1.17.3-farmbot.3

VERSION

@@ -1 +1 @@
-1.17.3-farmbot.2
+1.17.3-farmbot.3

nerves_defconfig

@@ -22,6 +22,7 @@ BR2_INIT_NONE=y
 BR2_ROOTFS_DEVICE_TABLE="${BR2_EXTERNAL_NERVES_PATH}/board/nerves-common/device_table.txt"
 BR2_ENABLE_LOCALE_WHITELIST="locale-archive"
 BR2_GENERATE_LOCALE="en_US.UTF-8"
+BR2_ROOTFS_USERS_TABLES="${NERVES_DEFCONFIG_DIR}/users_table.txt"
 BR2_ROOTFS_OVERLAY="${BR2_EXTERNAL_NERVES_PATH}/board/nerves-common/rootfs_overlay ${NERVES_DEFCONFIG_DIR}/rootfs_overlay"
 BR2_ROOTFS_POST_BUILD_SCRIPT="${NERVES_DEFCONFIG_DIR}/post-build.sh ${BR2_EXTERNAL_NERVES_PATH}/board/nerves-common/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="${NERVES_DEFCONFIG_DIR}/post-createfs.sh"
@@ -39,6 +40,8 @@ BR2_PACKAGE_ALSA_UTILS=y
 # BR2_PACKAGE_ALSA_UTILS_ALSAMIXER is not set
 BR2_PACKAGE_ALSA_UTILS_AMIXER=y
 BR2_PACKAGE_ALSA_UTILS_APLAY=y
+BR2_PACKAGE_ESPEAK=y
+BR2_PACKAGE_ESPEAK_AUDIO_BACKEND_ALSA=y
 BR2_PACKAGE_F2FS_TOOLS=y
 BR2_PACKAGE_MESA3D=y
 BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SWRAST=y
@@ -49,6 +52,7 @@ BR2_PACKAGE_RPI_FIRMWARE=y
 BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI4=y
 BR2_PACKAGE_RPI_FIRMWARE_CUSTOM_VERSION="1.20211007"
 BR2_PACKAGE_RPI_FIRMWARE_X=y
+BR2_PACKAGE_AVRDUDE=y
 BR2_PACKAGE_PIGPIO=y
 # BR2_PACKAGE_RNG_TOOLS_JITTERENTROPY_LIBRARY is not set
 BR2_PACKAGE_RPI_USERLAND=y
@@ -69,7 +73,9 @@ BR2_PACKAGE_WPA_SUPPLICANT_HOTSPOT=y
 BR2_PACKAGE_WPA_SUPPLICANT_DEBUG_SYSLOG=y
 BR2_PACKAGE_WPA_SUPPLICANT_WPS=y
 BR2_PACKAGE_WPA_SUPPLICANT_WPA3=y
-BR2_PACKAGE_WPA_SUPPLICANT_CTRL_IFACE=y
+BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
+BR2_PACKAGE_WPA_SUPPLICANT_WPA_CLIENT_SO=y
+BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_NERVES_SYSTEM_NAME="farmbot_system_rpi4"
 BR2_NERVES_ADDITIONAL_IMAGE_FILES="${NERVES_DEFCONFIG_DIR}/fwup.conf ${NERVES_DEFCONFIG_DIR}/cmdline.txt ${NERVES_DEFCONFIG_DIR}/config.txt"

rootfs_overlay/etc/erlinit.config

@@ -9,8 +9,8 @@
 
 # Specify where erlinit should send the IEx prompt. Only one may be enabled at
 # a time.
-#-c ttyS0     # UART pins on the GPIO connector
--c tty1      # HDMI output
+-c ttyS0     # UART pins on the GPIO connector
+# -c tty1      # HDMI output
 
 # If more than one tty are available, always warn if the user is looking at the
 # wrong one.