dts: rp1: Re-enable DMA to RP1 UART0

Following the merging of [1], it is safe to re-enable DMA to UART0 without fear of losing data. Seen while looking at #6507. [1] dmaengine: dw-axi-dmac: Allow client-chosen width Signed-off-by: Phil Elwell <[email protected]>
raspberrypi · Jan 17, 2025 · 9cfa926 · 9cfa926
1 parent 1d1c140
commit 9cfa926
Showing 1 changed file with 3 additions and 3 deletions.
diff --git a/arch/arm64/boot/dts/broadcom/rp1.dtsi b/arch/arm64/boot/dts/broadcom/rp1.dtsi
@@ -65,9 +65,9 @@
 			interrupts = <RP1_INT_UART0 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rp1_clocks RP1_CLK_UART &rp1_clocks RP1_PLL_SYS_PRI_PH>;
 			clock-names = "uartclk", "apb_pclk";
-			// dmas = <&rp1_dma RP1_DMA_UART0_TX>,
-			//        <&rp1_dma RP1_DMA_UART0_RX>;
-			// dma-names = "tx", "rx";
+			dmas = <&rp1_dma RP1_DMA_UART0_TX>,
+			       <&rp1_dma RP1_DMA_UART0_RX>;
+			dma-names = "tx", "rx";
 			pinctrl-names = "default";
 			arm,primecell-periphid = <0x00541011>;
 			uart-has-rtscts;