX
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [WLANINI] RSSIThreshold: 0
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [MAIN] WLAN config loaded, init WIFI...
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [WIFI] Automatic interface config --> Use DHCP service
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [WIFI] Set hostname to: watermeter
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [WIFI] Init successful
[0d00h00m17s] 1970-01-01T01:00:17 <WRN> [WIFI] Disconnected (2, Auth fail)
[0d00h00m20s] 1970-01-01T01:00:20 <WRN> [WIFI] Disconnected (205)
[0d00h00m23s] 1970-01-01T01:00:23 <INF> [WIFI] Connected to: Eureka, RSSI: -75
[0d00h00m24s] 1970-01-01T01:00:24 <INF> [WIFI] Assigned IP: 192.168.1.243
[0d00h00m26s] 1970-01-01T01:00:26 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 300
[0d00h00m26s] 1970-01-01T01:00:26 <INF> [MAIN] SD card info: Name: CBADS, Capacity: 15003MB, Free: 14980MB
[0d00h00m28s] 1970-01-01T01:00:28 <INF> [MAIN] Initialization completed successfully
[0d00h00m31s] 1970-01-01T01:00:31 <INF> [LOGFILE] Set log level to ERROR
[0d00h00m00s] 1970-01-01T00:00:00 <INF> [MAIN] =================================================
[0d00h00m00s] 1970-01-01T00:00:00 <INF> [MAIN] ==================== Start ======================
[0d00h00m00s] 1970-01-01T00:00:00 <INF> [MAIN] =================================================
[0d00h00m00s] 1970-01-01T00:00:00 <INF> [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 1970-01-01T00:00:00 <INF> [MAIN] Total heap: 4377023 byte
[0d00h00m04s] 1970-01-01T00:00:04 <INF> [MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m04s] 1970-01-01T00:00:04 <INF> [SDCARD] Basic R/W check started...
[0d00h00m04s] 1970-01-01T00:00:04 <INF> [SDCARD] Basic R/W check successful
[0d00h00m04s] 1970-01-01T00:00:04 <INF> [SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m04s] 1970-01-01T00:00:04 <INF> [SNTP] Configuring NTP Client...
[0d00h00m04s] 1970-01-01T01:00:04 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m04s] 1970-01-01T01:00:04 <INF> [SNTP] The local time is unknown, starting with 1970-01-01 01:00:04
[0d00h00m04s] 1970-01-01T01:00:04 <INF> [SNTP] Once the NTP server provides a time, we will switch to that one
[0d00h00m04s] 1970-01-01T01:00:04 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [SDCARD] Folder/file presence check started...
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [SDCARD] Folder/file presence check successful
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [MAIN] Tag: 'v15.3.0', Release: v15.3.0 (Commit: 3fbff0a), Date/Time: 2023-07-22 09:42, Web UI: Release: v15.3.0 (Commit: 3fbff0a)
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [MAIN] Reset reason: Power-on event (or reset button)
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [WLANINI] SSID: Eureka
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [WLANINI] Password: XXXXXXXX
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [WLANINI] RSSIThreshold: 0
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [MAIN] WLAN config loaded, init WIFI...
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [WIFI] Automatic interface config --> Use DHCP service
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [WIFI] Set hostname to: watermeter
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [WIFI] Init successful
[0d00h00m11s] 1970-01-01T01:00:11 <INF> [WIFI] Connected to: Eureka, RSSI: -73
[0d00h00m17s] 1970-01-01T01:00:17 <INF> [WIFI] Assigned IP: 192.168.1.243
[0d00h00m25s] 1970-01-01T01:00:25 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 300
[0d00h00m25s] 1970-01-01T01:00:25 <INF> [MAIN] SD card info: Name: CBADS, Capacity: 15003MB, Free: 14980MB
[0d00h00m27s] 1970-01-01T01:00:28 <INF> [MAIN] Initialization completed successfully
[0d00h00m30s] 1970-01-01T01:00:31 <INF> [LOGFILE] Set log level to ERROR
[0d00h00m00s] 1970-01-01T00:00:00 <INF> [MAIN] =================================================
[0d00h00m00s] 1970-01-01T00:00:00 <INF> [MAIN] ==================== Start ======================
[0d00h00m00s] 1970-01-01T00:00:00 <INF> [MAIN] =================================================
[0d00h00m00s] 1970-01-01T00:00:00 <INF> [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 1970-01-01T00:00:00 <INF> [MAIN] Total heap: 4377023 byte
[0d00h00m04s] 1970-01-01T00:00:04 <INF> [MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m04s] 1970-01-01T00:00:04 <INF> [SDCARD] Basic R/W check started...
[0d00h00m04s] 1970-01-01T00:00:04 <INF> [SDCARD] Basic R/W check successful
[0d00h00m04s] 1970-01-01T00:00:04 <INF> [SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m04s] 1970-01-01T00:00:04 <INF> [SNTP] Configuring NTP Client...
[0d00h00m04s] 1970-01-01T01:00:04 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m04s] 1970-01-01T01:00:04 <INF> [SNTP] The local time is unknown, starting with 1970-01-01 01:00:04
[0d00h00m04s] 1970-01-01T01:00:04 <INF> [SNTP] Once the NTP server provides a time, we will switch to that one
[0d00h00m04s] 1970-01-01T01:00:04 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [SDCARD] Folder/file presence check started...
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [SDCARD] Folder/file presence check successful
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [MAIN] Tag: 'v15.3.0', Release: v15.3.0 (Commit: 3fbff0a), Date/Time: 2023-07-22 09:42, Web UI: Release: v15.3.0 (Commit: 3fbff0a)
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [MAIN] Reset reason: Power-on event (or reset button)
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [WLANINI] SSID: Eureka
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [WLANINI] Password: XXXXXXXX
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [WLANINI] RSSIThreshold: 0
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [MAIN] WLAN config loaded, init WIFI...
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [WIFI] Automatic interface config --> Use DHCP service
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [WIFI] Set hostname to: watermeter
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [WIFI] Init successful
[0d00h00m11s] 1970-01-01T01:00:11 <WRN> [WIFI] Disconnected (203)
[0d00h00m13s] 1970-01-01T01:00:13 <WRN> [WIFI] Disconnected (205)
[0d00h00m17s] 1970-01-01T01:00:17 <INF> [WIFI] Connected to: Eureka, RSSI: -77
[0d00h00m18s] 1970-01-01T01:00:18 <INF> [WIFI] Assigned IP: 192.168.1.243
[0d00h00m25s] 1970-01-01T01:00:25 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 300
[0d00h00m25s] 1970-01-01T01:00:25 <INF> [MAIN] SD card info: Name: CBADS, Capacity: 15003MB, Free: 14980MB
[0d00h00m27s] 1970-01-01T01:00:27 <INF> [MAIN] Initialization completed successfully
[0d00h00m31s] 1970-01-01T01:00:31 <INF> [LOGFILE] Set log level to ERROR
[0d00h00m00s] 1970-01-01T00:00:00 <INF> [MAIN] =================================================
[0d00h00m00s] 1970-01-01T00:00:00 <INF> [MAIN] ==================== Start ======================
[0d00h00m00s] 1970-01-01T00:00:00 <INF> [MAIN] =================================================
[0d00h00m00s] 1970-01-01T00:00:00 <INF> [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 1970-01-01T00:00:00 <INF> [MAIN] Total heap: 4377023 byte
[0d00h00m04s] 1970-01-01T00:00:04 <INF> [MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m04s] 1970-01-01T00:00:04 <INF> [SDCARD] Basic R/W check started...
[0d00h00m04s] 1970-01-01T00:00:04 <INF> [SDCARD] Basic R/W check successful
[0d00h00m04s] 1970-01-01T00:00:04 <INF> [SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m04s] 1970-01-01T00:00:04 <INF> [SNTP] Configuring NTP Client...
[0d00h00m04s] 1970-01-01T01:00:04 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m04s] 1970-01-01T01:00:04 <INF> [SNTP] The local time is unknown, starting with 1970-01-01 01:00:04
[0d00h00m04s] 1970-01-01T01:00:04 <INF> [SNTP] Once the NTP server provides a time, we will switch to that one
[0d00h00m04s] 1970-01-01T01:00:04 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [SDCARD] Folder/file presence check started...
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [SDCARD] Folder/file presence check successful
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [MAIN] Tag: 'v15.3.0', Release: v15.3.0 (Commit: 3fbff0a), Date/Time: 2023-07-22 09:42, Web UI: Release: v15.3.0 (Commit: 3fbff0a)
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [MAIN] Reset reason: Power-on event (or reset button)
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [WLANINI] SSID: Eureka
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [WLANINI] Password: XXXXXXXX
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [WLANINI] RSSIThreshold: 0
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [MAIN] WLAN config loaded, init WIFI...
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [WIFI] Automatic interface config --> Use DHCP service
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [WIFI] Set hostname to: watermeter
[0d00h00m05s] 1970-01-01T01:00:05 <INF> [WIFI] Init successful
[0d00h00m17s] 1970-01-01T01:00:17 <WRN> [WIFI] Disconnected (2, Auth fail)
[0d00h00m19s] 1970-01-01T01:00:19 <WRN> [WIFI] Disconnected (205)
[0d00h00m23s] 1970-01-01T01:00:23 <INF> [WIFI] Connected to: Eureka, RSSI: -74
[0d00h00m25s] 1970-01-01T01:00:25 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 300
[0d00h00m25s] 1970-01-01T01:00:25 <INF> [MAIN] SD card info: Name: CBADS, Capacity: 15003MB, Free: 14980MB
[0d00h00m27s] 1970-01-01T01:00:27 <INF> [MAIN] Initialization completed successfully
[0d00h00m28s] 1970-01-01T01:00:28 <WRN> [WIFI] Disconnected (209)
[0d00h00m30s] 1970-01-01T01:00:30 <INF> [LOGFILE] Set log level to ERROR

Expected Behavior

No response

Screenshots

No response

Additional Context

No response
@firebowl firebowl added the bug Something isn't working label Dec 21, 2023
@firebowl
Copy link
Author

Kleiner Nachtrag, kurz nach dem schreiben wurde Datum und Uhrzeit korrekt eingestellt.
Mal schauen wann der nächste Reboot erfolgt.

Repository owner locked and limited conversation to collaborators Dec 23, 2023
@caco3 caco3 converted this issue into discussion #2762 Dec 23, 2023

This issue was moved to a discussion.

You can continue the conversation there. Go to discussion →

Assignees
No one assigned
Labels
bug Something isn't working
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
1 participant
@firebowl