CyberPower CST135UC2 supported by usbhid-ups

[neilwaybright]

CyberPower CST135UC2

upsc cyberpower1350
Init SSL without certificate database
battery.charge: 100
battery.charge.low: 10
battery.charge.warning: 20
battery.mfr.date: CPS
battery.runtime: 4875
battery.runtime.low: 300
battery.type: PbAcid
battery.voltage: 26.0
battery.voltage.nominal: 24
device.mfr: CPS
device.model: CST135UC2
device.serial: CDZNW7021381
device.type: ups
driver.name: usbhid-ups
driver.parameter.bus: 003
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 1
driver.parameter.port: auto
driver.parameter.productid: 0601
driver.parameter.synchronous: auto
driver.parameter.vendorid: 0764
driver.version: 2.8.0
driver.version.data: CyberPower HID 0.6
driver.version.internal: 0.47
driver.version.usb: libusb-1.0.26 (API: 0x1000109)
input.voltage: 117.0
input.voltage.nominal: 120
output.voltage: 117.0
ups.beeper.status: enabled
ups.delay.shutdown: 20
ups.delay.start: 30
ups.load: 10
ups.mfr: CPS
ups.model: CST135UC2
ups.productid: 0601
ups.realpower.nominal: 810
ups.serial: CDZNW7021381
ups.status: OL
ups.test.result: No test initiated
ups.timer.shutdown: -60
ups.timer.start: -60
ups.vendorid: 0764

I have been unable to remove power (plug is in a super-inconvenient place for me), but pulling the USB cable does result in a Communications failure/Communications Restored.

Manufacturer's Website (manuals are on downloads tab): https://www.cyberpowersystems.com/product/ups/battery-backup/cst135uc2/