Fixed the T-Embed

boards/_New-Device-Model.ini

@@ -9,11 +9,7 @@
 ; https://docs.platformio.org/page/projectconf.html
 
 [env:NewDeviceModel]
-platform = espressif32 
-platform_packages =
-	framework-arduinoespressif32 @ https://github.com/bmorcelli/arduino-esp32/releases/download/2.0.17d/esp32-2.0.17d.zip
 board = _New-Device-Model
-framework = arduino
 board_build.partitions = custom_8Mb.csv
 build_flags =
 	${env.build_flags}
@@ -22,131 +18,7 @@ build_flags =
 	-DCORE_DEBUG_LEVEL=5
 	;-DARDUINO_USB_CDC_ON_BOOT=1  ; Used only in ESP32-S3 to make Serial Comands work
 
-	-DNEW_DEVICE=1 	;key for new device,
-					;mykeyboard.cpp: need map buttons an/or touchscreen and battery status value,
-					;settings.cpp:   need map brighness control
-					;main.cpp:		  need set startup
-					;serialcmds.cpp: need set power off command
-
-	;Features Enabled
-	# Config to use IRQ and RST pins of PN532, if needed
-	;-DPN532_RF_REST=-1
-	;-DPN532_IRQ=-1
-
-	;FM Radio
-	;-DFM_SI4713=1 ;Uncomment to activate FM Radio using Adafruit Si4713
-	-DFM_RSTPIN=40
-	;-DLITE_VERSION=1 ;limits some features to save space for M5Launcher Compatibility
-	;Microphone
-	;-DMIC_SPM1423=1 ;uncomment to enable Applicable for SPM1423 device
-	-DPIN_CLK=43
-	-DI2S_SCLK_PIN=43
-	-DI2S_DATA_PIN=46
-	-DPIN_DATA=46
-
-	;RGB LED runned by xylopyrographer/LiteLED@^1.2.0 library
-	;-DHAS_RGB_LED=1  ;uncomment to enable
-	-DRGB_LED=21
-
-	;Have RTC Chip
-	;-DHAS_RTC=1
-
-	;Speaker to run music, compatible with NS4168
-	;-DHAS_NS4168_SPKR=1 ;uncomment to enable
-	-DBCLK=41
-	-DWCLK=43
-	-DDOUT=42
-
-	;Can run USB as HID
-	;-DUSB_as_HID=1 ;uncomment to enable
-	-DBAD_TX=GROVE_SDA
-	-DBAD_RX=GROVE_SCL
-
-	;Battery ADC read pin
-	;-DBAT_PIN=10
-
-	;Buttons configuration
-	-DHAS_BTN=0
-	-DBTN_ALIAS='"Ok"'
-	-DBTN_PIN=0
-	-DBTN_ACT=LOw
-
-	;-DALLOW_ALL_GPIO_FOR_IR_RF=1 ; Set this option to make use of all GPIOs, from 1 to 44 to be chosen, except TFT and SD pins
-
-	;Infrared Led default pin and state
-	-DIR_TX_PINS='{{"M5 IR Mod", GROVE_SDA}, {"Pin 1", 1}, {"Pin 2", 2}}'
-	-DIR_RX_PINS='{{"M5 IR Mod", GROVE_SCL}, {"Pin 1", 1}, {"Pin 2", 2}}'
-	-DLED=-1		;NEED TO SET SOMETHING HERE, at least -1
-	-DLED_ON=HIGH
-	-DLED_OFF=LOW
-
-	;Radio Frequency (one pin modules) pin setting
-	-DRF_TX_PINS='{{"M5 RF433T", GROVE_SDA}, {"Pin 1", 1}, {"Pin 2", 2}}'
-	-DRF_RX_PINS='{{"M5 FR433R", GROVE_SCL}, {"Pin 1", 1}, {"Pin 2", 2}}'
-
-	;CC1101 SPI connection pins
-	; best connection pins for higher speed https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/api-reference/peripherals/spi_master.html#gpio-matrix-and-io-mux
-	;-DUSE_CC1101_VIA_SPI
-	-DCC1101_GDO0_PIN=9
-	-DCC1101_SS_PIN=10
-	-DCC1101_MOSI_PIN=SPI_MOSI_PIN
-	-DCC1101_SCK_PIN=SPI_SCK_PIN
-	-DCC1101_MISO_PIN=SPI_MISO_PIN
-	;-DCC1101_GDO2_PIN=14  ; optional
-
-	; connections are the same as CC1101
-	;-DUSE_NRF24_VIA_SPI
-	-DNRF24_CE_PIN=6
-	-DNRF24_SS_PIN=7  ; chip select
-	-DNRF24_MOSI_PIN=SPI_MOSI_PIN
-	-DNRF24_SCK_PIN=SPI_SCK_PIN
-	-DNRF24_MISO_PIN=SPI_MISO_PIN
-
-	;Font sizes, depending on device
-	-DFP=1
-	-DFM=2
-	-DFG=3
-
-	;Screen Setup
-	-DHAS_SCREEN=1
-	-DROTATION=1
-	-DBACKLIGHT=38
-	-DMINBRIGHT=160
-
-	;TFT_eSPI Setup
-	-DUSER_SETUP_LOADED=1
-	-DUSE_HSPI_PORT=1
-	-DST7789_2_DRIVER=1
-	-DTFT_RGB_ORDER=1
-	-DTFT_WIDTH=135
-	-DTFT_HEIGHT=240
-	-DTFT_BACKLIGHT_ON=1
-	-DTFT_BL=38
-	-DTFT_RST=33
-	-DTFT_DC=34
-	-DTFT_MOSI=35
-	-DTFT_SCLK=36
-	-DTFT_CS=37
-	-DTOUCH_CS=-1
-	-DSMOOTH_FONT=1
-	-DSPI_FREQUENCY=20000000
-	-DSPI_READ_FREQUENCY=20000000
-	-DSPI_TOUCH_FREQUENCY=2500000
-
-	;SD Card Setup pins
-	-DSDCARD_CS=12
-	-DSDCARD_SCK=40
-	-DSDCARD_MISO=39
-	-DSDCARD_MOSI=14
-
-	;Default I2C port
-	-DGROVE_SDA=2
-	-DGROVE_SCL=1
-
-	-DSPI_SCK_PIN=12
-	-DSPI_MOSI_PIN=11
-	-DSPI_MISO_PIN=13
-	-DSPI_SS_PIN=10
+
 
 lib_deps =
 	${env.lib_deps}

boards/lilygo-t-embed.ini

@@ -6,10 +6,9 @@ build_flags =
 	${env.build_flags}
 	-Iboards/lilygo-t-embed-cc1101
 	-Os
-	-mfix-esp32-psram-cache-issue
-	-mfix-esp32-psram-cache-strategy=memw
 	-DCORE_DEBUG_LEVEL=5
 	-DREDRAW_DELAY=1 # Used to improve navigation on menus for this device
+	-DMIC_SPM1423
 
 	;Infrared Led default pin and state
 	-DIR_TX_PINS='{{"Pin 16", 16},{"Pin 17", 17}, {"Pin 43", 43}, {"Pin 44", 44}}'

boards/lilygo-t-embed.json

@@ -8,6 +8,8 @@
     "core": "esp32",
     "extra_flags": [
       "-DT_EMBED",
+      "-mfix-esp32-psram-cache-issue",
+	    "-mfix-esp32-psram-cache-strategy=memw"
       "-DBOARD_HAS_PSRAM",
       "-DARDUINO_RUNNING_CORE=0",
       "-DARDUINO_EVENT_RUNNING_CORE=0",