Merge branch 'main' of github.com:ravynsoft/ravynos

tools/ravynOS/ravynOS_install.sh

@@ -0,0 +1,137 @@
+#!/bin/bash
+
+if [[ $EUID -ne 0 ]]; then
+   echo -e "\033[0;31mravynOS Installer must be run with sudo.\033[0m"
+   exit 1
+fi
+
+# ANSI escape codes for styling
+RED='\033[0;31m'
+GREEN='\033[0;32m'
+YELLOW='\033[0;33m'
+CYAN='\033[0;36m'
+WHITE='\033[0;97m'
+RESET='\033[0m'
+
+# Beautiful welcome message
+echo -e "${CYAN}"
+echo -e "=========================================="
+echo -e "  ${GREEN}Welcome to${CYAN} ravynOS ${GREEN}Setup for Developers${RESET}"
+echo -e "=========================================="
+echo -e "${YELLOW}Preparing your environment...${RESET}"
+echo -e "${CYAN}------------------------------------------${RESET}"
+echo -e "${RED}WARNING:${RESET} Before proceeding, make sure to run the command ${YELLOW}gpart destroy -F${RESET} (e.g., for devices like ${CYAN}ada0, da0, etc.${RESET})."
+
+# Prompt the user for the disk device name
+read -p "Enter the disk device name (e.g., ada0, da0, etc.): " device
+
+# Confirm the input
+echo "You selected the device: $device"
+read -p "Continue? (y/n): " confirm
+if [[ "$confirm" != "y" ]]; then
+    echo "Installation aborted."
+    exit 1
+fi
+
+# Delete existing partitions and create a new GPT
+echo "Preparing the device..."
+gpart create -s gpt $device
+
+# Create an EFI partition
+echo "Creating EFI partition..."
+gpart add -t efi -l efi -s 256M $device
+newfs_msdos /dev/${device}p1
+
+# Create a swap partition
+echo "Creating swap partition..."
+gpart add -t freebsd-swap -s 4G $device
+
+# Create a ZFS partition
+echo "Creating ZFS partition..."
+gpart add -t freebsd-zfs -l ravynOS $device
+
+# Initialize the ZFS pool
+echo "Initializing ZFS pool..."
+zpool create -f -R /mnt -O mountpoint=/ -O atime=off -O canmount=off -O compression=on ravynOS /dev/${device}p3
+
+# Create ZFS datasets
+echo "Creating ZFS datasets..."
+zfs create -o canmount=off -o mountpoint=none ravynOS/ROOT
+zfs create -o mountpoint=/ ravynOS/ROOT/default
+
+# Prepare EFI boot files
+echo "Preparing EFI boot files..."
+zpool set bootfs=ravynOS/ROOT/default ravynOS
+mkdir /tmp/efi
+mount -t msdosfs /dev/${device}p1 /tmp/efi
+mkdir -p /tmp/efi/efi/boot
+cp /boot/loader.efi /tmp/efi/efi/boot/bootx64.efi
+cp /boot/loader.efi /tmp/efi/efi/boot/loader.efi
+umount /tmp/efi
+
+# Exclude unnecessary directories
+cat >> /tmp/excludes <<EOF
+/dev
+/proc
+/tmp
+EOF
+
+echo "Installing ravynOS... This process may take several minutes, please wait."
+echo "Relax and have a coffee while ravynOS is installing on your computer."
+cd /sysroot
+cpdup -uIof -X /tmp/excludes . /mnt
+
+# Enter the chroot environment
+chroot /mnt /bin/sh <<'EOF'
+
+# Perform configuration
+/usr/sbin/bsdinstall config
+/usr/sbin/bsdinstall entropy
+
+# Remove temporary user liveuser
+/usr/sbin/pw userdel -n liveuser
+/usr/sbin/pw groupdel -n liveuser
+rm -rf /Users/liveuser
+
+# Create a new user 'dev' with password 'temp'
+echo "Creating user dev with password temp..."
+/usr/sbin/pw useradd -n dev -s /bin/sh -m -G wheel -h 0 <<'USER_PASS'
+temp
+USER_PASS
+
+# Move rc.conf.local file
+mv /etc/rc.conf.local /etc/rc.conf
+
+# Configure /etc/rc.conf using sysrc
+echo "Configuring ravynOS..."
+sysrc zfs_enable=YES
+sysrc zfsd_enable=YES
+
+# Configure /boot/loader.conf
+echo "Configuring ravynOS bootloader..."
+cat <<'LOADER_CONF' >> /boot/loader.conf
+cryptodev_load="YES"
+zfs_load="YES"
+beastie_disable="YES"
+autoboot_delay="3"
+vfs.root.mountfrom.options="rw"
+vfs.root.mountfrom="zfs:ravynOS/ROOT/default"
+LOADER_CONF
+
+# Set the timezone
+echo "Setting the timezone..."
+cp /usr/share/zoneinfo/UTC /etc/localtime
+EOF
+
+# Finish installation
+echo -e "${YELLOW}Attention!${RESET} User: ${CYAN}dev${RESET}. Password: ${CYAN}temp${RESET}. Please change the password after rebooting using ${CYAN}passwd dev${RESET}."
+echo -e "Installation completed."
+
+# Prompt the user to reboot
+read -p "Would you like to reboot now? (y/N): " reboot_choice
+if [ "$reboot_choice" = "y" ] || [ "$reboot_choice" = "Y" ]; then
+    echo "Rebooting..."
+    reboot
+else
+    echo "Reboot canceled. Please reboot manually when ready."
+fi