Written 2000 by Tobias Ernst and released to the Public Domain. Updated by Husky Team.
This archive contains a set of nodelist management utilities, in source code and, if you got a full distribution, also with binaries for some common operating systems. The following functionality is provided:
-
Compiling raw nodelists into a FIDOUSER.LST file, that can be used for nodelist lookup by sysop name, as supported by Msged and others.
-
Keeping your raw nodelists up to date, i.E. logic is provided to find the nodediff files that apply to your current nodelist files, and a tool to apply nodediffs to nodelists.
This package does NOT presently include something like a V7 nodelist compiler. Therefore, this package is enough if you are running an IP node, but you need additional software if you are running Binkley or some other software that requires an V7 nodelist index.
The tools can be compiled on Unix, as well as a lot of other platforms (OS/2, Win32, DOS/DJGPP), provided you have a working fidoconfig library and installation for that platform.
A major advantage of these tools on Unix is that they have no case sensitivity problems. I.e. nodelist files and nodelist updates are found no matter if they are in lower, capital, or MiXeD case.
These tools are written as an addition to the Husky suite of Fidonet software. The tools do not read a separate configuration file, but rather they read a common, global "Fidoconfig" configuration file. This does not mean that you need to install the whole Husky suite - you can just use the programs of this package stand alone if you like, because the precompiled binaries have the fidoconfig linked in statically.
But if you want to compile the tools, you do need the fidoconfig library. If you do not know what Fidoconfig is, visit Husky project or its homepage. This release of the nltools is designed to be built against fidoconfig. You will also require the huskylib and smapi libraries because of some header files only found therein.
If you only want to use the precompiled binaries, you must set the environment variable FIDOCONFIG to point to a fidoconfig-style configuration file, e.g. on OS/2, put SET FIDOCONFIG=e:\bbs\etc\fidoconf.cfg in your CONFIG.SYS file. On DOS, put the same command into autoexec.bat
The keywords that you can use in this configuration file will be explained below, in section V, or of course in the fidoconfig manual.
These tools expect the Nodelist and Nodediff files to be in the FTS-5000 (and obsoleted FTS-0005) defined format, that means: text lines that are finished with a CRLF sequence, and an EOF character after the last CRLF. This is normally true on any DOSish computer, and also on a Unix system if you just extract the distribution archives of Nodelist and Nodediff without giving some sort of auto conversion option. You might loose the CRs (^Ms) at the end when working with a text editor on these files, though. If the files do not have the ^M at the line end, the CRC checks will fail.
You normally do not need to call nlcrc manually, unless you are curious.
This simple tool checks the CRC checksum in a given Nodelist (not Nodediff!) file. Simply invoke it with the filename as argument:
nlcrc NODELIST.260
If there is not any output, the check succeeded and the return code will be zero. If the file does not contain a CRC checksum, a message will be printed to stderr and the return code will be 4. If a file I/O error or similar happens, a message will be printed to stderr and the return code will be 8. If the file has a checksum, but the check fails, a message will be printed to stderr and the return code will be 16.
You normally do not need to call nldiff manually. nldiff is designed to be called automatically by nlupdate.
This tool applies a Nodediff file to a given Nodelist. It has no intelligence as to determining which of multiple Nodediff files is the correct one (you have to use other tools for this), but it expects the Nodelist filename and the Nodediff filename as explicit arguments with the correct day file name extension, as for example in:
nldiff NODELIST.260 NODEDIFF.267
This will crate a new file NODELIST.267.
If you want the old file (NODELIST.260 in this case) to be deleted if the process succeeds (this means that no I/O errors occured and that the new nodelist file passes a CRC check), you can give the -n parameter:
nldiff -n NODELIST.260 NODEDIFF.267
If you also want the nodediff file (NODEDIFF.260) to be deleted, you can specify the -d parameter:
nldiff -d -n NODELIST.260 NODEDIFF.267
ulc is the Husky Fido Userlist Compiler. ulc reads all nodelists that are configured in Fidoconfig (via the "nodelist" keyword) and creates the FIDOUSER.LST file (the name has to be configured with the "fidouserlist" keyword). ulc does not take any command line options; it uses fidoconfig to determine where to find the nodelist files. A log file named "nltools.log" is placed in the fidoconfig log file directory.
The FIDOUSER.LST file format is defined as follows: The file consists of text record of fixed length (65 characters including the terminal \r\n sequence). The name of the sysop is left-aligned in the line in reverse order (e.g. "Tobias_Ernst" would become "Ernst, Tobias"). Aligned to the right of the record is the node number of the user. The records are sorted alphabetically, so that a program can use a binary search algorithm to find the corresponding node number for a given user name very fast.
The FIDOUSER.LST file format is supported by many mail readers, e.g. Timed and Msged. For Msged, FIDOUSER.LST is currently the best method to implement a node lookup at all, because Msged's V7 routines are flawed.
Nlupdate manages your nodelists and keeps them up to date. For each nodelist that you have configured with a "Nodelist" statement (see below), it will search the latest nodelist in the "NodelistDir", then caluclate the day number of the difference file that is needed to update this nodelist (the algorithm is Y2K safe and knows that 2000 is a leap year), then searches the difference file, unpacks it if necessary, and applies it to the nodelist using nldiff. nlupdate can also find full replacement files if you configure this, and just unpack them and copy them over the old nodelist. This is useful for othernets that do not have nodediff files. nlupdate can also process daily nodelists full updates if you configure this. - With only a few keywords, nlupdate manages the whole process of updating your nodelist files for you.
After you have set the configuration file up properly (see below), you just need to put the two commands
nlupdate ulc ;call your V7 index generator here if necessary
into your weekly maintainance script and all the nodelist tasks are done for you.
The following text describes the configuration statements in the fidoconfig file that control the behaviour of ulc and nlupdate. Just put the appropriate configuration statements into a text file and point the FIDOCONFIG environment variable to this file, or add the statements to your existing fidoconfig file if you have one.
LogFileDir
----------
Syntax: logFileDir <path>
Example: logFileDir /var/spool/fido/log
Where the logfile goes. This is a *path* name, the filename inside this
path is hardcoded to be "nltools.log".
MsgBaseDir
---------
Syntax: MsgBaseDir <patch>
Example: MsgBaseDir /var/spool/fido/msgbase
The nodelist tools do not use this, but you need to have it in the config
file. Just point it to any existing path. (Other Husky tools would place
files that store the message base in this directory).
NodelistDir
-----------
Syntax: nodelistDir <path>
Example: nodelistDir /var/spool/fido/nodelist
This command specifies the path where the actual nodelists are or should
be written to. This path contains the raw nodelist. Also, compiled
nodelists like the FIDOUSER.LST will be stored here.
This statement cannot be repeated.
Unpack
------
Syntax: Unpack "<unpacker command>" <id pos> <id bytes>
This configures the unpackers to use. It is crucial that you get these lines right. For details, please consider the Fidoconfig manual. Below, I simply give examples that work. I assume that you use the Freeware unrar (available for OS/2, DOS, Windows, and in Source for Unix), the Freeware Infozip unzip program (dito), and ARC 5.21. This last packer is required for Fidonet node diffs especially; you can get it by f'requesting ARC521_2.ZIP at 2:2476/418. This file contains a family mode executable (DOS + OS/2, also runs on Windows 95 and NT), as well as source code that can be compiled on Unix without major problems.
On Unix/Linux, use the following (adapt the path if necessary):
Unpack "/usr/local/bin/unzip -joLqq $a -d $p" 0 504b0304
Unpack "/usr/local/bin/unrar e -o+ -y -c- -p- $a $p/ >/dev/null" 0 52617221
Unpack "/usr/local/bin/arc eno $a $p'/*.*'" 0 1a
On DOS, OS/2 and Windows, use the following:
Unpack "unzip -joLqq $a -d $p" 0 504b0304
Unpack "unrar e -o+ -y -c- -p- $a $p\ >/dev/null" 0 52617221
Unpack "arc eno $a $p\*.*" 0 1a
FidoUserList
-------------
Syntax: fidoUserList <filename>
Example: fidoUserList fidouser.lst
If this keyword is present, the nodelist compiler (ulc) is instructed to build a user list file with the given filename in the nodelist directory (see nodelistdir). This is a simple text file with fixed line length that contains user names (nodes, points) and their corresponding node or pointnumbers. The file is sorted alphabetically by user name (case insensitive), so that it can be bsearched to implement a quick node numer lookup functinality. The fido user list file format is understood by Msged, for example.
NodeList
--------
Syntax: Nodelist <name>
Example: Nodelist points24
This statement starts a new nodelist definition. All the following nodelist-related stamtements change the configuration of this nodelist until a new nodeelist statement is found.
The name that you specify must match the base name (without extension and without pathname) of the raw, unpacked, nodelist file. The husky tools ulc and nlupdate match the file name case-insensitively, but other tools may need the exact spelling. The raw nodelist file is expected to reside in the nodelist directory (see nodelistdir)-
DiffUpdate
----------
Syntax: DiffUpdate <path_and_basename>
Example: DiffUpdate /var/spool/filebase/nodediff/nodediff
Here you can specify the base filename of nodelist difference files (nodediffs) that are used to keep the corresponding nodelist up to date. The argument to the DiffUpdate is the full file name with path of a difference file, without the file extension. For example, if you have a file area at /var/spool/filebase/24000, where your ticker places the updates for the German Pointlist, and those update files are called points24.a26, points24.a33, and so on, you would use
DiffUpdate /var/spool/filebase/24000/points24
The Diffupdate keyword is used by nlupdate, for example. The nodelist updater will unpack the difference file (if it is archived, of course, unpacked diffs are also supported), apply the diff to the corresponding nodelist, and delete the temporary unpacked diff again.
FullUpdate
----------
Syntax: FullUpdate <path_and_basename>
Example: FullUpdate /var/spool/filebase/nodelist/nodelist
This statement works like DiffUpdate. The difference is that here you don't specify the location of a nodelist difference file, but the locations where complete nodelist files/archives can be found. Some othernets do not (regularly) distribute a nodediff file, but just hatch a new nodelist every few weeks. In this case, you need the FullUpdate statement.
Dailynodelist
----------
Syntax: Dailynodelist <On/Off>
Example: Dailynodelist On
This statement tells nlupdate to process a daily nodelist. You have to set "FullUpdate" and "Dailynodelist" statements and not the "DiffUpdate" statement. With "Dailynodelist" set to "On", nlupdate does a full update of the nodelist on a daily basis, instead of checking if the new nodelist is 7 days newer.
Defaultzone
-----------
Syntax: DefaultZone <zone>
Example: DefaultZone 2
Some nodelist files do not start with a Zone entry. This is the case for the German Points24 list, for example, but could also happen for othernets that only have one zone. In this case, you can use the DefaultZone keyword to specify the default zone number for all nodes listed in this nodelist.
Nodelistformat
--------------
Syntax: Nodelistformat <format>
Example: NodelistFormat Standard
Example: NodelistFormat Points24
Example: NodelistFormat Points4D
Here you can specify the format of the unpacked nodelist. The default is "standard": this is the normal Fidonet nodelist format. You can also specify "points24", which is needed for the nodelist compiler to recognise a point list in the German points24 format as such, so that it can see the proper 4D point numbers instead of the fakenet numbers. Or you can specify "points4d", which means a 4D point list with "Boss" entries.
The following lines show a sample configuration file. If you are only interested in the nodelist tools, you can just copy those commands into a text file, modify them according to your needs (OS/2, Win and DOS users may of course use backslashes instead of forward slashes, and drive letters), and point the FIDOCONFIG variable to this file. If, on the other hand, you already have a fidoconfig installtion, you can copy these commands into your existing fidoconfig file.
NodelistDir /var/spool/fido/nodelist
FidoUserList fidouser.lst
Nodelist nodelist
DiffUpdate /var/spool/fido/filebase/nodediff/nodediff
NodelistFormat Standard
Nodelist points24
DiffUpdate /var/spool/fido/filebase/24000/pr24diff
DefaultZone 2
NodelistFormat Points24
You can compile nltools as part of the Husky project using the top level Makefile and a proper huskymak.cfg. This works particularly well and easy on Linux and other Unixes. Instructions on how to do this can be found in the "huskybse" package, in the file INSTALL.
The following instructions are for users that cannot use the huskymak.cfg way, but must use legacy makefiles.
- Download and compile SMAPI and FIDOCONFIG.
- Extract nltools on the same level as fidoconfig, e.g. you could have: ~/fido/smapi ~/fido/fidoconfig ~/fido/nltools
- Change to the src subdirectory.
- Select the proper makefile and rename it to "makefile". Edit it. Set the INSTDIR and LIBDIR variables according to your needs.
- Type "make"
- If you get an unresolved symbol error for "fexist", upgrade your fidoconfig source code to the latest git level.
- If it worked, type "make install" (Unix only)
- If you like, type "make clean".
These tools are donated to the Public Domain, which means that you can do with with the SOURCE CODE whatever you want, but also that the author does not take any responsibilites whatsoever.
In order to produce executables of the tools, you need the fidoconfig library (and I needed it as well). The fidoconfig library is not Public Domain, but it is covered by the GNU LIBRARY GENERAL PUBLIC LICENSE. A copy of this license can be found in the "legal" subdirectory. The binary executables of the nodelist tools therefore are also covered by the LGPL.
In order to comply with the LGPL, I hereby invite you to download the source code of both the nodelist tools and fidoconfig from https://github.com/huskyproject.
Questions are appropriate in the LINUX.FIDO.GER, FIDOSOFT.HUSKY, and FIDO_UTIL Fidonet echo conferences.
For more information see the Husky project and its homepage.