More support for M3 chips

The UART base has moved from the M2 chips. Everest settings introduce some changes to unknown registers The MCC data has changed as well. There is a drive-by change where I discovered what some of the unknown HID18 bits are and documented them. Signed-off-by: Daniel Berlin <[email protected]>
AsahiLinux · Dec 3, 2023 · c45da55 · c45da55
1 parent 9f846b1
commit c45da55
Show file tree

Hide file tree

Showing 11 changed files with 208 additions and 18 deletions.
diff --git a/Makefile b/Makefile
@@ -91,8 +91,10 @@ OBJECTS := \
 	chickens.o \
 	chickens_avalanche.o \
 	chickens_blizzard.o \
+	chickens_everest.o \
 	chickens_firestorm.o \
 	chickens_icestorm.o \
+	chickens_sawtooth.o \
 	clk.o \
 	cpufreq.o \
 	dapf.o \

diff --git a/src/chickens.c b/src/chickens.c
@@ -22,6 +22,8 @@
 #define MIDR_PART_T6020_AVALANCHE 0x35
 #define MIDR_PART_T6021_BLIZZARD  0x38
 #define MIDR_PART_T6021_AVALANCHE 0x39
+#define MIDR_PART_T6031_EVEREST   0x49
+#define MIDR_PART_T6031_SAWTOOTH  0x48
 
 #define MIDR_REV_LOW  GENMASK(3, 0)
 #define MIDR_PART     GENMASK(15, 4)
@@ -37,6 +39,8 @@ void init_t6020_blizzard(void);
 void init_t6020_avalanche(int rev);
 void init_t6021_blizzard(void);
 void init_t6021_avalanche(int rev);
+void init_t6031_sawtooth(void);
+void init_t6031_everest(int rev);
 
 const char *init_cpu(void)
 {
@@ -123,6 +127,16 @@ const char *init_cpu(void)
             init_t6021_blizzard();
             break;
 
+        case MIDR_PART_T6031_EVEREST:
+            cpu = "M3 Max Everest";
+            init_t6031_everest(rev);
+            break;
+
+        case MIDR_PART_T6031_SAWTOOTH:
+            cpu = "M3 Max Sawtooth";
+            init_t6031_sawtooth();
+            break;
+
         default:
             uart_puts("  Unknown CPU type");
             break;

diff --git a/src/chickens_avalanche.c b/src/chickens_avalanche.c
@@ -40,7 +40,8 @@ void init_t8112_avalanche(int rev)
 
     reg_mask(SYS_IMP_APL_HID3, HID3_DEV_PCIE_THROTTLE_LIMIT_MASK, HID3_DEV_PCIE_THROTTLE_LIMIT(60));
     reg_set(SYS_IMP_APL_HID3, HID3_DEV_PCIE_THROTTLE_ENABLE);
-    reg_set(SYS_IMP_APL_HID18, HID18_AVL_UNK27 | HID18_AVL_UNK29);
+    reg_set(SYS_IMP_APL_HID18,
+            HID18_GEXIT_EL_SPECULATION_DISABLE | HID18_GENTER_SPECULATION_DISABLE);
     reg_set(SYS_IMP_APL_HID16, HID16_AVL_UNK12);
 
     if (rev == 0) {
@@ -59,7 +60,8 @@ void init_t6020_avalanche(int rev)
 
     reg_mask(SYS_IMP_APL_HID3, HID3_DEV_PCIE_THROTTLE_LIMIT_MASK, HID3_DEV_PCIE_THROTTLE_LIMIT(62));
     reg_set(SYS_IMP_APL_HID3, HID3_DEV_PCIE_THROTTLE_ENABLE);
-    reg_set(SYS_IMP_APL_HID18, HID18_AVL_UNK27 | HID18_AVL_UNK29);
+    reg_set(SYS_IMP_APL_HID18,
+            HID18_GEXIT_EL_SPECULATION_DISABLE | HID18_GENTER_SPECULATION_DISABLE);
     reg_set(SYS_IMP_APL_HID16, HID16_AVL_UNK12);
 
     reg_mask(SYS_IMP_APL_HID5, HID5_BLZ_UNK_19_18_MASK, HID5_BLZ_UNK18);
@@ -73,7 +75,8 @@ void init_t6021_avalanche(int rev)
 
     reg_mask(SYS_IMP_APL_HID3, HID3_DEV_PCIE_THROTTLE_LIMIT_MASK, HID3_DEV_PCIE_THROTTLE_LIMIT(62));
     reg_set(SYS_IMP_APL_HID3, HID3_DEV_PCIE_THROTTLE_ENABLE);
-    reg_set(SYS_IMP_APL_HID18, HID18_AVL_UNK27 | HID18_AVL_UNK29);
+    reg_set(SYS_IMP_APL_HID18,
+            HID18_GEXIT_EL_SPECULATION_DISABLE | HID18_GENTER_SPECULATION_DISABLE);
     reg_set(SYS_IMP_APL_HID16, HID16_AVL_UNK12);
 
     reg_mask(SYS_IMP_APL_HID5, HID5_BLZ_UNK_19_18_MASK, HID5_BLZ_UNK19);

diff --git a/src/chickens_everest.c b/src/chickens_everest.c
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: MIT */
+
+#include "cpu_regs.h"
+#include "uart.h"
+#include "utils.h"
+static void init_common_everest(void)
+{
+    reg_set(SYS_IMP_APL_HID12, BIT(46));
+    reg_set(SYS_IMP_APL_HID3, BIT(63));
+    reg_mask(SYS_IMP_APL_HID3, GENMASK(ULONG(62), ULONG(56)), BIT(60) | BIT(59) | BIT(58));
+    reg_clr(SYS_IMP_APL_HID3, BIT(4));
+    reg_set(SYS_IMP_APL_HID9, BIT(17));
+    reg_mask(SYS_IMP_APL_HID13,
+             HID13_POST_OFF_CYCLES_MASK | HID13_POST_ON_CYCLES_MASK | HID13_PRE_CYCLES_MASK |
+                 HID13_GROUP0_FF1_DELAY_MASK | HID13_GROUP0_FF2_DELAY_MASK |
+                 HID13_GROUP0_FF3_DELAY_MASK | HID13_GROUP0_FF4_DELAY_MASK |
+                 HID13_GROUP0_FF5_DELAY_MASK | HID13_GROUP0_FF6_DELAY_MASK |
+                 HID13_GROUP0_FF7_DELAY_MASK | HID13_RESET_CYCLES_MASK,
+             HID13_POST_OFF_CYCLES(4) | HID13_POST_ON_CYCLES(5) | HID13_PRE_CYCLES(1) |
+                 HID13_GROUP0_FF1_DELAY(4) | HID13_GROUP0_FF2_DELAY(4) | HID13_GROUP0_FF3_DELAY(4) |
+                 HID13_GROUP0_FF4_DELAY(4) | HID13_GROUP0_FF5_DELAY(4) | HID13_GROUP0_FF6_DELAY(4) |
+                 HID13_GROUP0_FF7_DELAY(4) | HID13_RESET_CYCLES(0));
+    reg_set(SYS_IMP_APL_HID16, BIT(54));
+    reg_set(SYS_IMP_APL_HID18,
+            HID18_GEXIT_EL_SPECULATION_DISABLE | HID18_GENTER_SPECULATION_DISABLE);
+
+    msr(SYS_IMP_APL_HID26, HID26_GROUP1_OFFSET(0xF88F65588LL) | HID26_GROUP2_OFFSET(0x3F28));
+    reg_mask(SYS_IMP_APL_HID27,
+             GENMASK(43, 40) | GENMASK(39, 36) | GENMASK(35, 32) | GENMASK(31, 28) |
+                 GENMASK(27, 24) | GENMASK(23, 20) | GENMASK(19, 16) | GENMASK(15, 8) |
+                 GENMASK(7, 4) | GENMASK(3, 0),
+             BIT(40) | BIT(36) | BIT(32) | BIT(28) | BIT(24) | BIT(20) | BIT(16) | 0x2b00uL |
+                 BIT(4) | BIT(0));
+    /* This is new to M3 and i have no idea what it is yet */
+    reg_set(s3_0_c15_c2_3, BIT(3));
+    reg_clr(s3_0_c15_c2_4, BIT(0) | BIT(1) | BIT(16) | BIT(17) | BIT(18) | BIT(22));
+}
+
+void init_t6031_everest(int rev)
+{
+    UNUSED(rev);
+    msr(s3_1_c15_c1_5, 0x3uL);
+    msr(s3_4_c15_c14_6, 0x3uL);
+    init_common_everest();
+    reg_set(SYS_IMP_APL_HID4, HID4_ENABLE_LFSR_STALL_LOAD_PIPE2_ISSUE);
+}
diff --git a/src/chickens_firestorm.c b/src/chickens_firestorm.c
@@ -72,7 +72,7 @@ void init_t8103_firestorm(int rev)
         reg_set(SYS_IMP_APL_HID1, HID1_ENABLE_MDSB_STALL_PIPELINE_ECO | HID1_ENABLE_BR_KILL_LIMIT);
 
     if (rev >= 0x11)
-        reg_set(SYS_IMP_APL_HID18, HID18_SPAREBIT17);
+        reg_set(SYS_IMP_APL_HID18, HID18_PREF_REPLAY_DISABLE);
 }
 
 void init_t6000_firestorm(int rev)
@@ -88,7 +88,7 @@ void init_t6000_firestorm(int rev)
         reg_set(SYS_IMP_APL_HID4,
                 HID4_ENABLE_LFSR_STALL_LOAD_PIPE2_ISSUE | HID4_ENABLE_LFSR_STALL_STQ_REPLAY);
 
-        reg_set(SYS_IMP_APL_HID18, HID18_SPAREBIT17);
+        reg_set(SYS_IMP_APL_HID18, HID18_PREF_REPLAY_DISABLE);
     }
 }
 
@@ -108,6 +108,6 @@ void init_t6001_firestorm(int rev)
     if (rev >= 0x10) {
         reg_set(SYS_IMP_APL_HID1, HID1_ENABLE_BR_KILL_LIMIT);
 
-        reg_set(SYS_IMP_APL_HID18, HID18_SPAREBIT17);
+        reg_set(SYS_IMP_APL_HID18, HID18_PREF_REPLAY_DISABLE);
     }
 }
diff --git a/src/chickens_sawtooth.c b/src/chickens_sawtooth.c
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: MIT */
+
+#include "cpu_regs.h"
+#include "utils.h"
+
+static void init_common_sawtooth(void)
+{
+    reg_set(SYS_IMP_APL_EHID0, EHID0_BLI_UNK32);
+}
+
+void init_t6031_sawtooth(void)
+{
+    init_common_sawtooth();
+
+    reg_mask(SYS_IMP_APL_EHID9, EHID9_DEV_2_THROTTLE_LIMIT_MASK, EHID9_DEV_2_THROTTLE_LIMIT(62));
+    reg_set(SYS_IMP_APL_EHID9, EHID9_DEV_2_THROTTLE_ENABLE);
+    reg_set(SYS_IMP_APL_EHID18, EHID18_BLZ_UNK34);
+
+    reg_mask(SYS_IMP_APL_HID5, HID5_BLZ_UNK_19_18_MASK, HID5_BLZ_UNK19);
+}
diff --git a/src/cpu_regs.h b/src/cpu_regs.h
@@ -299,6 +299,8 @@
 #define HID11_ENABLE_FIX_UC_55719865 BIT(15)
 #define HID11_DISABLE_LD_NT_WIDGET   BIT(59)
 
+#define SYS_IMP_APL_HID12 sys_reg(3, 0, 15, 12, 0)
+
 #define SYS_IMP_APL_HID13           sys_reg(3, 0, 15, 14, 0)
 #define HID13_POST_OFF_CYCLES(x)    ((ULONG(x)))
 #define HID13_POST_OFF_CYCLES_MASK  GENMASK(6, 0)
@@ -333,12 +335,12 @@
 #define HID16_ENABLE_MPX_PICK_45  BIT(61)
 #define HID16_ENABLE_MP_CYCLONE_7 BIT(62)
 
-#define SYS_IMP_APL_HID18             sys_reg(3, 0, 15, 11, 2)
-#define HID18_HVC_SPECULATION_DISABLE BIT(14)
-#define HID18_AVL_UNK27               BIT(27)
-#define HID18_AVL_UNK29               BIT(29)
-#define HID18_SPAREBIT7               BIT(39)
-#define HID18_SPAREBIT17              BIT(49)
+#define SYS_IMP_APL_HID18                  sys_reg(3, 0, 15, 11, 2)
+#define HID18_HVC_SPECULATION_DISABLE      BIT(14)
+#define HID18_GEXIT_EL_SPECULATION_DISABLE BIT(27)
+#define HID18_GENTER_SPECULATION_DISABLE   BIT(29)
+#define HID18_BTP_BRN_DISABLE              BIT(39)
+#define HID18_PREF_REPLAY_DISABLE          BIT(49)
 
 #define SYS_IMP_APL_EHID18 sys_reg(3, 0, 15, 11, 3)
 #define EHID18_BLZ_UNK34   BIT(34)
@@ -401,11 +403,12 @@
 #define EHID20_FORCE_NONSPEC_TARGETED_TIMER_SEL(x)                    ((ULONG(x)) << 21)
 #define EHID20_FORCE_NONSPEC_TARGETED_TIMER_SEL_MASK                  (3UL << 21)
 
-#define SYS_IMP_APL_HID21                            sys_reg(3, 0, 15, 1, 3)
+#define SYS_IMP_APL_HID21 sys_reg(3, 0, 15, 1, 3)
+// In 6031's, this is marked as "wfi_full_quis"
 #define HID21_ENABLE_LDREX_FILL_REPLY                BIT(19)
-#define HID21_LDQ_RTR_WAIT_FOR_OLD_ST_REL_COMPLETION BIT(33)
-#define HID21_DISABLE_CDP_REPLY_PURGED_TRANSACTION   BIT(34)
-#define HID21_AVL_UNK52                              BIT(52)
+#define HID21_LDQ_RTR_WAIT_FOR_OLD_ST_REL_COMPLETION BIT(34)
+#define HID21_DISABLE_CDP_REPLY_PURGED_TRANSACTION   BIT(35)
+#define HID21_PURGE_MMU_ON_ANY_SPR_SYNC              BIT(52)
 
 #define SYS_IMP_APL_HID26        sys_reg(3, 0, 15, 0, 3)
 #define HID26_GROUP1_OFFSET(x)   ((ULONG(x)) << 0)
@@ -617,3 +620,7 @@
 #define IPI_SR_PENDING         BIT(0)
 
 #define SYS_IMP_APL_IPI_CR_EL1 sys_reg(3, 5, 15, 3, 1)
+
+/* Lockdown registers */
+#define SYS_IMP_APL_SPR_LOCKDOWN_EL2 sys_reg(3, 4, 15, 0, 5)
+#define SYS_IMP_APL_SPR_LOCKDOWN_EL1 sys_reg(3, 4, 15, 0, 6)
diff --git a/src/main.c b/src/main.c
@@ -113,7 +113,6 @@ void run_actions(void)
         printf("Valid payload found\n");
         return;
     }
-
     fb_set_active(true);
 
     printf("No valid payload found\n");

diff --git a/src/mcc.c b/src/mcc.c
@@ -23,6 +23,12 @@ static bool mcc_initialized = false;
 #define T6000_DCS_STRIDE    0x100000
 #define T6000_DCS_COUNT     4
 
+#define T6031_PLANE_OFFSET  0
+#define T6031_PLANE_STRIDE  0x40000
+#define T6031_GLOBAL_OFFSET 0x100000
+#define T6031_DCS_OFFSET    0x400000
+#define T6031_DCS_STRIDE    0x200000
+
 #define PLANE_TZ_MAX_REGS 4
 
 struct tz_regs {
@@ -49,6 +55,14 @@ struct tz_regs t602x_tz_regs = {
     .enable = 0x6c8,
 };
 
+struct tz_regs t603x_tz_regs = {
+    .count = 4,
+    .stride = 0x14,
+    .start = 0x6d8,
+    .end = 0x6dc,
+    .enable = 0x6e4,
+};
+
 #define PLANE_CACHE_ENABLE 0x1c00
 #define PLANE_CACHE_STATUS 0x1c04
 
@@ -64,6 +78,12 @@ struct tz_regs t602x_tz_regs = {
     (FIELD_PREP(T6000_CACHE_STATUS_DATA_COUNT, T6000_CACHE_WAYS) |                                 \
      FIELD_PREP(T6000_CACHE_STATUS_TAG_COUNT, T6000_CACHE_WAYS))
 
+#define T6031_CACHE_WAYS        12
+#define T6031_CACHE_STATUS_MASK (T6000_CACHE_STATUS_DATA_COUNT | T6000_CACHE_STATUS_TAG_COUNT)
+#define T6031_CACHE_STATUS_VAL                                                                     \
+    (FIELD_PREP(T6000_CACHE_STATUS_DATA_COUNT, T6031_CACHE_WAYS) |                                 \
+     FIELD_PREP(T6000_CACHE_STATUS_TAG_COUNT, T6031_CACHE_WAYS))
+
 #define T8103_CACHE_WAYS        16
 #define T8103_CACHE_STATUS_MASK (T8103_CACHE_STATUS_DATA_COUNT | T8103_CACHE_STATUS_TAG_COUNT)
 #define T8103_CACHE_STATUS_VAL                                                                     \
@@ -134,6 +154,8 @@ int mcc_enable_cache(void)
     if (!mcc_initialized)
         return -1;
 
+    /* The 6030 memory controller supports setting a waymask, but the desktop chips do not appear to
+       use it */
     for (int mcc = 0; mcc < mcc_count; mcc++) {
         for (int plane = 0; plane < mcc_regs[mcc].plane_count; plane++) {
             plane_write32(mcc, plane, PLANE_CACHE_ENABLE, mcc_regs[mcc].cache_enable_val);
@@ -161,7 +183,12 @@ int mcc_unmap_carveouts(void)
 
     mcc_carveout_count = 0;
     memset(mcc_carveouts, 0, sizeof mcc_carveouts);
+
     // All MCCs and planes should have identical configs
+    // Note: For unhandled machines, the TZ regions can be found (on m1, m2, m3) by looking at
+    // region-id-2 and region-id-4 on a booted macos, in the /chosen/carveout-memory-map DT node.
+    // This can be used along with dumping the mcc reg space to find the correct start/end/enable
+    // above.
     for (u32 i = 0; i < mcc_regs[0].tz->count; i++) {
         uint64_t off = mcc_regs[0].tz->stride * i;
         uint64_t start = plane_read32(0, 0, mcc_regs[0].tz->start + off);
@@ -291,6 +318,72 @@ int mcc_init_t6000(int node, int *path, bool t602x)
     return 0;
 }
 
+int mcc_init_t6031(int node, int *path)
+{
+    u32 reg_len;
+    u32 reg_offset = 3;
+
+    if (!adt_getprop(adt, node, "reg", &reg_len)) {
+        printf("MCC: Failed to get reg property!\n");
+        return -1;
+    }
+
+    mcc_count = reg_len / 16 - reg_offset;
+
+    printf("MCC: Initializing T6031 MCCs (%d instances)...\n", mcc_count);
+
+    if (mcc_count > MAX_MCC_INSTANCES) {
+        printf("MCC: Too many instances, increase MAX_MCC_INSTANCES!\n");
+        mcc_count = MAX_MCC_INSTANCES;
+    }
+
+    u32 plane_count = 0;
+    u32 dcs_count = 0;
+
+    if (!ADT_GETPROP(adt, node, "dcs-count-per-amcc", &dcs_count)) {
+        printf("MCC: Failed to get dcs count!\n");
+        return -1;
+    }
+
+    if (!ADT_GETPROP(adt, node, "plane-count-per-amcc", &plane_count)) {
+        printf("MCC: Failed to get plane count!\n");
+        return -1;
+    }
+
+    for (int i = 0; i < mcc_count; i++) {
+        u64 base;
+        if (adt_get_reg(adt, path, "reg", i + reg_offset, &base, NULL)) {
+            printf("MCC: Failed to get reg index %d!\n", i + reg_offset);
+            return -1;
+        }
+
+        mcc_regs[i].plane_base = base + T6031_PLANE_OFFSET;
+        mcc_regs[i].plane_stride = T6031_PLANE_STRIDE;
+        mcc_regs[i].plane_count = plane_count;
+
+        mcc_regs[i].global_base = base + T6031_GLOBAL_OFFSET;
+
+        mcc_regs[i].dcs_base = base + T6031_DCS_OFFSET;
+        mcc_regs[i].dcs_stride = T6031_DCS_STRIDE;
+        mcc_regs[i].dcs_count = dcs_count;
+
+        mcc_regs[i].cache_enable_val = 1;
+        mcc_regs[i].cache_ways = T6031_CACHE_WAYS;
+        mcc_regs[i].cache_status_mask = T6031_CACHE_STATUS_MASK;
+        mcc_regs[i].cache_status_val = T6031_CACHE_STATUS_VAL;
+        mcc_regs[i].cache_disable = 0;
+
+        mcc_regs[i].tz = &t603x_tz_regs;
+    }
+
+    printf("MCC: Initialized T6031 MCCs (%d instances, %d planes, %d channels)\n", mcc_count,
+           mcc_regs[0].plane_count, mcc_regs[0].dcs_count);
+
+    mcc_initialized = true;
+
+    return 0;
+}
+
 int mcc_init(void)
 {
     int path[8];
@@ -309,8 +402,10 @@ int mcc_init(void)
         return mcc_init_t6000(node, path, false);
     } else if (adt_is_compatible(adt, node, "mcc,t6020")) {
         return mcc_init_t6000(node, path, true);
+    } else if (adt_is_compatible(adt, node, "mcc,t6031")) {
+        return mcc_init_t6031(node, path);
     } else {
-        printf("MCC: Unsupported version\n");
+        printf("MCC: Unsupported version:%s\n", adt_get_property(adt, node, "compatible")->value);
         return -1;
     }
 }
diff --git a/src/soc.h b/src/soc.h
@@ -26,6 +26,8 @@
 #define EARLY_UART_BASE 0x39b200000
 #elif TARGET == T8112
 #define EARLY_UART_BASE 0x235200000
+#elif TARGET == T6034 || TARGET == T6031
+#define EARLY_UART_BASE 0x391200000
 #endif
 
 #endif

diff --git a/tools/apple_regs.json b/tools/apple_regs.json
@@ -29,6 +29,8 @@
     {"index": 0, "name": "EHID18_EL1",                  "fullname": "Hardware Implementation-Dependent Register 18 (E-core)",       "enc": [3, 0, 15, 11, 3 ], "width": 64},
     {"index": 0, "name": "EHID20_EL1",                  "fullname": "Hardware Implementation-Dependent Register 20 (E-core)",       "enc": [3, 0, 15, 1, 2  ], "width": 64},
     {"index": 0, "name": "HID21_EL1",                   "fullname": "Hardware Implementation-Dependent Register 21",                "enc": [3, 0, 15, 1, 3  ], "width": 64},
+    {"index": 0, "name": "HID26_EL1",                   "fullname": "Hardware Implementation-Dependent Register 26",                "enc": [3, 0, 15, 0, 3  ], "width": 64},
+    {"index": 0, "name": "HID27_EL1",                   "fullname": "Hardware Implementation-Dependent Register 27",                "enc": [3, 0, 15, 0, 4  ], "width": 64},
     {"index": 0, "name": "PMCR0_EL1",                   "fullname": "Performance Monitor Control Register 0",                       "enc": [3, 1, 15, 0, 0  ], "width": 64,
         "fieldsets": [{"fields": [
             {"name": "PMC0_EN",                         "msb": 0, "lsb": 0},
-Original file line number
+Diff line change
@@ Expand Up / @@ -113,7 +113,6 @@ void run_actions(void) @@
             printf("Valid payload found\n");
             return;
         }
         fb_set_active(true);
         printf("No valid payload found\n");
@@ Expand Down @@