pistar-mmdvmrpthatflash

#!/bin/bash
#
###############################################################################
#                                                                             #
#                   Pi-Star RPT_Hat Firmware Update Tool                      #
#                                                                             #
#    Version 0.1, Code, Design and Development by Florian Wolters (DF2ET).    #
#                                                                             #
#                 Make it simple to update the Firmware                       #
#                                                                             #
###############################################################################
#
if [ "$(id -u)" != "0" ]; then
  echo -e "You need to be root to run this command...\n"
  exit 1
fi
#

if [ -z "$1" ]
then
  echo "This tool is used to flash your MMDVM_HS Hat Modem"
  echo "to use the command, you will need to pass the name of your modem,"
  echo "please choose form the list below..."
  echo ""
  echo "To flash RPT_HAT (12.0000MHz TCXO) connected to GPIO, run: pistar-mmdvmrpthatflash rpt_hat"
  echo "To flash RPT_HAT (12.2880MHz TCXO) connected to GPIO, run: pistar-mmdvmrpthatflash rpt_hat-12.288mhz"
  echo "To flash RPT_HAT (14.4000MHz TCXO) connected to GPIO, run: pistar-mmdvmrpthatflash rpt_hat-14.4mhz"
  echo "To flash RPT_HAT (19.2000MHz TCXO) connected to GPIO, run: pistar-mmdvmrpthatflash rpt_hat-19.2mhz"
  echo ""
# Get the pretty name for the chosen Modem according to the dashboard.
  if [ -f '/etc/dstar-radio.mmdvmhost' ]; then
    # Get the modem that the user has selected.
    modemSelected=$(grep 'Hardware=' /etc/dstar-radio.mmdvmhost)
    modemSelected=${modemSelected#*=}

    # Get the user friendly version of the selected Modem.
    modemSelectedHuman=$(grep value=\"${modemSelected}\" /var/www/dashboard/admin/configure.php | head -n 1)
    modemSelectedHuman=${modemSelectedHuman#*\">}
    modemSelectedHuman=${modemSelectedHuman::-9}
    modemSelectedHuman=${modemSelectedHuman//amp;/}
    echo "Selected Modem:     ${modemSelectedHuman}"
  fi
  
  # Get the Modem info from the Log
  numLogs=$(ls -1rt /var/log/pi-star/MMDVM-*.log | wc -l)
  if [[ ${numLogs} -gt 0 ]]; then
    # Get the physically connected modem from the logs
    modemLog=$(tac $(ls -1rt /var/log/pi-star/MMDVM-*.log | tail -n1 ) | grep "MMDVM protocol" -m 1 | sed -n 's/description: /&\n/;s/.*\n//p')
    echo "Connected Hardware: ${modemLog}"
    
    # Get the TCXO data
    if [[ ${modemLog} == *"MHz"* ]]; then
      tcxoData=$(echo ${modemLog} | sed -e "s/.*\s\(\w\+\.\w\+ MHz\)\s.*/\1/")
      echo "TCXO Value:         ${tcxoData}"
    fi
  fi
  exit 0
fi

#
# OK we know what the modem is, let get the firmware string from the log...
#
tac $(ls -1rt /var/log/pi-star/MMDVM-*.log | tail -n1 ) | grep "MMDVM protocol" -m 1 | sed -n 's/description: /&\n/;s/.*\n//p'
read -n 1 -s -r -p "Press any key to write the ${1} firmware to this modem or Ctrl-C to quit..."
echo ""

#
# Download the correct firmware
#
if [ "$1" ]
then
  rm -rf /tmp/mmdvmrpthatfirmware 2> /dev/null
  mkdir /tmp/mmdvmrpthatfirmware 2> /dev/null
  echo "Preparing tools ..."
  cd /tmp/mmdvmrpthatfirmware
  rm -rf stm32flash-code
  git clone git://git.code.sf.net/p/stm32flash/code stm32flash-code
  cd stm32flash-code
  make
  cd ..
  
  # Stop MMDVMHost process to free serial port
  sudo killall MMDVMHost >/dev/null 2>&1

  echo "Resetting MCU to DFU mode ..."
  echo 20 > /sys/class/gpio/export
  echo 21 > /sys/class/gpio/export
  echo out > /sys/class/gpio/gpio20/direction
  echo out > /sys/class/gpio/gpio21/direction
  echo 1 > /sys/class/gpio/gpio20/value
  echo 0 > /sys/class/gpio/gpio21/value
  sleep 2
  echo 1 > /sys/class/gpio/gpio21/value
  sleep 2
    
  case ${1} in
  rpt_hat)
    echo "Flashing your ${1} modem to the latest version"
    wget https://www.df2et.de/mmdvm/RPT_Hat-12mhz.bin
    wget https://www.df2et.de/mmdvm/RPT_Hat-12mhz.bin.sha256
    sha256sum -c RPT_Hat-12mhz.bin.sha256
    if [ $? -ne 0 ]; then
      echo "Validating fimrware checksum failed!"
      exit 2
    fi
    echo "Flashing MMDVM_RPT_Hat"
    stm32flash-code/stm32flash -w RPT_Hat-12mhz.bin -g 0x0 -R /dev/ttyAMA0
    sleep 1
    # Flashing always fails the first time. for some reason So just try it again ...
    stm32flash-code/stm32flash -w RPT_Hat-12mhz.bin -g 0x0 -R /dev/ttyAMA0
    sleep 1
    echo 0 > /sys/class/gpio/gpio20/value
    echo ""
    rm -rf /tmp/mmdvmrpthatfirmware 2> /dev/null
    read -n 1 -s -r -p "Flashing your ${1} modem complete, press any key to reboot your Pi-Star System..."
    shutdown -r now
    exit 0
  ;;
  rpt_hat-12.288mhz)
    echo "Flashing your ${1} modem to the latest version"
    wget https://www.df2et.de/mmdvm/RPT_Hat-12.288mhz.bin
    wget https://www.df2et.de/mmdvm/RPT_Hat-12.288mhz.bin.sha256
    sha256sum -c RPT_Hat-12.288mhz.bin.sha256
    if [ $? -ne 0 ]; then
      echo "Validating fimrware checksum failed!"
      exit 2
    fi
    echo "Flashing MMDVM_RPT_Hat"
    stm32flash-code/stm32flash -w RPT_Hat-12.288mhz.bin -g 0x0 -R /dev/ttyAMA0
    sleep 1
    # Flashing always fails the first time. for some reason So just try it again ...
    stm32flash-code/stm32flash -w RPT_Hat-12.288mhz.bin -g 0x0 -R /dev/ttyAMA0
    sleep 1
    echo 0 > /sys/class/gpio/gpio20/value
    echo ""
    rm -rf /tmp/mmdvmrpthatfirmware 2> /dev/null
    read -n 1 -s -r -p "Flashing your ${1} modem complete, press any key to reboot your Pi-Star System..."
    shutdown -r now
    exit 0
  ;;
  rpt_hat-14.4mhz)
    echo "Flashing your ${1} modem to the latest version"
    wget https://www.df2et.de/mmdvm/RPT_Hat-14.4mhz.bin
    wget https://www.df2et.de/mmdvm/RPT_Hat-14.4mhz.bin.sha256
    sha256sum -c RPT_Hat-14.4mhz.bin.sha256
    if [ $? -ne 0 ]; then
      echo "Validating fimrware checksum failed!"
      exit 2
    fi
    echo "Flashing MMDVM_RPT_Hat"
    stm32flash-code/stm32flash -w RPT_Hat-14.4mhz.bin -g 0x0 -R /dev/ttyAMA0
    sleep 1
    # Flashing always fails the first time. for some reason So just try it again ...
    stm32flash-code/stm32flash -w RPT_Hat-14.4mhz.bin -g 0x0 -R /dev/ttyAMA0
    sleep 1
    echo 0 > /sys/class/gpio/gpio20/value
    echo ""
    rm -rf /tmp/mmdvmrpthatfirmware 2> /dev/null
    read -n 1 -s -r -p "Flashing your ${1} modem complete, press any key to reboot your Pi-Star System..."
    shutdown -r now
    exit 0
  ;;
  rpt_hat-19.2mhz)
    echo "Flashing your ${1} modem to the latest version"
    wget https://www.df2et.de/mmdvm/RPT_Hat-19.2mhz.bin
    wget https://www.df2et.de/mmdvm/RPT_Hat-19.2mhz.bin.sha256
    sha256sum -c RPT_Hat-19.2mhz.bin.sha256
    if [ $? -ne 0 ]; then
      echo "Validating fimrware checksum failed!"
      exit 2
    fi
    echo "Flashing MMDVM_RPT_Hat"
    stm32flash-code/stm32flash -w RPT_Hat-19.2mhz.bin -g 0x0 -R /dev/ttyAMA0
    sleep 1
    # Flashing always fails the first time. for some reason So just try it again ...
    stm32flash-code/stm32flash -w RPT_Hat-19.2mhz.bin -g 0x0 -R /dev/ttyAMA0
    sleep 1
    echo 0 > /sys/class/gpio/gpio20/value
    echo ""
    rm -rf /tmp/mmdvmrpthatfirmware 2> /dev/null
    read -n 1 -s -r -p "Flashing your ${1} modem complete, press any key to reboot your Pi-Star System..."
    shutdown -r now
    exit 0
  ;;    
  *)
    # Un-recognised modem choice
    echo "Your Choice of ${1} modem is not supported by this update tool"
    exit 1
  ;;
  esac
fi

exit 0