warning: empty `loop {}` wastes CPU cycles
   --> boards/sensor/src/main.rs:167:9
    |
167 |         loop {}
    |         ^^^^^^^
    |
    = help: you should either use `panic!()` or add a call pausing or sleeping the thread to the loop body
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#empty_loop
    = note: `#[warn(clippy::empty_loop)]` on by default

warning: using `clone` on type `[u8; 1024]` which implements the `Copy` trait
   --> boards/sensor/src/sbg_manager.rs:134:33
    |
134 |                 let buf_clone = buf.clone();
    |                                 ^^^^^^^^^^^ help: try dereferencing it: `*buf`
    |
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#clone_on_copy
    = note: `#[warn(clippy::clone_on_copy)]` on by default

warning: this function has too many arguments (8/7)
  --> boards/sensor/src/communication.rs:64:5
   |
64 | /     pub fn new<S>(
65 | |         can_rx: Pin<PA23, AlternateI>,
66 | |         can_tx: Pin<PA22, AlternateI>,
67 | |         pclk_can: Pclk<Can0, Gclk0Id>,
...  |
72 | |         loopback: bool,
73 | |     ) -> (Self, S::Inc)
   | |_______________________^
   |
   = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#too_many_arguments
   = note: `#[warn(clippy::too_many_arguments)]` on by default

warning: very complex type used. Consider factoring parts into `type` definitions
  --> boards/sensor/src/communication.rs:54:14
   |
54 |       pub can: Can<
   |  ______________^
55 | |         'static,
56 | |         Can0,
57 | |         Dependencies<Can0, Gclk0Id, Pin<PA23, Alternate<I>>, Pin<PA22, Alternate<I>>, CAN0>,
58 | |         Capacities,
59 | |     >,
   | |_____^
   |
   = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#type_complexity
   = note: `#[warn(clippy::type_complexity)]` on by default

warning: very complex type used. Consider factoring parts into `type` definitions
  --> boards/communication/src/main.rs:60:21
   |
60 |           sd_manager: SdManager<
   |  _____________________^
61 | |             Spi<
62 | |                 Config<
63 | |                     Pads<
...  |
73 | |             Pin<PB14, Output<PushPull>>,
74 | |         >,
   | |_________^
   |
   = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#type_complexity

warning: this expression creates a reference which is immediately dereferenced by the compiler
   --> boards/communication/src/main.rs:253:42
    |
253 |                 manager.write(&mut file, &msg_ser)?;
    |                                          ^^^^^^^^ help: change this to: `msg_ser`
    |
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrow

warning: this expression creates a reference which is immediately dereferenced by the compiler
   --> boards/communication/src/main.rs:250:42
    |
250 |                 manager.write(&mut file, &msg_ser)?;
    |                                          ^^^^^^^^ help: change this to: `msg_ser`
    |
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrow
    = note: `#[warn(clippy::needless_borrow)]` on by default

warning: empty `loop {}` wastes CPU cycles
   --> boards/communication/src/main.rs:200:9
    |
200 |         loop {}
    |         ^^^^^^^
    |
    = help: you should either use `panic!()` or add a call pausing or sleeping the thread to the loop body
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#empty_loop
    = note: `#[warn(clippy::empty_loop)]` on by default

warning: this function has too many arguments (11/7)
  --> boards/communication/src/health.rs:58:5
   |
58 | /     pub fn new(
59 | |         reader: Adc<ADC0>,
60 | |         reader1: Adc<ADC1>,
61 | |         pin_3v3: Pin<PB01, Alternate<B>>,
...  |
69 | |         pin_failover: Pin<PB05, Alternate<B>>,
70 | |     ) -> Self {
   | |_____________^
   |
   = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#too_many_arguments

warning: unneeded `return` statement
  --> boards/communication/src/data_manager.rs:52:9
   |
52 |         return RadioRate::Slow;
   |         ^^^^^^^^^^^^^^^^^^^^^^
   |
   = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return
help: remove `return`
   |
52 -         return RadioRate::Slow;
52 +         RadioRate::Slow
   |

warning: unneeded `return` statement
   --> boards/communication/src/communication.rs:311:13
    |
311 |             return Err(mavlink::error::MessageReadError::Io.into());
    |             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    |
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return
help: remove `return`
    |
311 -             return Err(mavlink::error::MessageReadError::Io.into());
311 +             Err(mavlink::error::MessageReadError::Io.into())
    |

warning: unneeded `return` statement
   --> boards/communication/src/communication.rs:307:21
    |
307 |                     return Err(mavlink::error::MessageReadError::Io.into());
    |                     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    |
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return
help: remove `return`
    |
307 -                     return Err(mavlink::error::MessageReadError::Io.into());
307 +                     Err(mavlink::error::MessageReadError::Io.into())
    |

warning: unneeded `return` statement
   --> boards/communication/src/communication.rs:302:21
    |
302 |                     return Ok(postcard::from_bytes::<Message>(&msg.message)?);
    |                     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    |
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return
    = note: `#[warn(clippy::needless_return)]` on by default
help: remove `return`
    |
302 -                     return Ok(postcard::from_bytes::<Message>(&msg.message)?);
302 +                     Ok(postcard::from_bytes::<Message>(&msg.message)?)
    |

warning: this function has too many arguments (8/7)
  --> boards/communication/src/communication.rs:72:5
   |
72 | /     pub fn new<S>(
73 | |         can_rx: Pin<PA23, AlternateI>,
74 | |         can_tx: Pin<PA22, AlternateI>,
75 | |         pclk_can: Pclk<Can0, Gclk0Id>,
...  |
80 | |         loopback: bool,
81 | |     ) -> (Self, S::Inc)
   | |_______________________^
   |
   = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#too_many_arguments
   = note: `#[warn(clippy::too_many_arguments)]` on by default

warning: very complex type used. Consider factoring parts into `type` definitions
  --> boards/communication/src/communication.rs:62:14
   |
62 |       pub can: Can<
   |  ______________^
63 | |         'static,
64 | |         Can0,
65 | |         Dependencies<Can0, Gclk0Id, Pin<PA23, Alternate<I>>, Pin<PA22, Alternate<I>>, CAN0>,
66 | |         Capacities,
67 | |     >,
   | |_____^
   |
   = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#type_complexity
   = note: `#[warn(clippy::type_complexity)]` on by default

warning: you seem to be trying to use `match` for an equality check. Consider using `if`
   --> libraries/sbg-rs/src/sbg.rs:479:5
    |
479 | /     match logType {
480 | |         // silently handle errors
481 | |         // _SbgDebugLogType_SBG_DEBUG_LOG_TYPE_ERROR => error!("SBG Error"),
482 | |         _SbgDebugLogType_SBG_DEBUG_LOG_TYPE_WARNING => warn!("SBG Warning"),
...   |
485 | |         _ => (),
486 | |     };
    | |_____^ help: try: `if logType == _SbgDebugLogType_SBG_DEBUG_LOG_TYPE_WARNING { warn!("SBG Warning") }`
    |
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#single_match
    = note: `#[warn(clippy::single_match)]` on by default

warning: unsafe function's docs miss `# Safety` section
   --> libraries/sbg-rs/src/sbg.rs:459:1
    |
459 | / pub unsafe extern "C" fn sbgPlatformDebugLogMsg(
460 | |     _pFileName: *const ::core::ffi::c_char,
461 | |     _pFunctionName: *const ::core::ffi::c_char,
462 | |     _line: u32,
...   |
466 | |     _pFormat: *const ::core::ffi::c_char,
467 | | ) {
    | |_^
    |
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#missing_safety_doc

warning: unneeded `return` statement
   --> libraries/sbg-rs/src/sbg.rs:421:23
    |
421 |             Err(_) => return _SbgErrorCode_SBG_READ_ERROR,
    |                       ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    |
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return
help: remove `return`
    |
421 |             Err(_) => _SbgErrorCode_SBG_READ_ERROR,
    |                       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~

warning: unneeded `return` statement
   --> libraries/sbg-rs/src/sbg.rs:420:22
    |
420 |             Ok(_) => return _SbgErrorCode_SBG_NO_ERROR,
    |                      ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    |
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return
help: remove `return`
    |
420 |             Ok(_) => _SbgErrorCode_SBG_NO_ERROR,
    |                      ~~~~~~~~~~~~~~~~~~~~~~~~~~

warning: unsafe function's docs miss `# Safety` section
   --> libraries/sbg-rs/src/sbg.rs:406:5
    |
406 | /     pub unsafe extern "C" fn SbgFlushFunc(
407 | |         pInterface: *mut _SbgInterface,
408 | |         _flags: u32,
409 | |     ) -> _SbgErrorCode {
    | |______________________^
    |
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#missing_safety_doc

warning: unsafe function's docs miss `# Safety` section
   --> libraries/sbg-rs/src/sbg.rs:354:5
    |
354 | /     pub unsafe extern "C" fn SbgEComReceiveLogFunc(
355 | |         _pHandle: *mut _SbgEComHandle,
356 | |         msgClass: u32,
357 | |         msg: u32,
358 | |         pLogData: *const _SbgBinaryLogData,
359 | |         _pUserArg: *mut c_void,
360 | |     ) -> _SbgErrorCode {
    | |______________________^
    |
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#missing_safety_doc

warning: unsafe function's docs miss `# Safety` section
   --> libraries/sbg-rs/src/sbg.rs:315:5
    |
315 | /     pub unsafe extern "C" fn SbgInterfaceWriteFunc(
316 | |         pInterface: *mut _SbgInterface,
317 | |         pBuffer: *const c_void,
318 | |         bytesToWrite: usize,
319 | |     ) -> _SbgErrorCode {
    | |______________________^
    |
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#missing_safety_doc

warning: the loop variable `i` is only used to index `array`
   --> libraries/sbg-rs/src/sbg.rs:298:18
    |
298 |         for i in 0..(bytesToRead) {
    |                  ^^^^^^^^^^^^^^^^
    |
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_range_loop
    = note: `#[warn(clippy::needless_range_loop)]` on by default
help: consider using an iterator
    |
298 |         for <item> in array.iter_mut().take((bytesToRead)) {
    |             ~~~~~~    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

warning: unneeded `return` statement
   --> libraries/sbg-rs/src/sbg.rs:309:9
    |
309 |         return _SbgErrorCode_SBG_NO_ERROR;
    |         ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    |
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_return
    = note: `#[warn(clippy::needless_return)]` on by default
help: remove `return`
    |
309 -         return _SbgErrorCode_SBG_NO_ERROR;
309 +         _SbgErrorCode_SBG_NO_ERROR
    |

warning: unsafe function's docs miss `# Safety` section
   --> libraries/sbg-rs/src/sbg.rs:281:5
    |
281 | /     pub unsafe extern "C" fn SbgInterfaceReadFunc(
282 | |         _pInterface: *mut _SbgInterface,
283 | |         pBuffer: *mut c_void,
284 | |         pBytesRead: *mut usize,
285 | |         bytesToRead: usize,
286 | |     ) -> _SbgErrorCode {
    | |______________________^
    |
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#missing_safety_doc
    = note: `#[warn(clippy::missing_safety_doc)]` on by default