linkchecker

Signed-off-by: Filip Lewiński <[email protected]>

docs/transparent-validation/muxpi/basic-validation.md

@@ -250,4 +250,4 @@ Minicom quick guide:
 
 ---
 
-_Images source: [Wiki Tizen](https://wiki.tizen.org/MuxPi)_
+_Images source: [Wiki Tizen](http://web.archive.org/web/20230702190152/https://wiki.tizen.org/MuxPi)_

docs/transparent-validation/muxpi/theory-of-operations.md

@@ -565,10 +565,10 @@ uart --- Get current value of UART voltage or set if new value is given [in mill
 
 ---
 
-_Images source: [Wiki Tizen](https://wiki.tizen.org/MuxPi)_
+_Images source: [Wiki Tizen](http://web.archive.org/web/20230702190152/https://wiki.tizen.org/MuxPi)_
 
 [nanopi-image]: https://cloud.3mdeb.com/index.php/s/MENgScifExeeo6P/download
 [nanopi-image2]: https://cloud.3mdeb.com/index.php/s/n42rLcAQ5cWcxgW/download
 [cortex-binary]: https://cloud.3mdeb.com/index.php/s/adnEZLgo2diXkdw/download
 [etcher]: https://www.balena.io/etcher/
-[usb-m]: https://wiki.tizen.org/MuxPi#USB-M
+[usb-m]: http://web.archive.org/web/20230702190152/https://wiki.tizen.org/MuxPi#USB-M

docs/transparent-validation/sd-wire/faq.md

@@ -23,7 +23,7 @@ remote DSLR camera.
 For additional details please refer to the official documentation:
 
 * [Dasharo Universe](https://docs.dasharo.com/transparent-validation/sd-wire/getting-started/)
-* [Tizen Wiki](https://wiki.tizen.org/SDWire)
+* [Tizen Wiki](http://web.archive.org/web/20240121081917/https://wiki.tizen.org/SDWire)
 
 These resources will provide you with comprehensive guidance on how to make the
 most of the product for your specific needs.

docs/transparent-validation/sd-wire/specification.md

@@ -1,6 +1,8 @@
 # Hardware design
 
-Design of this board is based on [SD MUX](https://wiki.tizen.org/SD_MUX). SDWire
+Design of this board is based on
+[SD MUX](http://web.archive.org/web/20220812002642/https://wiki.tizen.org/SD_MUX)
+. SDWire
 does not have power switch or USB switch but has built in USB SD card reader. SD
 card multiplexer itself is exactly the same in both devices.
 
@@ -20,7 +22,7 @@ LED positions are showed in the image below.
 
 ![](./../../images/SD-wire_leds.jpg)
 
-<center>Source: [wiki.tizen.org](https://wiki.tizen.org/File:SDWire-leds.png)</center>
+<center>Source: [wiki.tizen.org](http://web.archive.org/web/20210831025540/https://wiki.tizen.org/File:SDWire-leds.png)</center>
 
 ## PCB elements and scheme
 
@@ -30,4 +32,4 @@ LED positions are showed in the image below.
 
 ![](./../../images/SD-wire_scheme-1.png)
 
-<center>Source: [wiki.tizen.org](https://wiki.tizen.org/images/c/cb/SDWire-v1.4-sch.pdf)</center>
+<center>Source: [wiki.tizen.org](http://web.archive.org/web/20210831025540/https://wiki.tizen.org/images/c/cb/SDWire-v1.4-sch.pdf)</center>

docs/transparent-validation/sd-wire/usage-validation.md

@@ -276,7 +276,7 @@ Using SDWire there is no need to disconnect SD card from DUT.
 
 References & Projects:
 
-* [https://wiki.tizen.org/SDWire](https://wiki.tizen.org/SDWire)
+* [Tizen Wiki](http://web.archive.org/web/20240121081917/https://wiki.tizen.org/SDWire)
 * [Ethernet camera module build – Automated flashing](https://www.kurokesu.com/main/2022/08/02/ethernet-camera-module-build-log-5-automated-flashing/)
 * [SD Wire & 3d Printer Usage](https://github.com/arekm/OctoPrint-Sdwire)
 

docs/unified-test-documentation/generic-testing-stand-setup.md

@@ -63,7 +63,7 @@ documentation when in doubt.
 
 #### Prerequisites
 
-* [Prepared RTE](../../transparent-validation/rte/v1.1.0/quick-start-guide.md)
+* [Prepared RTE](../transparent-validation/rte/v1.1.0/quick-start-guide.md)
 * SOIC-8 Pomona clip (if applicable)
 * 6x female-female wire cables
 
@@ -79,7 +79,7 @@ for setting up a Pomona clip connection:
     ![](../images/pomona_clip.jpg)
     ![](../images/pomona_clip_with_cables.jpg)
 
-1. Connect the Pomona clip to the [SPI header](../../transparent-validation/rte/v1.1.0/specification.md)
+1. Connect the Pomona clip to the [SPI header](../transparent-validation/rte/v1.1.0/specification.md)
    on RTE.
 
     | SPI header | Pomona clip  |