Create a perpendicular-flap tutorial case for Dune

perpendicular-flap/solid-dune/README.md

@@ -0,0 +1,22 @@
+## Setup
+
+The solid-dune participant consists of the following files:
+
+* Dune module containing the files to build the tutorial
+* A file to run the tutorial
+* A cleanup file to delete the precice and paraview output
+* The mesh file containing the grid of the solid participant
+
+The Dune module depends on the Dune core modules, the Dune-preCICE adapter and
+on Dune-elastodynamics providing the necessary tools for structural simulation.
+
+It can be found here:
+https://github.com/maxfirmbach/dune-elastodynamics
+
+The Dune module can be build with:
+`<path-to-dune-common/bin/dunecontrol> --current all`
+
+The generated executable file solid-duneis found in:
+`dune-perpendicular-flap/build-cmake/src/`
+
+and needs to be copied to the solid-dune folder.

perpendicular-flap/solid-dune/Solid.msh

@@ -0,0 +1,154 @@
+$MeshFormat
+2.2 0 8
+$EndMeshFormat
+$Nodes
+64
+1 -0.05 0 -0.5
+2 -0.05 1 -0.5
+3 0.05 1 -0.5
+4 0.05 0 -0.5
+5 -0.05 0.0666666666665325 -0.5
+6 -0.05 0.1333333333330848 -0.5
+7 -0.05 0.1999999999995569 -0.5
+8 -0.05 0.266666666666029 -0.5
+9 -0.05 0.3333333333325011 -0.5
+10 -0.05 0.3999999999989731 -0.5
+11 -0.05 0.4666666666654452 -0.5
+12 -0.05 0.5333333333321025 -0.5
+13 -0.05 0.599999999998945 -0.5
+14 -0.05 0.6666666666657876 -0.5
+15 -0.05 0.73333333333263 -0.5
+16 -0.05 0.7999999999994725 -0.5
+17 -0.05 0.8666666666663151 -0.5
+18 -0.05 0.9333333333331575 -0.5
+19 -0.0166666666667507 1 -0.5
+20 0.01666666666657628 1 -0.5
+21 0.05 0.9333333333330558 -0.5
+22 0.05 0.866666666666204 -0.5
+23 0.05 0.8 -0.5
+24 0.05 0.7333333333337959 -0.5
+25 0.05 0.6666666666675918 -0.5
+26 0.05 0.6000000000013874 -0.5
+27 0.05 0.5333333333351832 -0.5
+28 0.05 0.466666666668609 -0.5
+29 0.05 0.4000000000016649 -0.5
+30 0.05 0.3333333333347207 -0.5
+31 0.05 0.2666666666677765 -0.5
+32 0.05 0.2000000000008324 -0.5
+33 0.05 0.1333333333338883 -0.5
+34 0.05 0.06666666666694399 -0.5
+35 0.0166666666667507 0 -0.5
+36 -0.01666666666657628 0 -0.5
+37 -0.0166666666665879 0.06666666666666968 -0.5
+38 0.01666666666673907 0.06666666666680683 -0.5
+39 -0.01666666666659953 0.1333333333333527 -0.5
+40 0.01666666666672744 0.1333333333336205 -0.5
+41 -0.01666666666661116 0.1999999999999821 -0.5
+42 0.01666666666671581 0.2000000000004072 -0.5
+43 -0.01666666666662279 0.2666666666666115 -0.5
+44 0.01666666666670419 0.266666666667194 -0.5
+45 -0.01666666666663442 0.333333333333241 -0.5
+46 0.01666666666669255 0.3333333333339808 -0.5
+47 -0.01666666666664605 0.3999999999998704 -0.5
+48 0.01666666666668092 0.4000000000007675 -0.5
+49 -0.01666666666665767 0.4666666666664998 -0.5
+50 0.01666666666666931 0.4666666666675544 -0.5
+51 -0.01666666666666929 0.5333333333331293 -0.5
+52 0.01666666666665767 0.5333333333341564 -0.5
+53 -0.01666666666668093 0.5999999999997592 -0.5
+54 0.01666666666664605 0.6000000000005733 -0.5
+55 -0.01666666666669255 0.666666666666389 -0.5
+56 0.01666666666663442 0.6666666666669904 -0.5
+57 -0.01666666666670419 0.7333333333330185 -0.5
+58 0.0166666666666228 0.7333333333334071 -0.5
+59 -0.01666666666671581 0.7999999999996483 -0.5
+60 0.01666666666661116 0.7999999999998242 -0.5
+61 -0.01666666666672744 0.8666666666662781 -0.5
+62 0.01666666666659953 0.8666666666662408 -0.5
+63 -0.01666666666673907 0.9333333333331235 -0.5
+64 0.0166666666665879 0.9333333333330895 -0.5
+$EndNodes
+$Elements
+81
+1 1 2 3 1 1 5
+2 1 2 3 1 5 6
+3 1 2 3 1 6 7
+4 1 2 3 1 7 8
+5 1 2 3 1 8 9
+6 1 2 3 1 9 10
+7 1 2 3 1 10 11
+8 1 2 3 1 11 12
+9 1 2 3 1 12 13
+10 1 2 3 1 13 14
+11 1 2 3 1 14 15
+12 1 2 3 1 15 16
+13 1 2 3 1 16 17
+14 1 2 3 1 17 18
+15 1 2 3 1 18 2
+16 1 2 3 2 2 19
+17 1 2 3 2 19 20
+18 1 2 3 2 20 3
+19 1 2 3 3 3 21
+20 1 2 3 3 21 22
+21 1 2 3 3 22 23
+22 1 2 3 3 23 24
+23 1 2 3 3 24 25
+24 1 2 3 3 25 26
+25 1 2 3 3 26 27
+26 1 2 3 3 27 28
+27 1 2 3 3 28 29
+28 1 2 3 3 29 30
+29 1 2 3 3 30 31
+30 1 2 3 3 31 32
+31 1 2 3 3 32 33
+32 1 2 3 3 33 34
+33 1 2 3 3 34 4
+34 1 2 1 4 4 35
+35 1 2 1 4 35 36
+36 1 2 1 4 36 1
+37 3 2 1 1 1 5 37 36
+38 3 2 1 1 36 37 38 35
+39 3 2 1 1 35 38 34 4
+40 3 2 1 1 5 6 39 37
+41 3 2 1 1 37 39 40 38
+42 3 2 1 1 38 40 33 34
+43 3 2 1 1 6 7 41 39
+44 3 2 1 1 39 41 42 40
+45 3 2 1 1 40 42 32 33
+46 3 2 1 1 7 8 43 41
+47 3 2 1 1 41 43 44 42
+48 3 2 1 1 42 44 31 32
+49 3 2 1 1 8 9 45 43
+50 3 2 1 1 43 45 46 44
+51 3 2 1 1 44 46 30 31
+52 3 2 1 1 9 10 47 45
+53 3 2 1 1 45 47 48 46
+54 3 2 1 1 46 48 29 30
+55 3 2 1 1 10 11 49 47
+56 3 2 1 1 47 49 50 48
+57 3 2 1 1 48 50 28 29
+58 3 2 1 1 11 12 51 49
+59 3 2 1 1 49 51 52 50
+60 3 2 1 1 50 52 27 28
+61 3 2 1 1 12 13 53 51
+62 3 2 1 1 51 53 54 52
+63 3 2 1 1 52 54 26 27
+64 3 2 1 1 13 14 55 53
+65 3 2 1 1 53 55 56 54
+66 3 2 1 1 54 56 25 26
+67 3 2 1 1 14 15 57 55
+68 3 2 1 1 55 57 58 56
+69 3 2 1 1 56 58 24 25
+70 3 2 1 1 15 16 59 57
+71 3 2 1 1 57 59 60 58
+72 3 2 1 1 58 60 23 24
+73 3 2 1 1 16 17 61 59
+74 3 2 1 1 59 61 62 60
+75 3 2 1 1 60 62 22 23
+76 3 2 1 1 17 18 63 61
+77 3 2 1 1 61 63 64 62
+78 3 2 1 1 62 64 21 22
+79 3 2 1 1 18 2 19 63
+80 3 2 1 1 63 19 20 64
+81 3 2 1 1 64 20 3 21
+$EndElements

perpendicular-flap/solid-dune/clean.sh

@@ -0,0 +1,6 @@
+#!/bin/sh
+set -e -u
+
+. ../../tools/cleaning-tools.sh
+
+clean_dune .

perpendicular-flap/solid-dune/dune-perpendicular-flap/CMakeLists.txt

@@ -0,0 +1,29 @@
+cmake_minimum_required(VERSION 3.13)
+project(dune-perpendicular-flap CXX)
+
+if(NOT (dune-common_DIR OR dune-common_ROOT OR
+      "${CMAKE_PREFIX_PATH}" MATCHES ".*dune-common.*"))
+    string(REPLACE  ${PROJECT_NAME} dune-common dune-common_DIR
+      ${PROJECT_BINARY_DIR})
+endif()
+
+#find dune-common and set the module path
+find_package(dune-common REQUIRED)
+list(APPEND CMAKE_MODULE_PATH "${PROJECT_SOURCE_DIR}/cmake/modules"
+  ${dune-common_MODULE_PATH})
+
+#include the dune macros
+include(DuneMacros)
+
+# start a dune project with information from dune.module
+dune_project()
+
+dune_enable_all_packages()
+
+add_subdirectory(src)
+add_subdirectory(dune)
+add_subdirectory(doc)
+add_subdirectory(cmake/modules)
+
+# finalize the dune project, e.g. generating config.h etc.
+finalize_dune_project(GENERATE_CONFIG_H_CMAKE)

perpendicular-flap/solid-dune/dune-perpendicular-flap/README

@@ -0,0 +1,53 @@
+Preparing the Sources
+=========================
+
+Additional to the software mentioned in README you'll need the
+following programs installed on your system:
+
+  cmake >= 3.13
+
+Getting started
+---------------
+
+If these preliminaries are met, you should run
+
+  dunecontrol all
+
+which will find all installed dune modules as well as all dune modules
+(not installed) which sources reside in a subdirectory of the current
+directory. Note that if dune is not installed properly you will either
+have to add the directory where the dunecontrol script resides (probably
+./dune-common/bin) to your path or specify the relative path of the script.
+
+Most probably you'll have to provide additional information to dunecontrol
+(e. g. compilers, configure options) and/or make options.
+
+The most convenient way is to use options files in this case. The files
+define four variables:
+
+CMAKE_FLAGS      flags passed to cmake (during configure)
+
+An example options file might look like this:
+
+#use this options to configure and make if no other options are given
+CMAKE_FLAGS=" \
+-DCMAKE_CXX_COMPILER=g++-5 \
+-DCMAKE_CXX_FLAGS='-Wall -pedantic' \
+-DCMAKE_INSTALL_PREFIX=/install/path" #Force g++-5 and set compiler flags
+
+If you save this information into example.opts you can pass the opts file to
+dunecontrol via the --opts option, e. g.
+
+  dunecontrol --opts=example.opts all
+
+More info
+---------
+
+See
+
+     dunecontrol --help
+
+for further options.
+
+
+The full build system is described in the dune-common/doc/buildsystem (Git version) or under share/doc/dune-common/buildsystem if you installed DUNE!

perpendicular-flap/solid-dune/dune-perpendicular-flap/cmake/modules/CMakeLists.txt

@@ -0,0 +1,3 @@
+set(modules "DunePerpendicularFlapMacros.cmake")
+
+install(FILES ${modules} DESTINATION ${DUNE_INSTALL_MODULEDIR})

perpendicular-flap/solid-dune/dune-perpendicular-flap/cmake/modules/DunePerpendicularFlapMacros.cmake

@@ -0,0 +1 @@
+# File for module specific CMake tests.

perpendicular-flap/solid-dune/dune-perpendicular-flap/config.h.cmake

@@ -0,0 +1,45 @@
+/* begin dune-perpendicular-flap
+   put the definitions for config.h specific to
+   your project here. Everything above will be
+   overwritten
+*/
+
+/* begin private */
+/* Name of package */
+#define PACKAGE "@DUNE_MOD_NAME@"
+
+/* Define to the address where bug reports for this package should be sent. */
+#define PACKAGE_BUGREPORT "@DUNE_MAINTAINER@"
+
+/* Define to the full name of this package. */
+#define PACKAGE_NAME "@DUNE_MOD_NAME@"
+
+/* Define to the full name and version of this package. */
+#define PACKAGE_STRING "@DUNE_MOD_NAME@ @DUNE_MOD_VERSION@"
+
+/* Define to the one symbol short name of this package. */
+#define PACKAGE_TARNAME "@DUNE_MOD_NAME@"
+
+/* Define to the home page for this package. */
+#define PACKAGE_URL "@DUNE_MOD_URL@"
+
+/* Define to the version of this package. */
+#define PACKAGE_VERSION "@DUNE_MOD_VERSION@"
+
+/* end private */
+
+/* Define to the version of dune-perpendicular-flap */
+#define DUNE_PERPENDICULAR_FLAP_VERSION "@DUNE_PERPENDICULAR_FLAP_VERSION@"
+
+/* Define to the major version of dune-perpendicular-flap */
+#define DUNE_PERPENDICULAR_FLAP_VERSION_MAJOR @DUNE_PERPENDICULAR_FLAP_VERSION_MAJOR@
+
+/* Define to the minor version of dune-perpendicular-flap */
+#define DUNE_PERPENDICULAR_FLAP_VERSION_MINOR @DUNE_PERPENDICULAR_FLAP_VERSION_MINOR@
+
+/* Define to the revision of dune-perpendicular-flap */
+#define DUNE_PERPENDICULAR_FLAP_VERSION_REVISION @DUNE_PERPENDICULAR_FLAP_VERSION_REVISION@
+
+/* end dune-perpendicular-flap
+   Everything below here will be overwritten
+*/

perpendicular-flap/solid-dune/dune-perpendicular-flap/doc/CMakeLists.txt

@@ -0,0 +1 @@
+add_subdirectory("doxygen")

perpendicular-flap/solid-dune/dune-perpendicular-flap/doc/doxygen/CMakeLists.txt

@@ -0,0 +1,2 @@
+# shortcut for creating the Doxyfile.in and Doxyfile
+add_doxygen_target()

perpendicular-flap/solid-dune/dune-perpendicular-flap/doc/doxygen/Doxylocal

@@ -0,0 +1,30 @@
+# This file contains local changes to the doxygen configuration
+# please use '+=' to add files/directories to the lists
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                 += @top_srcdir@/dune/
+# see e.g. dune-grid for the examples of mainpage and modules
+# INPUT                 += @srcdir@/mainpage \
+#                          @srcdir@/modules
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# be excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+# EXCLUDE               += @top_srcdir@/dune/perpendicular-flap/test
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+# EXAMPLE_PATH          += @top_srcdir@/src
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+# IMAGE_PATH            += @top_srcdir@/dune/perpendicular-flap/pics

perpendicular-flap/solid-dune/dune-perpendicular-flap/dune-perpendicular-flap.pc.in

@@ -0,0 +1,15 @@
+prefix=@prefix@
+exec_prefix=@exec_prefix@
+libdir=@libdir@
+includedir=@includedir@
+CXX=@CXX@
+CC=@CC@
+DEPENDENCIES=@REQUIRES@
+
+Name: @PACKAGE_NAME@
+Version: @VERSION@
+Description: dune-perpendicular-flap module
+URL: http://dune-project.org/
+Requires: dune-common dune-geometry dune-uggrid dune-grid dune-istl dune-functions dune-elastodynamics dune-precice
+Libs: -L${libdir}
+Cflags: -I${includedir}

perpendicular-flap/solid-dune/dune-perpendicular-flap/dune.module

@@ -0,0 +1,12 @@
+################################
+# Dune module information file #
+################################
+
+# Name of the module
+Module: dune-perpendicular-flap
+Version: 1.0
+Maintainer: [email protected]
+# Required build dependencies
+Depends: dune-common dune-geometry dune-uggrid dune-grid dune-istl dune-functions dune-elastodynamics dune-precice
+# Optional build dependencies
+#Suggests:

perpendicular-flap/solid-dune/dune-perpendicular-flap/dune/CMakeLists.txt

@@ -0,0 +1 @@
+add_subdirectory(perpendicular-flap)

perpendicular-flap/solid-dune/dune-perpendicular-flap/dune/perpendicular-flap/CMakeLists.txt

@@ -0,0 +1,2 @@
+#install headers
+install(FILES perpendicular-flap.hh DESTINATION ${CMAKE_INSTALL_INCLUDEDIR}/dune/perpendicular-flap)

perpendicular-flap/solid-dune/dune-perpendicular-flap/dune/perpendicular-flap/perpendicular-flap.hh

@@ -0,0 +1,6 @@
+#ifndef DUNE_PERPENDICULAR_FLAP_HH
+#define DUNE_PERPENDICULAR_FLAP_HH
+
+// add your classes here
+
+#endif // DUNE_PERPENDICULAR_FLAP_HH