Dev -> Master 2.7.0

.devcontainer/devcontainer.json

@@ -10,15 +10,7 @@
         "vscode": {
             // Set *default* container specific settings.json values on container create.
             "settings": {
-                "python.defaultInterpreterPath": "/opt/conda/bin/python",
-                "python.linting.enabled": true,
-                "python.linting.pylintEnabled": true,
-                "python.formatting.autopep8Path": "/opt/conda/bin/autopep8",
-                "python.formatting.yapfPath": "/opt/conda/bin/yapf",
-                "python.linting.flake8Path": "/opt/conda/bin/flake8",
-                "python.linting.pycodestylePath": "/opt/conda/bin/pycodestyle",
-                "python.linting.pydocstylePath": "/opt/conda/bin/pydocstyle",
-                "python.linting.pylintPath": "/opt/conda/bin/pylint"
+                "python.defaultInterpreterPath": "/opt/conda/bin/python"
             },
 
             // Add the IDs of extensions you want installed when the container is created.

.editorconfig

@@ -18,7 +18,16 @@ end_of_line = unset
 insert_final_newline = unset
 trim_trailing_whitespace = unset
 indent_style = unset
-indent_size = unset
+[/subworkflows/nf-core/**]
+charset = unset
+end_of_line = unset
+insert_final_newline = unset
+trim_trailing_whitespace = unset
+indent_style = unset
 
 [/assets/email*]
 indent_size = unset
+
+# ignore python and markdown
+[*.{py,md}]
+indent_style = unset

.github/CONTRIBUTING.md

@@ -9,9 +9,8 @@ Please use the pre-filled template to save time.
 However, don't be put off by this template - other more general issues and suggestions are welcome!
 Contributions to the code are even more welcome ;)
 
-:::info
-If you need help using or modifying nf-core/methylseq then the best place to ask is on the nf-core Slack [#methylseq](https://nfcore.slack.com/channels/methylseq) channel ([join our Slack here](https://nf-co.re/join/slack)).
-:::
+> [!NOTE]
+> If you need help using or modifying nf-core/methylseq then the best place to ask is on the nf-core Slack [#methylseq](https://nfcore.slack.com/channels/methylseq) channel ([join our Slack here](https://nf-co.re/join/slack)).
 
 ## Contribution workflow
 
@@ -20,15 +19,18 @@ If you'd like to write some code for nf-core/methylseq, the standard workflow is
 1. Check that there isn't already an issue about your idea in the [nf-core/methylseq issues](https://github.com/nf-core/methylseq/issues) to avoid duplicating work. If there isn't one already, please create one so that others know you're working on this
 2. [Fork](https://help.github.com/en/github/getting-started-with-github/fork-a-repo) the [nf-core/methylseq repository](https://github.com/nf-core/methylseq) to your GitHub account
 3. Make the necessary changes / additions within your forked repository following [Pipeline conventions](#pipeline-contribution-conventions)
-4. Use `nf-core schema build` and add any new parameters to the pipeline JSON schema (requires [nf-core tools](https://github.com/nf-core/tools) >= 1.10).
+4. Use `nf-core pipelines schema build` and add any new parameters to the pipeline JSON schema (requires [nf-core tools](https://github.com/nf-core/tools) >= 1.10).
 5. Submit a Pull Request against the `dev` branch and wait for the code to be reviewed and merged
 
 If you're not used to this workflow with git, you can start with some [docs from GitHub](https://help.github.com/en/github/collaborating-with-issues-and-pull-requests) or even their [excellent `git` resources](https://try.github.io/).
 
 ## Tests
 
-You can optionally test your changes by running the pipeline locally. Then it is recommended to use the `debug` profile to
-receive warnings about process selectors and other debug info. Example: `nextflow run . -profile debug,test,docker --outdir <OUTDIR>`.
+You have the option to test your changes locally by running the pipeline. For receiving warnings about process selectors and other `debug` information, it is recommended to use the debug profile. Execute all the tests with the following command:
+
+```bash
+nf-test test --profile debug,test,docker --verbose
+```
 
 When you create a pull request with changes, [GitHub Actions](https://github.com/features/actions) will run automatic tests.
 Typically, pull-requests are only fully reviewed when these tests are passing, though of course we can help out before then.
@@ -38,7 +40,7 @@ There are typically two types of tests that run:
 ### Lint tests
 
 `nf-core` has a [set of guidelines](https://nf-co.re/developers/guidelines) which all pipelines must adhere to.
-To enforce these and ensure that all pipelines stay in sync, we have developed a helper tool which runs checks on the pipeline code. This is in the [nf-core/tools repository](https://github.com/nf-core/tools) and once installed can be run locally with the `nf-core lint <pipeline-directory>` command.
+To enforce these and ensure that all pipelines stay in sync, we have developed a helper tool which runs checks on the pipeline code. This is in the [nf-core/tools repository](https://github.com/nf-core/tools) and once installed can be run locally with the `nf-core pipelines lint <pipeline-directory>` command.
 
 If any failures or warnings are encountered, please follow the listed URL for more documentation.
 
@@ -73,7 +75,7 @@ If you wish to contribute a new step, please use the following coding standards:
 2. Write the process block (see below).
 3. Define the output channel if needed (see below).
 4. Add any new parameters to `nextflow.config` with a default (see below).
-5. Add any new parameters to `nextflow_schema.json` with help text (via the `nf-core schema build` tool).
+5. Add any new parameters to `nextflow_schema.json` with help text (via the `nf-core pipelines schema build` tool).
 6. Add sanity checks and validation for all relevant parameters.
 7. Perform local tests to validate that the new code works as expected.
 8. If applicable, add a new test command in `.github/workflow/ci.yml`.
@@ -84,13 +86,13 @@ If you wish to contribute a new step, please use the following coding standards:
 
 Parameters should be initialised / defined with default values in `nextflow.config` under the `params` scope.
 
-Once there, use `nf-core schema build` to add to `nextflow_schema.json`.
+Once there, use `nf-core pipelines schema build` to add to `nextflow_schema.json`.
 
 ### Default processes resource requirements
 
-Sensible defaults for process resource requirements (CPUs / memory / time) for a process should be defined in `conf/base.config`. These should generally be specified generic with `withLabel:` selectors so they can be shared across multiple processes/steps of the pipeline. A nf-core standard set of labels that should be followed where possible can be seen in the [nf-core pipeline template](https://github.com/nf-core/tools/blob/master/nf_core/pipeline-template/conf/base.config), which has the default process as a single core-process, and then different levels of multi-core configurations for increasingly large memory requirements defined with standardised labels.
+Sensible defaults for process resource requirements (CPUs / memory / time) for a process should be defined in `conf/base.config`. These should generally be specified generic with `withLabel:` selectors so they can be shared across multiple processes/steps of the pipeline. A nf-core standard set of labels that should be followed where possible can be seen in the [nf-core pipeline template](https://github.com/nf-core/tools/blob/main/nf_core/pipeline-template/conf/base.config), which has the default process as a single core-process, and then different levels of multi-core configurations for increasingly large memory requirements defined with standardised labels.
 
-The process resources can be passed on to the tool dynamically within the process with the `${task.cpu}` and `${task.memory}` variables in the `script:` block.
+The process resources can be passed on to the tool dynamically within the process with the `${task.cpus}` and `${task.memory}` variables in the `script:` block.
 
 ### Naming schemes
 
@@ -101,7 +103,7 @@ Please use the following naming schemes, to make it easy to understand what is g
 
 ### Nextflow version bumping
 
-If you are using a new feature from core Nextflow, you may bump the minimum required version of nextflow in the pipeline with: `nf-core bump-version --nextflow . [min-nf-version]`
+If you are using a new feature from core Nextflow, you may bump the minimum required version of nextflow in the pipeline with: `nf-core pipelines bump-version --nextflow . [min-nf-version]`
 
 ### Images and figures
 

.github/PULL_REQUEST_TEMPLATE.md

@@ -17,7 +17,7 @@ Learn more about contributing: [CONTRIBUTING.md](https://github.com/nf-core/meth
 - [ ] If you've fixed a bug or added code that should be tested, add tests!
 - [ ] If you've added a new tool - have you followed the pipeline conventions in the [contribution docs](https://github.com/nf-core/methylseq/tree/master/.github/CONTRIBUTING.md)
 - [ ] If necessary, also make a PR on the nf-core/methylseq _branch_ on the [nf-core/test-datasets](https://github.com/nf-core/test-datasets) repository.
-- [ ] Make sure your code lints (`nf-core lint`).
+- [ ] Make sure your code lints (`nf-core pipelines lint`).
 - [ ] Ensure the test suite passes (`nextflow run . -profile test,docker --outdir <OUTDIR>`).
 - [ ] Check for unexpected warnings in debug mode (`nextflow run . -profile debug,test,docker --outdir <OUTDIR>`).
 - [ ] Usage Documentation in `docs/usage.md` is updated.

.github/workflows/awsfulltest.yml

@@ -1,22 +1,40 @@
 name: nf-core AWS full size tests
-# This workflow is triggered on published releases.
+# This workflow is triggered on PRs opened against the master branch.
 # It can be additionally triggered manually with GitHub actions workflow dispatch button.
 # It runs the -profile 'test_full' on AWS batch
 
 on:
-  release:
-    types: [published]
+  pull_request:
+    branches:
+      - master
   workflow_dispatch:
+  pull_request_review:
+    types: [submitted]
+
 jobs:
-  run-tower:
+  run-platform:
     name: Run AWS full tests
-    if: github.repository == 'nf-core/methylseq'
+    # run only if the PR is approved by at least 2 reviewers and against the master branch or manually triggered
+    if: github.repository == 'nf-core/methylseq' && github.event.review.state == 'approved' && github.event.pull_request.base.ref == 'master' || github.event_name == 'workflow_dispatch'
     runs-on: ubuntu-latest
     strategy:
       matrix:
         aligner: ["bismark", "bismark_hisat", "bwameth"]
     steps:
-      - name: Launch workflow via tower
+      - uses: octokit/[email protected]
+        if: github.event_name != 'workflow_dispatch'
+        id: check_approvals
+        with:
+          route: GET /repos/${{ github.repository }}/pulls/${{ github.event.pull_request.number }}/reviews?per_page=100
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+      - id: test_variables
+        if: github.event_name != 'workflow_dispatch'
+        run: |
+          JSON_RESPONSE='${{ steps.check_approvals.outputs.data }}'
+          CURRENT_APPROVALS_COUNT=$(echo $JSON_RESPONSE | jq -c '[.[] | select(.state | contains("APPROVED")) ] | length')
+          test $CURRENT_APPROVALS_COUNT -ge 2 || exit 1 # At least 2 approvals are required
+      - name: Launch workflow via Seqera Platform
         uses: seqeralabs/action-tower-launch@v2
         with:
           workspace_id: ${{ secrets.TOWER_WORKSPACE_ID }}
@@ -27,14 +45,14 @@ jobs:
           parameters: |
             {
               "hook_url": "${{ secrets.MEGATESTS_ALERTS_SLACK_HOOK_URL }}",
-              "outdir": "s3://${{ secrets.AWS_S3_BUCKET }}/methylseq/results-${{ github.sha }}/${{matrix.aligner}}"
+              "outdir": "s3://${{ secrets.AWS_S3_BUCKET }}/methylseq/results-${{ github.sha }}/${{matrix.aligner}}",
               "aligner": "${{ matrix.aligner }}",
             }
           profiles: test_full
 
-      - uses: actions/upload-artifact@v3
+      - uses: actions/upload-artifact@v4
         with:
-          name: Tower debug log file
+          name: Seqera Platform debug log file
           path: |
-            tower_action_*.log
-            tower_action_*.json
+            seqera_platform_action_*.log
+            seqera_platform_action_*.json

.github/workflows/awstest.yml

@@ -5,16 +5,16 @@ name: nf-core AWS test
 on:
   workflow_dispatch:
 jobs:
-  run-tower:
+  run-platform:
     name: Run AWS tests
     if: github.repository == 'nf-core/methylseq'
     runs-on: ubuntu-latest
     strategy:
       matrix:
         aligner: ["bismark", "bismark_hisat", "bwameth"]
     steps:
-      # Launch workflow using Tower CLI tool action
-      - name: Launch workflow via tower
+      # Launch workflow using Seqera Platform CLI tool action
+      - name: Launch workflow via Seqera Platform
         uses: seqeralabs/action-tower-launch@v2
         with:
           workspace_id: ${{ secrets.TOWER_WORKSPACE_ID }}
@@ -29,9 +29,9 @@ jobs:
             }
           profiles: test
 
-      - uses: actions/upload-artifact@v3
+      - uses: actions/upload-artifact@v4
         with:
-          name: Tower debug log file
+          name: Seqera Platform debug log file
           path: |
-            tower_action_*.log
-            tower_action_*.json
+            seqera_platform_action_*.log
+            seqera_platform_action_*.json

.github/workflows/branch.yml

@@ -19,7 +19,7 @@ jobs:
       # NOTE - this doesn't currently work if the PR is coming from a fork, due to limitations in GitHub actions secrets
       - name: Post PR comment
         if: failure()
-        uses: mshick/add-pr-comment@v1
+        uses: mshick/add-pr-comment@b8f338c590a895d50bcbfa6c5859251edc8952fc # v2
         with:
           message: |
             ## This PR is against the `master` branch :x: