Store: Buy Here
Getting Started: Click Here
The pinout of the LoPy4 is available as a PDF File
{% file src="../../.gitbook/assets/lopy4-pinout.pdf" caption="LoPy4 Pinout" %}
{% hint style="info" %} Please note that the PIN assignments for UART1 (TX1/RX1), SPI (CLK, MOSI, MISO) and I2C (SDA, SCL) are defaults and can be changed in Software. {% endhint %}
The datasheet of the LoPy4 is available as a PDF File.
{% file src="../../.gitbook/assets/lopy4-specsheet (1).pdf" caption="LoPy4 Datasheet" %}
By default, upon boot the LoPy4 will create a WiFi access point with the SSID lopy4-wlan-XXXX, where XXXX is a random 4-digit number, and the password www.pycom.io.
The RF switch that selects between the on-board and external antenna is connected to P12, for this reason using P12 should be avoided unless WiFi is disabled in your application.
The Vin pin on the LoPy4 can be supplied with a voltage ranging from 3.5v to 5.5v. The 3.3v pin on the other hand is output only, and must not be used to feed power into the LoPy4, otherwise the on-board regulator will be damaged.
Tutorials on how to the LoPy4 module can be found in the examples section of this documentation. The following tutorials might be of specific interest for the LoPy4: