configuration

[scottie]

How does one configure the IMAGE once they install, i boot it up, login and i cant even ping google.com
My other computers see the wirless network but have no internet. Internet works so i assume i need to configure this somehow ? seems documentation is lacking...

[MourIdri]

Same issue here. I set as Wifi "Router", I connected my phone to the new network and I cannot connect to internet.
So I tried to connect using SSH on my raspberry router and using "ifconfig", It got an IP address from my DSL box ( 192.168.1.XX) and my wlan0 192.18.1.1 .
I tried to ping www.google.fr .. nothing..

pi@raspberrypi:~ $ route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.1.254 0.0.0.0 UG 202 0 0 eth0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0
192.168.1.0 0.0.0.0 255.255.255.0 U 202 0 0 eth0
pi@raspberrypi:~ $ ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=58 time=24.5 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=58 time=23.6 ms