60fps + Uncap FPS v2. Softlock Fix

Princess Peach Showtime!/[01007A3009184000]/60fps/readme.md

@@ -0,0 +1,43 @@
+**On 03/23/2024 we found an issue regarding The Case of the Rainy-Day Plot Stage** so I have replaced the previous 60FPS + Uncap FPS mods. 
+
+Below you will find **Ryujinx instructions only** on how to use this mod and how to fix the issue.
+
+Remember that the game in other emulators doesn't work properly and has crashes. However, these same instructions can be applied to these emulators.
+
+## Video Tutorial
+
+You can find the videotutorial [HERE](https://youtu.be/7v0XRf6j-8s?si=0Vdmla8BQeEfz0NK)
+
+## Ryujinx Instructions
+
+Once you have downloaded the mod and extracted it into the corresponding mod directory, you will do the following:
+
+1. Right click on the game and then click on Manage Mods. Check that you have enabled the mods as shown in the following screenshot:
+
+![image](https://i.imgur.com/reXNkyY.png)
+
+Once this check is done, click on Save.
+
+2. Again, right click on the game and then click on Manage Cheats. Check that you have enabled the cheats as shown in the following screenshot:
+
+![image](https://i.imgur.com/cNA9Oxa.png)
+
+Once this check is done, click on Save.
+
+Now, go to your mods directory folder. You will find that a new folder called cheats has been created. Inside you will find a file called enabled.txt.
+
+If you open it, you will know which cheats you have enabled.
+
+![image](https://i.imgur.com/V1Nmi47.png)
+
+3. When you find a softlock like the one that occurs in The Case of the Rainy-Day Plot you will do the following: 
+
+- **Press ZL + Dpad Down** while the softlock happens. Here's a [picture of this combination for dummies](https://i.imgur.com/DNJWvIE.png)
+
+This will cause the FPS to drop for a few seconds while holding down the combination. Once the softlock is solved, stop pressing the combination and continue playing as you normally would.
+
+## Alternative to ZL + Dpad Down
+
+You can **use RivaTuner** to cap the FPS to 30 and then remove the cap.
+
+[Here is a video](https://youtu.be/fvgSMt7Wfao?si=i-SyH61vOiQ0iGZX) where I explain how to do this.

Princess Peach Showtime!/[01007A3009184000]/Uncap FPS/readme.md

@@ -0,0 +1,43 @@
+**On 03/23/2024 we found an issue regarding The Case of the Rainy-Day Plot Stage** so I have replaced the previous 60FPS + Uncap FPS mods. 
+
+Below you will find **Ryujinx instructions only** on how to use this mod and how to fix the issue.
+
+Remember that the game in other emulators doesn't work properly and has crashes. However, these same instructions can be applied to these emulators.
+
+## Video Tutorial
+
+You can find the videotutorial [HERE](https://youtu.be/7v0XRf6j-8s?si=0Vdmla8BQeEfz0NK)
+
+## Ryujinx Instructions
+
+Once you have downloaded the mod and extracted it into the corresponding mod directory, you will do the following:
+
+1. Right click on the game and then click on Manage Mods. Check that you have enabled the mods as shown in the following screenshot:
+
+![image](https://i.imgur.com/reXNkyY.png)
+
+Once this check is done, click on Save.
+
+2. Again, right click on the game and then click on Manage Cheats. Check that you have enabled the cheats as shown in the following screenshot:
+
+![image](https://i.imgur.com/cNA9Oxa.png)
+
+Once this check is done, click on Save.
+
+Now, go to your mods directory folder. You will find that a new folder called cheats has been created. Inside you will find a file called enabled.txt.
+
+If you open it, you will know which cheats you have enabled.
+
+![image](https://i.imgur.com/V1Nmi47.png)
+
+3. When you find a softlock like the one that occurs in The Case of the Rainy-Day Plot you will do the following: 
+
+- **Press ZL + Dpad Down** while the softlock happens. Here's a [picture of this combination for dummies](https://i.imgur.com/DNJWvIE.png)
+
+This will cause the FPS to drop for a few seconds while holding down the combination. Once the softlock is solved, stop pressing the combination and continue playing as you normally would.
+
+## Alternative to ZL + Dpad Down
+
+You can **use RivaTuner** to cap the FPS to 30 and then remove the cap.
+
+[Here is a video](https://youtu.be/fvgSMt7Wfao?si=i-SyH61vOiQ0iGZX) where I explain how to do this.

Princess Peach Showtime!/[01007A3009184000]/readme.md

@@ -1,6 +1,6 @@
 **TitleID: 01007A3009184000**
 
-**Version supported: 1.0.0**
+**Versions supported: 1.0.0**
 
 **1.0.0 BuildID: 928EFE2954F68055**
 
@@ -12,6 +12,11 @@ You can download these mods alternatively at Gamebanana.
 
 Here is the [alternative download link](https://gamebanana.com/mods/502311)
 
+>[!NOTE]
+**On 03/23/2024 we found an issue regarding The Case of the Rainy-Day Plot Stage** so I have replaced the previous 60FPS + Uncap FPS mods. 
+
+If you downloaded them, please replace them. [HERE IS A VIDEO ABOUT HOW TO SOLVE THIS ISSUE](https://youtu.be/7v0XRf6j-8s?si=0Vdmla8BQeEfz0NK)
+
 ## More Princess Peach mods
 
 You can find **rest of Princess Peach mods at [Fl4sh_ Github](https://github.com/Fl4sh9174/Switch-Ultrawide-Mods)**
@@ -29,19 +34,27 @@ The only fix for now it's that if you have enough knowledge to build Ryujinx, do
 
 [Here's the PR + info](https://github.com/Ryujinx/Ryujinx/pull/6471#issue-2182256298) about the texture cache total size limit
 
-## Instructions
+## Instructions on how to download the files
 
 >[!TIP]
 Unlike using Control U/F1 or just disabling Vsync, these mods fix cutscenes locked at 24fps and allows you to play the game at 30/60/Uncap FPS with cutscenes fix included.
 
->[!NOTE]
-30fps + Uncap FPS are .zip files, so **just click on the .zip file and then click on View Raw** to start the download, then unzip the files into your mods directory and that's all.
+1. Click on the folder of the mod that you want to use. Then click on the .zip file 
+
+>[!CAUTION]
+**If you're going to use 60FPS or Uncap FPS mods, read carefully the instructions inside 60FPS/Uncap FPS folder**
+
+2. Now open your emulator (I suggest use Ryujinx). Right click on the game and Open Mod Data Location for Yuzu or clones/Open Mods Directory (Ryujinx).
+
+3. Paste the .zip file that you downloaded previously in this directory.
+
+4. Extract the zip file into this directory.
+
+5. Check that you have a folder named [60FPS v.1.0.0] for example and check that this folder contains more folders inside.
 
-1. Click on the folder of the mod that you want to use. Then click on the .pchtxt file and finally click on the arrow icon (Download Raw File) to download the mod.
-2. Now open your emulator (Yuzu or Ryujinx). Right click on the game and Open Mod Data Location (Yuzu)/Open Mods Directory (Ryujinx).
-3. Create a new folder in the directory you just opened and name it 60fps for instance. Open this folder and create another folder inside it. Name this new folder exefs. Finally open this last created folder and paste the corresponding .pchtxt file there.
+Also, don't forget to enable the necessary options that have been indicated in the corresponding mods folders.
 
-Your path should be something like this: `60fps\exefs\60fps.pchtxt`
+Finally your path should be something like this: `60fps\exefs\60fps.pchtxt`
 
 **Switch users**: You can convert  the .pchtxt file to .ips using [IPSwitch](https://github.com/3096/ipswitch) or just use [FPSLocker](https://github.com/masagrator/FPSLocker)