Based on NUCLEO-STM32F767ZI board. Using FreeRTOS and LWIP netconn API.
NTRIP process will start by default on power up. Use Blue user button to start/stop the NTRIP process.
LD1 (Yellow) indicate NTRIP client is running LD2 (Blue) will flash when receiving a message LD3 (Red) will flash on a separate thread
DHCP is enabled, on startup Red LED indicate address is not received. It will goes off when a valid ip is obtained.
Server address and mount points are manually write in the configuration sections.
Error will be print via SWO.
WIP: netconn does not send TCP RST when close