RK628: soc_24M clk will be disabled, when probe success #322
Comments
friendlyarm
pushed a commit
to friendlyarm/kernel-rockchip
that referenced
this issue
Jan 8, 2025
[ Upstream commit c5d3f9b ] With below mount option and testcase, it hangs kernel. 1. mount -t f2fs -o compress_log_size=5 /dev/vdb /mnt/f2fs 2. touch /mnt/f2fs/file 3. chattr +c /mnt/f2fs/file 4. dd if=/dev/zero of=/mnt/f2fs/file bs=1MB count=1 5. sync 6. dd if=/dev/zero of=/mnt/f2fs/file bs=111 count=11 conv=notrunc 7. sync INFO: task sync:4788 blocked for more than 120 seconds. Not tainted 6.5.0-rc1+ rockchip-linux#322 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:sync state:D stack:0 pid:4788 ppid:509 flags:0x00000002 Call Trace: <TASK> __schedule+0x335/0xf80 schedule+0x6f/0xf0 wb_wait_for_completion+0x5e/0x90 sync_inodes_sb+0xd8/0x2a0 sync_inodes_one_sb+0x1d/0x30 iterate_supers+0x99/0xf0 ksys_sync+0x46/0xb0 __do_sys_sync+0x12/0x20 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 The reason is f2fs_all_cluster_page_ready() assumes that pages array should cover at least one cluster, otherwise, it will always return false, result in deadloop. By default, pages array size is 16, and it can cover the case cluster_size is equal or less than 16, for the case cluster_size is larger than 16, let's allocate memory of pages array dynamically. Fixes: 4c8ff70 ("f2fs: support data compression") Signed-off-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
scpcom
pushed a commit
to scpcom/linux
that referenced
this issue
Jan 20, 2025
commit 1cf1bd88f129f3bd647fead4dca270a5894274bb upstream. On Raspberry Pis without onboard USB hub frequent device reconnects can trigger a interrupt storm after DWC2 entered host clock gating. This is caused by a race between _dwc2_hcd_suspend() and the port interrupt, which sets port_connect_status. The issue occurs if port_connect_status is still 1, but there is no connection anymore: usb 1-1: USB disconnect, device number 25 dwc2 3f980000.usb: _dwc2_hcd_suspend: port_connect_status: 1 dwc2 3f980000.usb: Entering host clock gating. Disabling IRQ rockchip-linux#66 irq 66: nobody cared (try booting with the "irqpoll" option) CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.0-gc1bb81b13202-dirty rockchip-linux#322 Hardware name: BCM2835 Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x50/0x64 dump_stack_lvl from __report_bad_irq+0x38/0xc0 __report_bad_irq from note_interrupt+0x2ac/0x2f4 note_interrupt from handle_irq_event+0x88/0x8c handle_irq_event from handle_level_irq+0xb4/0x1ac handle_level_irq from generic_handle_domain_irq+0x24/0x34 generic_handle_domain_irq from bcm2836_chained_handle_irq+0x24/0x28 bcm2836_chained_handle_irq from generic_handle_domain_irq+0x24/0x34 generic_handle_domain_irq from generic_handle_arch_irq+0x34/0x44 generic_handle_arch_irq from __irq_svc+0x88/0xb0 Exception stack(0xc1d01f20 to 0xc1d01f68) 1f20: 0004ef3c 00000001 00000000 00000000 c1d09780 c1f6bb5c c1d04e54 c1c60ca8 1f40: c1d04e94 00000000 00000000 c1d092a8 c1f6af20 c1d01f70 c1211b98 c1212f40 1f60: 60000013 ffffffff __irq_svc from default_idle_call+0x1c/0xb0 default_idle_call from do_idle+0x21c/0x284 do_idle from cpu_startup_entry+0x28/0x2c cpu_startup_entry from kernel_init+0x0/0x12c handlers: [<e3a25c00>] dwc2_handle_common_intr [<58bf98a3>] usb_hcd_irq Disabling IRQ rockchip-linux#66 So avoid this by reading the connection status directly. Fixes: 113f86d ("usb: dwc2: Update partial power down entering by system suspend") Signed-off-by: Stefan Wahren <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
scpcom
pushed a commit
to scpcom/linux
that referenced
this issue
Jan 20, 2025
commit 1cf1bd88f129f3bd647fead4dca270a5894274bb upstream. On Raspberry Pis without onboard USB hub frequent device reconnects can trigger a interrupt storm after DWC2 entered host clock gating. This is caused by a race between _dwc2_hcd_suspend() and the port interrupt, which sets port_connect_status. The issue occurs if port_connect_status is still 1, but there is no connection anymore: usb 1-1: USB disconnect, device number 25 dwc2 3f980000.usb: _dwc2_hcd_suspend: port_connect_status: 1 dwc2 3f980000.usb: Entering host clock gating. Disabling IRQ rockchip-linux#66 irq 66: nobody cared (try booting with the "irqpoll" option) CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.0-gc1bb81b13202-dirty rockchip-linux#322 Hardware name: BCM2835 Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x50/0x64 dump_stack_lvl from __report_bad_irq+0x38/0xc0 __report_bad_irq from note_interrupt+0x2ac/0x2f4 note_interrupt from handle_irq_event+0x88/0x8c handle_irq_event from handle_level_irq+0xb4/0x1ac handle_level_irq from generic_handle_domain_irq+0x24/0x34 generic_handle_domain_irq from bcm2836_chained_handle_irq+0x24/0x28 bcm2836_chained_handle_irq from generic_handle_domain_irq+0x24/0x34 generic_handle_domain_irq from generic_handle_arch_irq+0x34/0x44 generic_handle_arch_irq from __irq_svc+0x88/0xb0 Exception stack(0xc1d01f20 to 0xc1d01f68) 1f20: 0004ef3c 00000001 00000000 00000000 c1d09780 c1f6bb5c c1d04e54 c1c60ca8 1f40: c1d04e94 00000000 00000000 c1d092a8 c1f6af20 c1d01f70 c1211b98 c1212f40 1f60: 60000013 ffffffff __irq_svc from default_idle_call+0x1c/0xb0 default_idle_call from do_idle+0x21c/0x284 do_idle from cpu_startup_entry+0x28/0x2c cpu_startup_entry from kernel_init+0x0/0x12c handlers: [<e3a25c00>] dwc2_handle_common_intr [<58bf98a3>] usb_hcd_irq Disabling IRQ rockchip-linux#66 So avoid this by reading the connection status directly. Fixes: 113f86d ("usb: dwc2: Update partial power down entering by system suspend") Signed-off-by: Stefan Wahren <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
scpcom
pushed a commit
to scpcom/linux
that referenced
this issue
Jan 20, 2025
commit 1cf1bd88f129f3bd647fead4dca270a5894274bb upstream. On Raspberry Pis without onboard USB hub frequent device reconnects can trigger a interrupt storm after DWC2 entered host clock gating. This is caused by a race between _dwc2_hcd_suspend() and the port interrupt, which sets port_connect_status. The issue occurs if port_connect_status is still 1, but there is no connection anymore: usb 1-1: USB disconnect, device number 25 dwc2 3f980000.usb: _dwc2_hcd_suspend: port_connect_status: 1 dwc2 3f980000.usb: Entering host clock gating. Disabling IRQ rockchip-linux#66 irq 66: nobody cared (try booting with the "irqpoll" option) CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.0-gc1bb81b13202-dirty rockchip-linux#322 Hardware name: BCM2835 Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x50/0x64 dump_stack_lvl from __report_bad_irq+0x38/0xc0 __report_bad_irq from note_interrupt+0x2ac/0x2f4 note_interrupt from handle_irq_event+0x88/0x8c handle_irq_event from handle_level_irq+0xb4/0x1ac handle_level_irq from generic_handle_domain_irq+0x24/0x34 generic_handle_domain_irq from bcm2836_chained_handle_irq+0x24/0x28 bcm2836_chained_handle_irq from generic_handle_domain_irq+0x24/0x34 generic_handle_domain_irq from generic_handle_arch_irq+0x34/0x44 generic_handle_arch_irq from __irq_svc+0x88/0xb0 Exception stack(0xc1d01f20 to 0xc1d01f68) 1f20: 0004ef3c 00000001 00000000 00000000 c1d09780 c1f6bb5c c1d04e54 c1c60ca8 1f40: c1d04e94 00000000 00000000 c1d092a8 c1f6af20 c1d01f70 c1211b98 c1212f40 1f60: 60000013 ffffffff __irq_svc from default_idle_call+0x1c/0xb0 default_idle_call from do_idle+0x21c/0x284 do_idle from cpu_startup_entry+0x28/0x2c cpu_startup_entry from kernel_init+0x0/0x12c handlers: [<e3a25c00>] dwc2_handle_common_intr [<58bf98a3>] usb_hcd_irq Disabling IRQ rockchip-linux#66 So avoid this by reading the connection status directly. Fixes: 113f86d ("usb: dwc2: Update partial power down entering by system suspend") Signed-off-by: Stefan Wahren <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
kernel/drivers/media/i2c/rk628/rk628_csi_v4l2.c
Line 2163 in 604cec4
In
rk628_csi_probe_offunction, when we got success in probe, theretvalue is0, but theclk_disable_unprepare(csi->soc_24M)still will be invoked. This will cause theenable_countofsoc_24Mminus 1.So if there is no other driver use soc_24M, the clock will be disable, and the the i2c comunication will be failed.
The text was updated successfully, but these errors were encountered: