Update qla2x00t-32gbit to Linux Kernel v6.13 #269
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Current abort of bsg on timeout prematurely clears the outstanding_cmds[]. Abort does not allow FW to return the IOCB/SRB. In addition, bsg_job_done() is not called to return the BSG (i.e. leak). Abort the outstanding bsg/SRB and wait for the completion. The completion IOCB will wake up the bsg_timeout thread. If abort is not successful, then driver will forcibly call bsg_job_done() and free the srb. Err Inject: - qaucli -z - assign CT Passthru IOCB's NportHandle with another initiator nport handle to trigger timeout. Remote port will drop CT request. - bsg_job_done is properly called as part of cleanup kernel: qla2xxx [0000:21:00.1]-7012:7: qla2x00_process_ct : 286 : Error Inject. kernel: qla2xxx [0000:21:00.1]-7016:7: bsg rqst type: FC_BSG_HST_CT else type: 101 - loop-id=1 portid=fffffa. kernel: qla2xxx [0000:21:00.1]-70bb:7: qla24xx_bsg_timeout CMD timeout. bsg ptr ffff9971a42f0838 msgcode 80000004 vendor cmd fa010000 kernel: qla2xxx [0000:21:00.1]-507c:7: Abort command issued - hdl=4b, type=5 kernel: qla2xxx [0000:21:00.1]-5040:7: ELS-CT pass-through-ct pass-through error hdl=4b comp_status-status=0x5 error subcode 1=0x0 error subcode 2=0xaf882e80. kernel: qla2xxx [0000:21:00.1]-7009:7: qla2x00_bsg_job_done: sp hdl 4b, result=70000 bsg ptr ffff9971a42f0838 kernel: qla2xxx [0000:21:00.1]-802c:7: Aborting bsg ffff9971a42f0838 sp=ffff99760b87ba80 handle=4b rval=0 kernel: qla2xxx [0000:21:00.1]-708a:7: bsg abort success. bsg ffff9971a42f0838 sp=ffff99760b87ba80 handle=0x4b kernel: qla2xxx [0000:21:00.1]-7012:7: qla2x00_process_ct : 286 : Error Inject. kernel: qla2xxx [0000:21:00.1]-7016:7: bsg rqst type: FC_BSG_HST_CT else type: 101 - loop-id=1 portid=fffffa. kernel: qla2xxx [0000:21:00.1]-70bb:7: qla24xx_bsg_timeout CMD timeout. bsg ptr ffff9971a42f43b8 msgcode 80000004 vendor cmd fa010000 kernel: qla2xxx [0000:21:00.1]-7012:7: qla_bsg_found : 2206 : Error Inject 2. kernel: qla2xxx [0000:21:00.1]-802c:7: Aborting bsg ffff9971a42f43b8 sp=ffff99762c304440 handle=5e rval=5 kernel: qla2xxx [0000:21:00.1]-704f:7: bsg abort fail. bsg=ffff9971a42f43b8 sp=ffff99762c304440 rval=5. kernel: qla2xxx [0000:21:00.1]-7051:7: qla_bsg_found bsg_job_done : bsg ffff9971a42f43b8 result 0xfffffffa sp ffff99762c304440. Cc: [email protected] Fixes: c449b4198701 ("scsi: qla2xxx: Use QP lock to search for bsg") Signed-off-by: Quinn Tran <[email protected]> Signed-off-by: Nilesh Javali <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Himanshu Madhani <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> [ commit c423263082ee upstream ]
System crash is observed with stack trace warning of use after free. There are 2 signals to tell dpc_thread to terminate (UNLOADING flag and kthread_stop). On setting the UNLOADING flag when dpc_thread happens to run at the time and sees the flag, this causes dpc_thread to exit and clean up itself. When kthread_stop is called for final cleanup, this causes use after free. Remove UNLOADING signal to terminate dpc_thread. Use the kthread_stop as the main signal to exit dpc_thread. [596663.812935] kernel BUG at mm/slub.c:294! [596663.812950] invalid opcode: 0000 [#1] SMP PTI [596663.812957] CPU: 13 PID: 1475935 Comm: rmmod Kdump: loaded Tainted: G IOE --------- - - 4.18.0-240.el8.x86_64 #1 [596663.812960] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 08/20/2012 [596663.812974] RIP: 0010:__slab_free+0x17d/0x360 ... [596663.813008] Call Trace: [596663.813022] ? __dentry_kill+0x121/0x170 [596663.813030] ? _cond_resched+0x15/0x30 [596663.813034] ? _cond_resched+0x15/0x30 [596663.813039] ? wait_for_completion+0x35/0x190 [596663.813048] ? try_to_wake_up+0x63/0x540 [596663.813055] free_task+0x5a/0x60 [596663.813061] kthread_stop+0xf3/0x100 [596663.813103] qla2x00_remove_one+0x284/0x440 [qla2xxx] Cc: [email protected] Signed-off-by: Quinn Tran <[email protected]> Signed-off-by: Nilesh Javali <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Himanshu Madhani <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> [ commit 07c903db0a2f upstream ]
Firmware supports multiple sg_cnt for request and response for CT commands, so remove the redundant check. A check is there where sg_cnt for request and response should be same. This is not required as driver and FW have code to handle multiple and different sg_cnt on request and response. Cc: [email protected] Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: Nilesh Javali <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Himanshu Madhani <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> [ commit 833c70e212fc upstream ]
NVMe controller fails to send connect command due to failure to locate
hw context buffer for NVMe queue 0 (blk_mq_hw_ctx, hctx_idx=0). The
cause of the issue is NPIV host did not initialize the vha->irq_offset
field. This field is given to blk-mq (blk_mq_pci_map_queues) to help
locate the beginning of IO Queues which in turn help locate NVMe queue
0.
Initialize this field to allow NVMe to work properly with NPIV host.
kernel: nvme nvme5: Connect command failed, errno: -18
kernel: nvme nvme5: qid 0: secure concatenation is not supported
kernel: nvme nvme5: NVME-FC{5}: create_assoc failed, assoc_id 2e9100 ret 401
kernel: nvme nvme5: NVME-FC{5}: reset: Reconnect attempt failed (401)
kernel: nvme nvme5: NVME-FC{5}: Reconnect attempt in 2 seconds
Cc: [email protected]
Fixes: f0783d43dde4 ("scsi: qla2xxx: Use correct number of vectors for online CPUs")
Signed-off-by: Quinn Tran <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
[ commit 4812b7796c14 upstream ]
The fc_function_template for vports was missing the .show_host_supported_speeds. The base port had the same. Add .show_host_supported_speeds to the vport template as well. Cc: [email protected] Fixes: 2c3dfe3f6ad8 ("[SCSI] qla2xxx: add support for NPIV") Signed-off-by: Anil Gurumurthy <[email protected]> Signed-off-by: Nilesh Javali <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Himanshu Madhani <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> [ commit e4e268f898c8 upstream ]
Signed-off-by: Nilesh Javali <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Himanshu Madhani <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> [ commit 35002a8ec557 upstream ]
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.