From 4a04286c05ab17ab307fd9ee9ca7dc1ae3d48167 Mon Sep 17 00:00:00 2001
From: Abdelwahab Kawafi <43846328+wahabk@users.noreply.github.com>
Date: Sun, 17 Mar 2024 10:40:52 +0000
Subject: [PATCH] infill

---
 docs/2_BOM.md | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/docs/2_BOM.md b/docs/2_BOM.md
index 71d3440..9075517 100644
--- a/docs/2_BOM.md
+++ b/docs/2_BOM.md
@@ -37,8 +37,6 @@
 
 All files are available in `3d_files/`. The parts can be printed in PLA but I prefer to use PETG. 
 
-All the parts are printed on an Ender 3. I usually have to sand down the edges due to stringing etc.
+All the parts are printed with 20% infill, and I use an Ender 3. I usually have to sand down the edges due to stringing etc.
 According to your printer's over/under extrusion you might have to sand down edges, or add silicon tape to the bolt heads so they key into the bodies.
-I personally prefer to use a brim.
-
-The only part that needs supports is the m2y pulley.
\ No newline at end of file
+I personally prefer to use a brim.
\ No newline at end of file